The sorption of strontium on synthetic hydroxyapatite was investigated using batch method and radiotracer technique. The hydroxyapatite
samples were prepared by a wet precipitation process followed by calcination of calcium phosphate that precipitated from aqueous
solution. Also, commercial hydroxyapatites were used. The sorption of strontium on hydroxyapatite depended on the method of
preparation and it was pH independent ranging from 4 to 9 as a result of buffering properties of hydroxyapatite. The distribution
coefficient Kd was significantly decreased with increasing concentration of Sr2+ and Ca2+ ions in solution with concentration above 1 × 10−3 mol dm−3. The percentage strontium sorption for commercial and by wet method prepared hydroxyapatite was in the range of 83–96%, while
calcined hydroxyapatite was ranging from 10 to 30%. The experimental data for sorption of strontium have been interpreted
in the term of Langmuir isotherm. The sorption of Sr2+ ions was performed by ion-exchange with Ca2+ cations on the crystal surface of hydroxyapatite. Although calcined hydroxyapatite is successfully used as biomaterial for
hard tissues repair, it is not used for the treatment of liquid wastes.