View More View Less
  • 1 Corvinus University of Budapest Department of Physics and Control Somloi ut 14-16 H-1118 Budapest Hungary
Restricted access

Purchase article

USD  $25.00

1 year subscription (Individual Only)

USD  $173.00

The acoustic response method is one of the most important dynamic methods used for assessment of the mechanical texture of different fruits and vegetables. The method is based on the mechanical excitation of the sample and the assessment of its resonant frequency. Different approaches are known for the interpretation of the vibration behavior of the samples having definite shapes. According to the most widely used interpretation, the stiffness of the sample ( s ) is dependent on the resonant frequency ( f ) and the mass ( m ) of the sample. The aim was to extend the acoustic response method to typically non-spherical samples (carrot, cucumber, etc.) to find a correct interpretation of the behavior of the sample and to introduce a stiffness coefficient suitable for characterization of the mechanical properties of a long shaped sample. According to Finite Element Modeling and experimental tests on carrot samples a close correlation was found between the resonant frequency and the effective length of the sample in a given shape range. A principally new stiffness coefficient was proposed for long shaped samples. It was found to be suitable for the characterization of the hardness of the vegetables in a wide size range.

  • Abbott, J. A., H. A. Affeldt and L. A. Liljedahl (1992): Firmness Measurement of Stored ‘Delicious’ Apples by Sensory Methods, Magness-Taylor, and Sonic Transmission. J. Amer. Soc. Hort. Sci. , 1174 590–595.

    Liljedahl L. A. , 'Firmness Measurement of Stored ‘Delicious’ Apples by Sensory Methods, Magness-Taylor, and Sonic Transmission ' (1992 ) 117 J. Amer. Soc. Hort. Sci. : 590 -595.

    • Search Google Scholar
  • Abbott, J. A., L. A. Liljedahl (1994) Relation of Sonic Resonant Frequency to Compression Tests and Magness-Taylor Firmness of Apples During Refrigerated Storage. Transactions of the ASAE , 37(4) 1211–1215.

    Liljedahl L. A. , 'Relation of Sonic Resonant Frequency to Compression Tests and Magness-Taylor Firmness of Apples During Refrigerated Storage ' (1994 ) 37 Transactions of the ASAE : 1211 -1215.

    • Search Google Scholar
  • Chen, H., J. De Baerdemaeker (1992) Effect of the Apples Shape on the Reliability of the Non-destructive Firmness Sensing. AgEng, Uppsala 1992 , Paper Number 9211 115.

  • Chen, H., J. De Baerdemaeker (1993) Finite-element-based Modal Analysis of Fruit Firmness, American Society of Agricultural Engineers , 36(6) 1827–1833.

    Baerdemaeker J. , 'Finite-element-based Modal Analysis of Fruit Firmness ' (1993 ) 36 American Society of Agricultural Engineers : 1827 -1833.

    • Search Google Scholar
  • Chen, H., J. De Baerdemaeker (1993a): Effect of Apple Shape on Acoustic Measurements of Firmness. J. Agric. Engng Res. 1993 , 56 253–266.

    Baerdemaeker J. , 'Effect of Apple Shape on Acoustic Measurements of Firmness ' (1993 ) 56 J. Agric. Engng Res. 1993 : 253 -266.

    • Search Google Scholar
  • Cherng, An-Pan, Feng Ouyang (2003) A Firmness Index for Fruits of Ellipsoidal Shape. Biosystems Engineering , 86(1), 35–44.

    Ouyang F. , 'A Firmness Index for Fruits of Ellipsoidal Shape ' (2003 ) 86 Biosystems Engineering : 35 -44.

    • Search Google Scholar
  • Cherng, An-Pan, Feng Ouyang, Lilian Blot, Reyer Zwiggelaar (2005) An Estimation of Firmness for Solid Ellipsoidal Fruit. Biosystems Engineering , 92(2), 257–259.

    Zwiggelaar R. , 'An Estimation of Firmness for Solid Ellipsoidal Fruit ' (2005 ) 92 Biosystems Engineering : 257 -259.

    • Search Google Scholar
  • De Belie, N., S. Schotte, J. Lammertyn, B. Nicolai, J. De Baerdemaeker (2000a) Firmness changes of pear fruit on the tree with the acoustic impulse response technique. AgEng, Warwick 2000 , Paper Number 00-PH-001.

  • De Belie, N., S. Schotte, P. Coucke, J. De Baerdemaeker (2000) Development of an automated monitoring device to quantify changes in firmness of apples during storage. Postharvest Biology and Technology , 18 (2006b) 1–8.

    Baerdemaeker J. , 'Development of an automated monitoring device to quantify changes in firmness of apples during storage ' (2000 ) 18 Postharvest Biology and Technology : 1 -8.

    • Search Google Scholar
  • De Ketelaere, B., M. Ruiz-Altisent, E. C. Correa, J. De Baerdemaeker, P. Barreiro (2001) Reliability of vibration measurements and impact response characteristics for the quality assessment of tomatoes. Fruit, Nut, and Vegetable Production Engineering , 487–492.

  • Dewulf, W., P. Jancsók, B. Nicolai, G. De Roeck, D. Briassoulis (1999): Determining the Firmness of a Pear using Finite Element Modal Analysis. J. Agric. Engng Res. 1999, 74 217–224.

    Briassoulis D. , 'Determining the Firmness of a Pear using Finite Element Modal Analysis ' (1999 ) 74 J. Agric. Engng Res. : 217 -224.

    • Search Google Scholar
  • Fekete, A., J. Felföldi (2002) Test methods for the assessment of tomato ripening. Hungarian Agricultrual Engineering , 15/2002 39–40.

    Felföldi J. , 'Test methods for the assessment of tomato ripening ' (2002 ) 15 Hungarian Agricultrual Engineering : 39 -40.

    • Search Google Scholar
  • Felföldi, J. and A. Fekete (2003) Detection of small scale mechanical changes by acoustic measuring system. ASAE Annual Meeting Paper , Las Vegas, No. 036097, 1–8.

  • Jancsók, P. T., L. Clijmans, B. M. Nicolai and J. De Baerdemaeker (2001a) Investigation of the effect of shape on the acoustic response of ‘conference’ pears by finite element modeling. Postharvest Biology and Technology 23 (2001) 1–12.

    Baerdemaeker J. , 'Investigation of the effect of shape on the acoustic response of ‘conference’ pears by finite element modeling ' (2001 ) 23 Postharvest Biology and Technology : 1 -12.

    • Search Google Scholar
  • Jancsók, P., J. Lammertyn, B. M. Nicolai, J. De Baerdemaeker (2001) Internal defect detection of pears by impulse response method. Fruit, Nut, and Vegetable Production Engineering , 469–474.

  • Lakner, Z. (1996) Economic transition and new features of vertical relations in the Hungarian food chain; Acta Agronomica Hungarica ; 44(3); 301–319.

    Lakner Z. , 'Economic transition and new features of vertical relations in the Hungarian food chain ' (1996 ) 44 Acta Agronomica Hungarica : 301 -319.

    • Search Google Scholar
  • Landahl, S., J. De Baerdemaeker (2001): Dependence of stiffness measured with the acoustic impulse response technique on state of development of apples. Fruit, Nut, and Vegetable Production Engineering , 475–480.

  • Ponomarjov, Sz. D. (1966) Szilárdsági számítások a gépészetben 6. Rezgések és ütések. (Calculations for Mechanical Engineering 6. Vibrations and Impacts), Műszaki Kiadó, Budapest, 420.

    Ponomarjov Sz. D. , '', in Szilárdsági számítások a gépészetben 6. Rezgések és ütések , (1966 ) -.

  • Shmulevich, I., N. Gali, M.S. Howarth (2003): Nondestructive dynamic testing of apples for firmness evaluation. Postharvest Biology and Technology , 23 (2003) 287–299.

    Howarth M.S. , 'Nondestructive dynamic testing of apples for firmness evaluation ' (2003 ) 23 Postharvest Biology and Technology : 287 -299.

    • Search Google Scholar
  • Sitkei, Gy. (1986) Mechanics of Agricultural Materials. Elsevier, Amsterdam, 487.

    Sitkei Gy. , '', in Mechanics of Agricultural Materials , (1986 ) -.

  • Zsom-Muha, V., T. Zsom, J. Felföldi (2007) In-vivo measurement of tomato firmness. GreenSys 2007 , Book of Abstract October 4–6, Naples, 313–314.

 

 

The author instruction is available in PDF.
Please, download the file from HERE.

 

 

Senior editors

Editor(s)-in-Chief: Felföldi, József

Chair of the Editorial Board Szendrő, Péter

Editorial Board

  • Beke, János (Szent István University, Faculty of Mechanical Engineerin, Gödöllő – Hungary)
  • Fenyvesi, László (Szent István University, Faculty of Mechanical Engineering, Gödöllő – Hungary)
  • Szendrő, Péter (Szent István University, Faculty of Mechanical Engineering, Gödöllő – Hungary)
  • Felföldi, József (Szent István University, Faculty of Food Science, Budapest – Hungary)

 

Advisory Board

  • De Baerdemaeker, Josse (KU Leuven, Faculty of Bioscience Engineering, Leuven - Belgium)
  • Funk, David B. (United States Department of Agriculture | USDA • Grain Inspection, Packers and Stockyards Administration (GIPSA), Kansas City – USA
  • Geyer, Martin (Leibniz Institute for Agricultural Engineering and Bioeconomy (ATB), Department of Horticultural Engineering, Potsdam - Germany)
  • Janik, József (Szent István University, Faculty of Mechanical Engineering, Gödöllő – Hungary)
  • Kutzbach, Heinz D. (Institut für Agrartechnik, Fg. Grundlagen der Agrartechnik, Universität Hohenheim – Germany)
  • Mizrach, Amos (Institute of Agricultural Engineering. ARO, the Volcani Center, Bet Dagan – Israel)
  • Neményi, Miklós (Széchenyi University, Department of Biosystems and Food Engineering, Győr – Hungary)
  • Schulze-Lammers, Peter (University of Bonn, Institute of Agricultural Engineering (ILT), Bonn – Germany)
  • Sitkei, György (University of Sopron, Institute of Wood Engineering, Sopron – Hungary)
  • Sun, Da-Wen (University College Dublin, School of Biosystems and Food Engineering, Agriculture and Food Science, Dublin – Ireland)
  • Tóth, László (Szent István University, Faculty of Mechanical Engineering, Gödöllő – Hungary)

Prof. Felföldi, József
Institute: Physics-Control Department, Szent István University
Address: 1118 Budapest Somlói út 14-16
Phone: +36 1 305 7206
E-mail: Felfoldi.Jozsef@etk.szie.hu

Indexing and Abstracting Services:

  • CABI

2019  
Scimago
H-index
6
Scimago
Journal Rank
0,123
Scimago
Quartile Score
Environmental Engineering Q4
Industrial and Manufacturing Engineering Q4
Mechanical Engineering Q4
Scopus
Cite Score
18/33=0,5
Scopus
Cite Score Rank
Environmental Engineering 108/132 (Q4)
Industrial and Manufacturing Engineering 242/340 (Q3)
Mechanical Engineering 481/585 (Q4)
Scopus
SNIP
0,211
Scopus
Cites
13
Scopus
Documents
5

 

Progress in Agricultural Engineering Sciences
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription Information Online subsscription: 145 EUR / 181 USD
Print + online subscription: 168 EUR / 210 USD
Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

Progress in Agricultural Engineering Sciences
Language English
Size B5
Year of
Foundation
2004
Publication
Programme
2021 Volume 17
Volumes
per Year
1
Issues
per Year
1
Founder Magyar Tudományos Akadémia
Founder's
Address
H-1051 Budapest, Hungary, Széchenyi István tér 9.
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 1786-335X (Print)
ISSN 1787-0321 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Jan 2021 11 0 0
Feb 2021 4 1 2
Mar 2021 6 0 0
Apr 2021 4 0 0
May 2021 5 0 0
Jun 2021 6 0 0
Jul 2021 0 0 0