View More View Less
  • 1,2 National Institute of Technology, Srinagar, India
Restricted access

Purchase article

USD  $25.00

Purchase this article

USD  $387.00

Abstract

The possibility of using mineral admixtures as a replacement for cement may reduce the carbon dioxide emission, which causes global warming and climatic changes on the environment. The objective of this study is to investigate the properties of early strength concrete produced with a constant replacement of alccofine (i.e. 25% by mass) and a new generation of chemical admixture that is Polycarboxylate ether. The constant dosage of alccofine and different proportions of polycarboxylate ethers are mixed in concrete and tested for workability and mechanical properties of concrete. Response surface method was applied to predict, validate and optimize the experimental data using regression equation. The results show that the performance of concrete improves with the addition of alccofine and Polycarboxylate ether into concrete.

  • [1]

    Jindal B. B. , Singhal, D., Sharma, S. K., Ashish, D. K., Parveen, Improving compressive strength of low calcium fly ash geopolymer concrete with alccofine, Advances in Concrete Construction, Vol. 5, No. 1, 2017, pp. 1729.

    • Search Google Scholar
    • Export Citation
  • [2]

    Ondova M. , Stevulova, N., Palascakova, L., Estokova A. The study of concrete properties prepared with a proportion of fly ash, Pollack Periodica, Vol. 9, Supplement 1, 2014, pp. 105115.

    • Search Google Scholar
    • Export Citation
  • [3]

    Saxena S. K. , Kumar, M., Singh N. B. Effect of alccofine powder on the properties of pond fly ash based geopolymer mortar under different conditions, Environmental Technology and Innovation, Vol. 9, 2018, pp. 232242.

    • Search Google Scholar
    • Export Citation
  • [4]

    Richardson A. Strength development of plain concrete compared to concrete with a non-chloride accelerating admixture, Structural Survey, Vol. 25, No. 5, 2007, pp. 418423.

    • Search Google Scholar
    • Export Citation
  • [5]

    Bhavikatti M. A. , Karjinni V. Combined effect of hardening accelerator and method of curing in the strength development of pavement concrete, International Journal of Civil and Structural Engineering, Vol. 2, No. 4, 2012, pp. 10601069.

    • Search Google Scholar
    • Export Citation
  • [6]

    Jindal B. B. , Singhal, D., Sharma, S. K., Parveen, Suitability of ambient cured alccofine added low-calcium fly ash-based geopolymer concrete, Indian Journal of Science and Technology, Vol. 10, No. 12, 2017, pages 110.

    • Search Google Scholar
    • Export Citation
  • [7]

    Kavitha S. , Kala T. F. Effect of bamboo fiber in self-compacting concrete partially replacement cement with GGBS and alccofine, International Journal of Civil Engineering and Technology, Vol. 8, No. 3, 2017, pp. 158166.

    • Search Google Scholar
    • Export Citation
  • [8]

    Reddy M. V. S. , Ashalatha, K., Surendra K. Studies on eco-friendly concrete by partial replacement of cement with alccofine and fine fly ash, ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 5, 2016, pp. 34453448.

    • Search Google Scholar
    • Export Citation
  • [9]

    Sharma D. , Sharma, S., Goyal A. Utilization of waste foundry slag and alccofine for developing high strength concrete, International Journal of Electrochemical Science, Vol. 11, No. 1, 2016, pp. 31903205.

    • Search Google Scholar
    • Export Citation
  • [10]

    V. Umamaheswaran , C. Sudha, P. T. Ravichandran and P. R. Kannan Rajkumar, Use of M sand in high strength and high performance concrete, Indian Journal of Science and Technology, Vol. 8, No. 28, 2015, pages 18.

    • Search Google Scholar
    • Export Citation
  • [11]

    Saurav, Gupta A. K. Experimental study of strength relationship of concrete cube and concrete cylinder using ultrafine slag alccofine, International Journal of Scientific & Engineering Research, Vol. 5, No. 5, 2014, pp. 102107.

    • Search Google Scholar
    • Export Citation
  • [12]

    Gupta S. , Sharma, S., Sharma D. A review on alccofine a supplementary cementitous material, International Journal of Modern Trends in Engineering and Research, Vol. 3, No. 2, 2013, pp. 148153.

    • Search Google Scholar
    • Export Citation
  • [13]

    Pawar M. S. , Saoji A. C. Effect of alccofine on self-compacting concrete, International Journal of Engineering and Science, Vol. 2, No. 6, 2013, pp. 59.

    • Search Google Scholar
    • Export Citation
  • [14]

    IS 10262, Guidelines for concrete mix design proportioning, Bureau of Indian Standards, 2009.

  • [15]

    El Mir A. , Nehme S. G. Effect of air entraining admixture on the properties of self-compacting concrete incorporating supplementary cementations materials, Pollack Periodica, Vol. 12, Supplement 3, 2017, pp. 8595.

    • Search Google Scholar
    • Export Citation
  • [16]

    IS 1199 (1959), Methods of sampling and analysis of concrete, Bureau of Indian Standards, 1959.

  • [17]

    IS 516 (1959), Method of tests for strength of concrete, Bureau of Indian Standards, 1959.

  • [18]

    IS 5816 (1999), Method of test splitting tensile strength of concrete, Bureau of Indian Standards, 1999.

  • [19]

    Mohan A. , Mini K. M. Strength and durability studies of SCC incorporating silica fume and ultra fine GGBS, Construction and Building Materials, Vol. 171, 2018, pp. 919928.

    • Search Google Scholar
    • Export Citation
  • [20]

    Reddy P. N. , Naqash J. A. Durability and mechanical properties of concrete modified with ultra-fine slag, International Journal of Innovative Technology and Exploring Engineering, Vol. 8, No. 5, 2019, pp. 230234.

    • Search Google Scholar
    • Export Citation
  • [21]

    Reddy P. N. , Naqash J. A. Strength prediction of high early strength concrete by artificial intelligence, International Journal of Engineering and Advanced Technology, Vol. 8, No. 3, 2019, pp. 330334

    • Search Google Scholar
    • Export Citation
  • [22]

    Kavyateja B. V. , Jawahar J. G., Sashidhar C. Investigation on ternary blended self compacting concrete using fly ash and alccofine, International Journal of Recent Technology and Engineering, Vol. 7, No. 5S2, 2019, pp. 447451.

    • Search Google Scholar
    • Export Citation
  • [23]

    Vu-Bac N. , Rafiee, R., Zhuang, X., Lahmer, T., Rabczuk T. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters, Composites Part B: Engineering, Vol. 68, 2015, pp. 446164.

    • Search Google Scholar
    • Export Citation
  • [24]

    Vu-Bac N. , Silani, M., Lahmer, T., Zhuang, X., Rabczuk T. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites, Computational Material Science, Vol. 96, Part B, 2015 pp. 520535.

    • Search Google Scholar
    • Export Citation
  • [25]

    Hasan M. M. , Kabir A. Prediction of compressive strength of concrete from early age test result, 4th Annual Paper Meet and 1st Civil Engineering Congress, Dhaka, Bangladesh, 22-24 December 2011, pp. 978984.

    • Search Google Scholar
    • Export Citation
  • [26]

    Jindal B. B. , Singhal, D., Sharma, S. K., Parveen. Prediction of mechanical properties of alccofine activated low calcium fly ash based geopolymer concrete, ARPN Journal of Engineering and Applied Sciences, Vol. 12, No. 9, 2017, pp. 30223031.

    • Search Google Scholar
    • Export Citation
  • [27]

    Jindal B. B. , Parveen, Singhal D., Goyal A. Predicting relationship between mechanical properties of low calcium fly ash-based geopolymer concrete, Transactions of the Indian Ceramic Society, Vol. 76, No. 4, 2018, pp. 258265.

    • Search Google Scholar
    • Export Citation
  • [28]

    Sharma D. , Sharma, S., Goyal A. Utilization of waste foundry slag and alccofine for developing high strength concrete, International Journal of Electrochemical Science, Vol. 11, 2016, pp. 31903205.

    • Search Google Scholar
    • Export Citation

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Jun 2020 0 10 5
Jul 2020 39 2 0
Aug 2020 44 0 0
Sep 2020 37 10 20
Oct 2020 51 10 20
Nov 2020 38 11 18
Dec 2020 6 2 4