Solid amorphous Zr-, Ti- and ZrxTi(1–x) phosphates (where x=0.10, 0.33, 0.66, and 0.90) in various sodium forms were contacted with an excess of solid oxalic acid dihydrate to its molten state for a given time. The oxalic acid was removed by extraction and the residue was washed with redistilled water. As a result of this, crystalline forms of Zr-, Ti-, and ZrxTi(1–x) phosphates were obtained. Using various sodium forms of the initial samples, higher rate of crystallisation resulted than that found in case of hydrogen forms of initial samples.