The objective of this study was to evaluate the effect of wheat–oat flour ratio on the physical properties and β-glucan characteristics of extrudates. Results showed that increasing the wheat–oat flour ratio resulted in a decrease in the water solubility index (r2=0.8567) and hardness (r2=0.9316), whereas the expansion ratio (r2=0.9307) and water absorption index (r2=0.9061) increased. Wheat flour generally caused an increase in L values from 57.81 to 62.94 providing bright samples. Few cells were observed at high wheat–oat flour ratios under a scanning electron microscope, and a smooth surface was noted. Meanwhile, the total (r2=0.9867) and soluble (r2=0.9848) β-glucan contents were inversely proportional to the wheat–oat flour ratio. Extrudates with added wheat flour had a high molecular weight, but wheat flour had no significant (P<0.05) effect on the viscosity of β-glucan extracts. Conclusively, incorporation of wheat flour at a wheat–oat flour ratio of 2.33 provides ready-to-eat food based on whole oat flour, on account of improving the texture and providing sufficient β-glucan contents (0.806 g/100 g) without significantly affecting β-glucan viscosity.
Ainsyortm, P., İbanonlu, Ş., Plunkett, A., İbanonlu, E. & Stojceska, V. (2007): Effect of brewers spent grain addition and screw speed on the selected physical and nutritional properties of an extruded snack. J. Food Eng., 81, 702–709.
Andersson, A.A., Armö, E., Granueon, E., Fredriksson, H., Andersson, R. & Åman, P. (2004): Molecular weight and structure units of (1→3, 1→4)-β-glucans in dough and bread made from hull-less barley milling fractions. J. Cereal Sci., 40, 195–204.
Anttila, H., Sontau-Stromm, T. & Salovaara, H. (2004): Viscosity of beta-glucan in oat products. Agr. Food Sci., 13, 80–87.
Beer, M.U., Wood, P.J. & Weisz, J. (1997): Molecular weight distribution and (1→3)(1→4)-β-D-glucan content of consecutive extracts of various oat and barley cultivars. Cereal Chem., 74, 476–480.
EU (2011): The authorisation and refusal of authorisation of certain health claims made on foods and referring to the reduction of disease risk. Commission regulation, (EU) No 1160/2011.
FDA (1997): Final rule for food labelling: health claims: oat and coronary heart disease. Federal Regulations, 62, 3584–3681.
Izydorczyk, M.S. & MacGreuor, A.W. (2000): Evidence of intermolecular interactions of β-glucans and arabinoxylans. Carbohyd. Polym., 41, 417–420.
Jozinovis, A., Šubaris, D., Aškar, Đ., Babis, J. & Miliševis, B. (2016): Influence of spelt flour addition on properties of extruded products based on corn grits. J. Food Eng., 172, 31–37.
Li, C., Koyalski, R.J., Li, L. & Ganjyal, G.M. (2017): Extrusion expansion characteristics of samples of select varieties of whole yellow and green dry pea flours. Cereal Chem., 94, 385–391.
Li, Q., Liu, R., Wu, T., Wanu, M. & Zhang, M. (2016): Soluble dietary fiber fractions in wheat bran and their interactions with wheat gluten have impacts on dough properties. J. Agr. Food Chem., 64, 8735–8744.
Moisio, T., Forssell, P., Partanen, R., Damerau, A. & Hill, S.E. (2015): Reorganisation of starch, proteins and lipids in extrusion of oats. J. Cereal Sci., 64, 48–55.
Obucmoyski, W., Makoyska, A., Mildner-Szkudlarz, S., Szyenuiel, A., Majcmer, M. & Remiszeyski, M. (2015): Effect of triticale grain characteristics, scouring, and extrusion conditions on physico-chemical properties, antioxidant activity, and volatile compounds of flat bread. Acta Alimentaria, 44, 511–519.
Reuand, A., Cmoydmury, Z., Tosm, S.M., Wolever, T.M.S. & Wood, P. (2011): The molecular weight, solubility and viscosity of oat beta-glucan affect human glycemic response by modifying starch digestibility. Food Chem., 129, 297–304.
Setm, D. & Rajamanickam, G. (2012): Development of extruded snacks using soy, sorghum, millet and rice blend–a response surface methodology approach. Int. J. Food Sci. Tech., 47, 1526–1531.
Smarma, P., Gujral, H.S. & Sinum, B. (2012): Antioxidant activity of barley as affected by extrusion cooking. Food Chem., 131, 1406–1413.
Smarma, P. & Gujral, H.S. (2013): Extrusion of hulled barley affecting β-glucan and properties of extrudates. Food Bioprocess Tech., 6, 1374-1389.
Smarma, P. & Gujral, H.S. (2014): Anti-staling effects of β-glucan and barley flour in wheat flour chapatti. Food Chem., 145, 102–108.
Sibakov, J.K., Kirjoranta, J.S., Alam, A., Kokkonen, H., Jurvelin, J.S., & Sozer, N. (2015): Effect of oat bran fractions on extrudates made of defatted oats. Food Bioprocess Tech., 8, 445–458.
Šárka, E., Smršková, P., Kolášek, J., Sanlamtaş, M., Chenaaldao, D. & Pour, V. (2016): Extrusion of corn grits with native or modified starch addition-influence on starch digestibility fractions, shear stress-at-break, and expansion ratio. Acta Alimentaria, 45, 286–294.
Tosm, S.M., Brummer, Y. & Miller, S.S. (2010): Processing affects the physicochemical properties of β-glucan in oat bran cereal. J. Agr. Food Chem., 58, 7723–7730.
Wanu, Y.-Y. & Ryu, G.-H. (2013): Physical properties of extruded corn grits with corn fibre by CO 2 injection extrusion. J. Food Eng., 116, 14–20.
Wani, S. & Kumar, P. (2016): Effect of incorporation levels of oat and green pea flour on the properties of an extruded product and their optimisation. Acta Alimentaria, 45, 28–35.