Pollack Periodica
Volume/Issue:
Volume 18: Issue 1
Research of the round convective air jet of the exhaust local ventilation
Authors:
Orest Voznyak Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Orest Voznyak in
Current site
Google Scholar
PubMed Close
,
Nadiia Spodyniuk Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Nadiia Spodyniuk in
Current site
Google Scholar
PubMed Close
https://orcid.org/0000-0002-2865-9320
,
Oleksandr Dovbush Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Oleksandr Dovbush in
Current site
Google Scholar
PubMed Close
,
Olena Savchenko Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Olena Savchenko in
Current site
Google Scholar
PubMed Close
,
Iryna Sukholova Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Iryna Sukholova in
Current site
Google Scholar
PubMed Close
,
Mariana Kasynets Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Mariana Kasynets in
Current site
Google Scholar
PubMed Close
, and
Iryna Kirakevych Department of Building Production, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Iryna Kirakevych in
Current site
Google Scholar
PubMed Close
Pages:
60–65
Online Publication Date:
26 Dec 2022
Publication Date:
07 Mar 2023
Article Category:
Research Article
DOI:
https://doi.org/10.1556/606.2022.00691
Keywords:
exhaust ventilation; local ventilation; convective jet; round jet; exhaust outlet
Restricted access

Abstract

The article is devoted to research of properties of the round convective air jet. The aim of this work is to establish universal graphical dependencies and empirical formulas for describing velocity and temperature fields over the entire range of development of round convective exhaust ventilation jet; development of an algorithm for solving the transcendent problem of determining the surface temperature of a heat source; introduction of velocity and temperature attenuation coefficients for round convective jet; visualization of its characteristics in the form of a 3D image; achieving reduction of metal consumption of the local exhaust ventilation system due to the overall optimization of the velocity and temperature fields of the round convective air jet.

  • [1]

    O. Voznyak, N. Spodyniuk, I. Sukholova, O. Dovbush, M. Kasynets, and O. Datsko, “Diagnosis of damage to the ventilation system,” Diagnostyka, vol. 22, no. 3, pp. 91–99, 2021.

    • Search Google Scholar
    • Export Citation
  • [2]

    O. Voznyak, N. Spodyniuk, I. Sukholova, O. Savchenko, M. Kasynets, and O. Datsko, “Diagnosis of three types damages to the ventilation system,” Diagnostyka , vol. 23, no. 1, 2022, Paper no. 2022102.

    • Search Google Scholar
    • Export Citation
  • [3]

    V. Petrenko, K. Dykarev, D. Volchok, and O. Kuzmenko, “Evaluation of indoor temperature for various building envelopes damaged,” E3S Web of Conferences , vol. 32, 2018, Paper no. 01019.

    • Search Google Scholar
    • Export Citation
  • [4]

    V. Petrenko, K. Dikarev, A. Petrenko, and R. Papirnyk, “The calculation of indoor air forecast temperature of a space with the replaceable thermotechnical characteristics of the enclosure structures while in operation,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16‒18, 2020, vol. 100, Z. Blikharskyy, Ed., Lecture Notes in Civil Engineering, 2021, pp. 319–327.

    • Search Google Scholar
    • Export Citation
  • [5]

    P. Kapalo, H. Klymenko, V. Zhelykh, and M. Adamski, “Investigation of indoor air quality in the selected Ukraine classroom - Case study,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11‒13, 2019, vol. 47, Z. Blikharskyy, P. Koszelnik, and P. Mesaros, Eds, Lecture Notes in Civil Engineering, 2020, pp. 168–173.

    • Search Google Scholar
    • Export Citation
  • [6]

    P. Kapalo, M. Sulewska, and M. Adamski, “Examining the interdependence of the various parameters of indoor air,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16‒18, 2020, vol. 100, Z. Blikharskyy, Ed., Lecture Notes in Civil Engineering, 2021, pp. 150–157.

    • Search Google Scholar
    • Export Citation
  • [7]

    P. Kapalo, S. Vilčeková, L. Mečiarová, F. Domnita, and M. Adamski, “Influence of indoor climate on employees in office buildings - A case study,” Sustainability, vol. 12, no. 14, 2020, Paper no. 5569.

    • Search Google Scholar
    • Export Citation
  • [8]

    О. Voznyak, N. Spodyniuk, O. Savchenko, O. Dovbush, M. Kasynets, and O. Datsko, “Analysis of premise infrared heating and ventilation with an exhaust outlet and flat decking air flow,” Diagnostyka , vol. 23, no. 2, 2022, Paper no. 2022207.

    • Search Google Scholar
    • Export Citation
  • [9]

    Z. Poorova and Z. Vranayova, “Humidity, air temperature, CO2 and well-being of people with and without green wall,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16‒18, 2020, vol. 100, Z. Blikharskyy, Ed., Lecture Notes in Civil Engineering, 2021, pp. 336–346.

    • Search Google Scholar
    • Export Citation
  • [10]

    F. Vranay and Z. Vranayova, “Influence of heat source choice on building energy certification process and CO2 emissions,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11‒13, 2019, vol. 47, Z. Blikharskyy, P. Koszelnik, and P. Mesaros, Eds, Lecture Notes in Civil Engineering, 2020, pp. 541–548.

    • Search Google Scholar
    • Export Citation
  • [11]

    O. Voznyak, K. Myroniuk, I. Sukholova, and P. Kapalo, “The impact of air flows on the environment,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11‒13, 2019, vol. 47, Z. Blikharskyy, P. Koszelnik, and P. Mesaros, Eds, Lecture Notes in Civil Engineering, 2020, pp. 534–540.

    • Search Google Scholar
    • Export Citation
  • [12]

    O. Gumen, N. Spodyniuk, M. Ulewicz, and Y. Martyn, “Research of thermal processes in industrial premises with energy-saving technologies of heating,” Diagnostyka, vol. 18, no. 2, pp. 43–49, 2017.

    • Search Google Scholar
    • Export Citation
  • [13]

    B. Basok, B. Davydenko, G. Farenuyk, and S. Goncharuk, “Computational modeling of the temperature regime in a room with a two-panel radiator,” J. Eng. Phys. Thermophys. , vol. 87, no. 6, pp. 1433–1437, 2014.

    • Search Google Scholar
    • Export Citation
  • [14]

    R. Khmil, R. Tytarenko, Y. Blikharskyy, and P. Vegera, “The probabilistic calculation model of RC beams, strengthened by RC jacket,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16‒18, 2020, vol. 100, Z. Blikharskyy, Ed., Lecture Notes in Civil Engineering, 2021, pp. 182–191.

    • Search Google Scholar
    • Export Citation
  • [15]

    Z. Blikharskyy, N. Shnal, and R. Khmil, “The influence of the damaged reinforcing bars on the stress-strain state of the rein-forced concrete beams,” Prod. Eng. Arch., vol. 14, no. 14, pp. 23–26, 2017.

    • Search Google Scholar
    • Export Citation
  • [16]

    U. Marushchak, M. Sanytsky, O. Pozniak, and O. Mazurak, “Peculiarities of nanomodified portland systems structure formation,” Chem. Chem. Technol. , vol. 13, no. 4, pp. 510–517, 2019.

    • Search Google Scholar
    • Export Citation
  • [17]

    P. Novosad, O. Pozniak, V. Melnyk, and S. Braichenko “Porous thermal insulation materials on organic and mineral fillers,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, vol. 47, Z. Blikharskyy, P. Koszelnik, and P. Mesaros, Eds, Lecture Notes in Civil Engineering, 2020, pp. 354–360.

    • Search Google Scholar
    • Export Citation
  • [18]

    K. Myroniuk, O. Voznyak, Yu. Yurkevych, and B. Gulay, “Technical and economic efficiency after the boiler room renewal,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16–18, 2020, vol. 100, Z. Blikharskyy, Ed., Lecture Notes in Civil Engineering, 2021, pp. 311–318.

    • Search Google Scholar
    • Export Citation
  • [19]

    O. Voznyak, N. Spodyniuk, O. Savchenko, I. Sukholova, and M. Kasynets, “Еnhancing of energetic and economic efficiency of coal mines heating by infrared heaters,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu , vol. 2, no. 182, pp. 104–109, 2021.

    • Search Google Scholar
    • Export Citation
  • [20]

    N. Spodyniuk, V. Zhelykh, and O. Dzeryn, “Combined heating systems of premises for breeding of young pigs and poultry,” FME Trans. , vol. 46, pp. 651–657, 2018.

    • Search Google Scholar
    • Export Citation
  • [21]

    О. Voznyak, O. Savchenko, N. Spodyniuk, I. Sukholova, M. Kasynets, and O. Dovbush, “Improving of ventilation efficiency at air distribution by the swirled air jets,” Pollack Periodica, vol. 17, no. 1, pp. 123–127, 2022.

    • Search Google Scholar
    • Export Citation
  • [22]

    V. Zhelykh, O. Voznyak, Yu. Yurkevych, I. Sukholova, and O. Dovbush, “Enhancing of energetic and economic efficiency of air distribution by swirled-compact air jets”, Prod. Eng. Arch. , vol. 27, no. 3, pp. 171–175, 2021.

    • Search Google Scholar
    • Export Citation
  • [23]

    N. Spodyniuk, O. Voznyak, O. Savchenko, O. Dovbush, M. Kasynets, and O. Datsko, “Analysis of premise infrared heating and ventilation with an exhaust outlet and flat decking air flow,” Diagnostyka , vol. 23, no. 2, 2022, Paper no. 2022107.

    • Search Google Scholar
    • Export Citation
  • [24]

    M. Adamski, “MathModelica in modeling of countercurrent heat exchangers,” in Proceedings, 8th EUROSIM Congress on Modeling and Simulation, Cardiff, UK, Sept. 10–13, 2013, pp. 439–442.

    • Search Google Scholar
    • Export Citation
  • [25]

    O. Voznyak, N. Spodyniuk, Yu. Yurkevych, I. Sukholova, and O. Dovbush, “Enhancing efficiency of air distribution by swirled-compact air jets in the mine using the heat utilizators,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 5, no. 179, pp. 89–94, 2020.

    • Search Google Scholar
    • Export Citation
  • [26]

    O. Savchenko, O. Voznyak, K. Myroniuk, and O. Dovbush, “Thermal renewal of industrial buildings gas supply system,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16–18, 2020, vol. 100, Z. Blikharskyy, Ed., Lecture Notes in Civil Engineering, 2021, pp. 385–392.

    • Search Google Scholar
    • Export Citation
  • [27]

    O. Savchenko, V. Zhelykh, Y. Yurkevych, S. Shapoval, and K. Kozak, “Using vortex tube for decreasing losses of natural gas in engineering systems of gas supply,” Pollack Periodica, vol. 13, no. 3, pp. 241–250, 2018.

    • Search Google Scholar
    • Export Citation
  • [28]

    S. Shapoval, P. Shapoval, V. Zhelykh, O. Pona, N. Spodyniuk, B. Gulai, O. Savchenko, and K. Myroniuk, “Ecological and energy aspects of using the combined solar collectors for low-energy houses”, Chem. Chem. Technol., vol. 11, no. 4. pp. 503–508, 2017.

    • Search Google Scholar
    • Export Citation
  • [29]

    S. Shapoval, V. Zhelykh, N. Spodyniuk, O. Dzeryn, and B. Gulai, “The effectiveness to use the distribution manifold in the construction of the solar wall for the conditions of circulation,” Pollack Periodica , vol. 14, no. 2, pp. 143–154, 2019.

    • Search Google Scholar
    • Export Citation
  • [30]

    I. Tymchuk, M. Malovanyy, O. Shkvirko, V. Zhuk, A. Masikevych, and S. Synelnikov, “Innovative creation technologies for the growth substrate based on the man-made waste - Perspective way for Ukraine to ensure biological reclamation of waste dumps and quarries,” Int. J. Foresight Innovation Pol. , vol. 14, nos 2–4, pp. 248–263, 2020.

    • Search Google Scholar
    • Export Citation
  • [31]

    L. Bytčanková, J. Rumann, and P. Dušička, “Distribution of flow velocity in a shaft intake structure,” Pollack Periodica , vol. 17, no. 1, pp. 83–87, 2022.

    • Search Google Scholar
    • Export Citation
  • [32]

    R. Hnativ and O. Verbovskiy, “Distribution of local velocities in a circular pipe with accelerating fluid flow”, Eastern-European J. Enterprise Tech. , vol. 2, no. 7–98, pp. 58–63, 2019.

    • Search Google Scholar
    • Export Citation
  • [33]

    O. Voznyak, Y. Yurkevych, O. Dovbush, and Y. Serediuk, “The influence of chairs and passengers on air velocity in bus passenger compartment,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, vol. 47, Z. Blikharskyy, P. Koszelnik, and P. Mesaros, Eds, Lecture Notes in Civil Engineering, 2020, pp. 518–525.

    • Search Google Scholar
    • Export Citation
  • [34]

    J. Vlachopoulos and J. F. Tomich, “Heat transfer from a turbulent hot air jet impinging normally on a flat plate,” Can. J. Chem. Eng. , vol. 49, no. 4, pp. 462–466, 1971.

    • Search Google Scholar
    • Export Citation
  • [35]

    N. Tovondrainya, S. Abideb, B. Zeghmatib, C. Raminosoaa, and M. A. Randriazanamparany, “Numerical study of heat transfer and flow characteristics of air jet in a semi-confined cavity,” Energy Proced. , vol. 139, pp. 682–688, 2017.

    • Search Google Scholar
    • Export Citation
  • [36]

    A. Klymchuk, V. Lozhechnikov, V. Mykhailenko, and N. Lozhechnikova, “Improved mathematical model of fluid level dynamics in a drum-type steam generator as a controlled object,” J. Automation Inf. Sci. , vol. 51, no. 5, pp. 65–74, 2019.

    • Search Google Scholar
    • Export Citation
  • [37]

    V. Labay, O. Savchenko, V. Zhelykh, and K. Kozak, “Mathematical modeling of the heating process in a vortex tube at the gas distribution stations,” Math. Model. Comput. , vol. 6, no. 2, pp. 311–319, 2019.

    • Search Google Scholar
    • Export Citation
  • [38]

    S. Kubacki and E. Dick, “Convective heat transfer prediction for an axisymmetric jet impinging onto a flat plate with an improved k–ω model,” Int. J. Numer. Methods Heat Fluid Flow, vol. 19, pp. 960–981, 2009.

    • Search Google Scholar
    • Export Citation
  • [39]

    A. Yefimov and T. Potanina, “Application of interval analysis for improving reliability of estimation of hardness value spread for nuclear structural materials,” Probl. At. Sci. Technologythis, vol. 125, no. 1, pp. 206–210, 2020.

    • Search Google Scholar
    • Export Citation
  • [40]

    K. Dikarev, O. Kuzmenko, V. Petrenko, P. Sankov, L. Kyslytsia, and N. Ibadov, “Experimental study of operating indicators of a thermalactic covering panel,” Sci. Innovation, vol. 16, no. 2, pp. 57–65, 2020.

    • Search Google Scholar
    • Export Citation
  • Collapse
  • Expand
Cover Pollack Periodica
Pollack Periodica
Print ISSN:
1788-1994
Online ISSN:
1788-3911

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Petra Bujňáková (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS
  • CABELLS Journalytics

 

2023  
Scopus  
CiteScore 1.5
CiteScore rank Q3 (Civil and Structural Engineering)
SNIP 0.849
Scimago  
SJR index 0.288
SJR Q rank Q3

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription fee 2025 Online subsscription: 381 EUR / 420 USD
Print + online subscription: 456 EUR / 520 USD
Subscription Information Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

2023  
Scopus  
CiteScore 1.5
CiteScore rank Q3 (Civil and Structural Engineering)
SNIP 0.849
Scimago  
SJR index 0.288
SJR Q rank Q3

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Apr 2024 7 0 0
May 2024 12 0 0
Jun 2024 14 0 0
Jul 2024 16 0 0
Aug 2024 29 0 0
Sep 2024 12 0 0
Oct 2024 2 0 0