Authors:
Ievgen Antypov Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Ievgen Antypov in
Current site
Google Scholar
PubMed
Close
,
Nadiia Spodyniuk Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Nadiia Spodyniuk in
Current site
Google Scholar
PubMed
Close
,
Orest Voznyak Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Orest Voznyak in
Current site
Google Scholar
PubMed
Close
,
Iryna Sukholova Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Iryna Sukholova in
Current site
Google Scholar
PubMed
Close
https://orcid.org/0000-0002-3319-2278
, and
Svetlana Tarasenko Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Svetlana Tarasenko in
Current site
Google Scholar
PubMed
Close
Restricted access

Abstract

An assessment of the moisture regime of the external enclosing structures of the building with a layer of insulation on the outer and inner sides was carried out, considering the thermophysical characteristics of all materials of the outer wall of the building. It is shown that brickwork without insulation to preserve the estimated term of its optimal operation, requires taking measures to bring its thermal resistance to heat transfer to a standardized value or to arrange more intensive air exchange in the premises of the building. It has been proven that when designing residential and public buildings, the results of assessing the moisture regime of external enclosing structures and the building's energy indicators for compliance with current requirements are a very important criterion.

  • [1]

    V. Nalyvaiko, I. Radko, A. Zhyltsov, O. Okushko, A. Mishchenko, and I. Antypov, “Investigation of termomodernized building's microclimate with renewable energy,” E3S Web Conf., vol. 154, 2020, Paper no. 07011.

    • Search Google Scholar
    • Export Citation
  • [2]

    P. Kapalo, H. Klymenko, V. Zhelykh, and M. Adamski, “Investigation of indoor air quality in the selected Ukraine classroom - Case study,” in Proceedings of CEE 2019, Lecture Notes in Civil Engineering, vol. 47, 2020, pp. 168173.

    • Search Google Scholar
    • Export Citation
  • [3]

    A. Lis, “The research on microclimate and thermal comfort in nursery school buildings,” Arch. Civil Eng., vol. 48, no. 3, pp. 349371, 2002.

    • Search Google Scholar
    • Export Citation
  • [4]

    A. Lis and N. Spodyniuk, “The quality of the microclimate in educational buildings subjected to thermal modernization,” E3S Web Conf., vol. 100, 2019, Paper no. 00048.

    • Search Google Scholar
    • Export Citation
  • [5]

    A. Lis and A. Ujma, “Changes in the external environment and of interior microclimate as a consequence of energetic modernization of building,” Adv. Mater. Res., vol. 1020, pp. 585590, 2014.

    • Search Google Scholar
    • Export Citation
  • [6]

    I. Redko, A. Ujma, A. Redko, S. Pavlovskiy, O. Redko, and Y. Burda, “Energy efficiency of buildings in the cities of Ukraine under the conditions of sustainable development of centralized heat supply systems,” Energy Build., vol. 247, 2021, Paper no. 110947.

    • Search Google Scholar
    • Export Citation
  • [7]

    K. Myroniuk, O. Voznyak, Yu. Yurkevych, and B. Gulay, “Technical and economic efficiency after the boiler room renewal,” in Proceedings of EcoComfort 2020, Lecture Notes in Civil Engineering, vol. 100, 2021, pp. 311318.

    • Search Google Scholar
    • Export Citation
  • [8]

    O. Savchenko, O. Voznyak, K. Myroniuk, and O. Dovbush, “Thermal renewal of industrial buildings gas supply system,” in Proceedings of EcoComfort 2020, Lecture Notes in Civil Engineering, vol. 100, 2020, pp. 385392.

    • Search Google Scholar
    • Export Citation
  • [9]

    E. Dudkiewicz, N. Fidorów, and J. Jezowiecki, “Energy consumption analysis for radiant heating systems,” Rocznik Ochrona Srodowiska, vol. 15, no. 1, pp. 22932308, 2013.

    • Search Google Scholar
    • Export Citation
  • [10]

    N. Fidorów-Kaprawy and E. Dudkiewicz, “The impact of the hot tap water load pattern in the industrial hall on the energy yield from solar collectors”, E3S Web Conf., vol. 22, 2017, Paper no. 00044.

    • Search Google Scholar
    • Export Citation
  • [11]

    N. Spodyniuk, O. Voznyak, O. Savchenko, I. Sukholova, and M. Kasynets, “Optimization of heating efficiency of buildings above underground coal mines by infrared heaters,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 3, no. 189, рp. 100106, 2022.

    • Search Google Scholar
    • Export Citation
  • [12]

    P. Kapalo and N. Spodyniuk, “Effect of the variable air volume on energy consumption - Case study,” IOP Conf. Ser. Mater. Sci. Eng., vol. 415, 2018, Paper no. 012027.

    • Search Google Scholar
    • Export Citation
  • [13]

    N. Spodyniuk, V. Zhelykh, and O. Dzeryn, “Combined heating systems of premises for breeding of young pigs and poultry,” FME Trans., vol. 46, no. 4, pp. 651657, 2018.

    • Search Google Scholar
    • Export Citation
  • [14]

    O. Voznyak, N. Spodyniuk, O. Savchenko, I. Sukholova, M. Kasynets, and O. Dovbush, “Efficiency of the heating convectors with aluminum ribbing,” Pollack Period., vol. 17, no. 3, pp. 129134, 2022.

    • Search Google Scholar
    • Export Citation
  • [15]

    P. Lis and A. Lis, “Energy performance of building heating - Theory and reality on the example of educational buildings,” MATEC Web Conf., vol. 174, 2018, Paper no. 01018.

    • Search Google Scholar
    • Export Citation
  • [16]

    E. Juodis, E. Jaraminiene, and E. Dudkiewicz, “Inherent variability of heat consumption in residential buildings,” Energy Build., vol. 41, no. 11, pp. 11881194, 2009.

    • Search Google Scholar
    • Export Citation
  • [17]

    Y. Cao, J. Yang, and J. Li, “Energy-saving research on residential gas heating system in cold area based on system dynamics,” Int. J. Heat Technol., vol. 38, no. 2, pp. 457462, 2020.

    • Search Google Scholar
    • Export Citation
  • [18]

    M. Seredynski, M. Wasik, P. Lapka, P. Furmanski, L. Cieslikiewicz, K. Pietrak, M. Kubis, T. Wisniewski, and M. Jaworski, “Analysis of non-equilibrium and equilibrium models of heat and moisture transfer in a wet porous building material,” Energies, vol. 13, no. 1, 2020. Paper no. 214.

    • Search Google Scholar
    • Export Citation
  • [19]

    B. Janetti, L. Colombo, F. Ochs, and W. Feist, “Effect of evaporation cooling on drying capillary active building materials,” Energy Build, vol. 166, pp. 550560, 2018.

    • Search Google Scholar
    • Export Citation
  • [20]

    Y. Wang, C. Ma, Y. Liu, D. Wang, and J. Liu, “Effect of moisture migration and phase change on effective thermal conductivity of porous building materials,” Int. J. Heat Mass. Tran., vol. 125, pp. 330342, 2018.

    • Search Google Scholar
    • Export Citation
  • [21]

    G. Pia, J. Cai, Z. Zhang, and S. Liu, “Advances in modelling of heat and mass transfer in porous materials,” Adv. Mater. Sci. Eng., 2019, Paper no. 7089718.

    • Search Google Scholar
    • Export Citation
  • [22]

    P. Kapalo, O. Voznyak, Y. Yurkevych, K. Myroniuk, and I. Sukholova, “Ensuring comfort microclimate in the classrooms under condition of the required air exchange,” East. Eur. J. Enterprise Tech., vol. 5, no. 10(95), pp. 614, 2018.

    • Search Google Scholar
    • Export Citation
  • [23]

    T. Pietrucha, “Ability to determine the quality of indoor air in classrooms without sensors,” E3S Web Conf., vol. 17, 2017, Paper no. 00073.

    • Search Google Scholar
    • Export Citation
  • [24]

    N. Spodyniuk, O. Voznyak, I. Sukholova, O. Dovbush, M. Kasynets, and O. Datsko, “Diagnosis of damage to the ventilation system,” Diagnostyka, vol. 22, no. 3, pp. 9199, 2021.

    • Search Google Scholar
    • Export Citation
  • [25]

    O. Savchenko, V. Zhelykh, Y. Yurkevych, S. Shapoval, and K. Kozak, “Using vortex tube for decreasing losses of natural gas in engineering system of gas supply,” Pollack Period., vol. 13, no. 3, pp. 241250, 2018.

    • Search Google Scholar
    • Export Citation
  • [26]

    I. Kvaraya, I. Iremashvili, A. Ujma, and A. Phirosmanishvili, “Effectiveness of reduced model using during building of reinforced monolithic dome,” IOP Conf. Ser. Mater. Sci. Eng., vol. 698, no. 5, 2019, Paper no. 055005.

    • Search Google Scholar
    • Export Citation
  • [27]

    M. Wasik, Ł. Cieslikiewicz, P. Łapka, P. Furmanski, M. Kubis, M. Seredynski, K. Pietrak, T. Wisniewski, and M. Jaworski, “Initial credibility analysis of a numerical model of heat and moisture transfer in porous building materials,” AIP Conf. Proc., vol. 2019, 2078, Paper no. 020106.

    • Search Google Scholar
    • Export Citation
  • [28]

    B. Basok, B. Davydenko, S. Isaev, S. Goncharuk, and L. Kuzhel’, “Numerical modeling of heat transfer through a triple-pane window,” J. Eng. Phys. Thermophys., vol. 89, no. 5, pp. 12771283, 2016.

    • Search Google Scholar
    • Export Citation
  • [29]

    B. Basok, B. Davydenko, and A. Pavlenko, “Numerical network modeling of heat and moisture transfer through capillary-porous building materials,” Materials, vol. 14, no. 8, 2021. Paper no. 1819.

    • Search Google Scholar
    • Export Citation
  • [30]

    V. Kaplun and V. Shcherbak, “Multifactor analysis of university buildings’ energy efficiency,” Actual Probl. Econ., vol. 186, no. 12, pp. 349359, 2016.

    • Search Google Scholar
    • Export Citation
  • [31]

    M. Aedah, “Energy audit a step to effective energy management,” Int. J. Trend Res. Dev., vol. 5, no. 2, 2018, Paper no. 521525.

  • [32]

    V. Gorobets, I. Antypov, Y. Bohdan, and V. Trokhaniak, “Numerical and experimental researches of thermal energy storage processes during phase transformations of phase change materials with nanoparticles,” E3S Web Conf. , vol. 128, 2019, Paper no. 04003.

    • Search Google Scholar
    • Export Citation
  • [33]

    V. Gorobets, V. Trokhaniak, I. Rogovskii, L. Titova, T. Lendiel, A. Dudnyk, and M. Masiuk, “The numerical simulation of hydrodynamics and mass transfer processes for ventilating system effective location,” INMATEH - Agric. Eng., vol. 56, no. 3, pp. 185192, 2018.

    • Search Google Scholar
    • Export Citation
  • [34]

    V. Gorobets, V. Trokhaniak, M. Masiuk, N. Spodyniuk, O. Blesnyuk, and Y. Marchishina, “CFD modeling of aerodynamic flow in a wind turbine with vertical rotational axis and wind flow concentrator,” Agric. Eng., vol. 64, no. 2, pр. 159166, 2021.

    • Search Google Scholar
    • Export Citation
  • [35]

    O. Voznyak, N. Spodyniuk, Yu. Yurkevych, I. Sukholova, and O. Dovbush, “Enhancing efficiency of air distribution by swirled-compact air jets in the mine using the heat utilizators,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 5, pp. 8994, 2020.

    • Search Google Scholar
    • Export Citation
  • [36]

    S. Shapoval, N. Spodyniuk, V. Zhelykh, V. Shepitchak, and P. Shapoval, “Application of rooftop solar panels with coolant natural circulation,” Pollack Period., vol. 16, no. 1, pp. 132137, 2021.

    • Search Google Scholar
    • Export Citation
  • Collapse
  • Expand
The author instructions template is available in MS Word.
Please, download the file from HERE.

 

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Petra Bujňáková (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS
  • CABELLS Journalytics

 

2023  
Scopus  
CiteScore 1.5
CiteScore rank Q3 (Civil and Structural Engineering)
SNIP 0.849
Scimago  
SJR index 0.288
SJR Q rank Q3

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription fee 2025 Online subsscription: 381 EUR / 420 USD
Print + online subscription: 456 EUR / 520 USD
Subscription Information Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

2023  
Scopus  
CiteScore 1.5
CiteScore rank Q3 (Civil and Structural Engineering)
SNIP 0.849
Scimago  
SJR index 0.288
SJR Q rank Q3

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Jan 2024 134 19 1
Feb 2024 160 2 0
Mar 2024 137 0 0
Apr 2024 28 0 0
May 2024 42 0 0
Jun 2024 78 0 0
Jul 2024 29 0 0