Authors:
Orest Voznyak Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Orest Voznyak in
Current site
Google Scholar
PubMed
Close
,
Victor Kaplun Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Victor Kaplun in
Current site
Google Scholar
PubMed
Close
,
Nadiia Spodyniuk Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Nadiia Spodyniuk in
Current site
Google Scholar
PubMed
Close
https://orcid.org/0000-0002-2865-9320
,
Edyta Dudkiewicz Department of Air Conditioning, Heating, Gas Engineering and Air Protection, Faculty of Environmental Engineering, Wrocław University of Science and Technology, Wroclaw, Poland

Search for other papers by Edyta Dudkiewicz in
Current site
Google Scholar
PubMed
Close
,
Oleksandr Dovbush Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Oleksandr Dovbush in
Current site
Google Scholar
PubMed
Close
,
Iryna Sukholova Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Iryna Sukholova in
Current site
Google Scholar
PubMed
Close
, and
Mariana Kasynets Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Mariana Kasynets in
Current site
Google Scholar
PubMed
Close
https://orcid.org/0000-0002-7686-7482
Restricted access

Abstract

This article is related to investigations of the capture hoods of the local exhaust ventilation. The purpose of the research: to increase the zone of action of local exhaust hoods and reduce the amount of air removed. It is equipped with two barriers for air: ring and cylindrical. The empirical dependences for air velocity determination near the suction zone are obtained. Graphs, chart and three-dimensional image visualizations of removed air jet velocity near capture hood with barriers for air are designed. The reduction of production energy consumption, material, and ventilation system maintenance costs due to the correction of the design of the capture hood are the main benefits of the new solution.

  • [1]

    S. Kubacki and E. Dick, “Convective heat transfer prediction for an axisymmetric jet impinging onto a flat plate with an improved k–ω model,” Int. J. Numer. Methods Heat Fluid Flow. vol. 19, no. 8, pp. 960981, 2009.

    • Search Google Scholar
    • Export Citation
  • [2]

    Local exhaust ventilation (LEV), 2019. [Online]. Available: https://www.worksafe.qld.gov.au/safety-and-prevention/creating-safe-work/managing-risks/local-exhaust-ventilation-lev. Accessed: Oct. 22, 2019.

    • Search Google Scholar
    • Export Citation
  • [3]

    О. Voznyak, N. Spodyniuk, O. Savchenko, O. Dovbush, M. Kasynets, and O. Datsko, “Analysis of premise infrared heating and ventilation with an exhaust outlet and flat decking air flow,” Diagnostyka , vol. 23, no. 2, 2022, Paper no. 2022207.

    • Search Google Scholar
    • Export Citation
  • [4]

    N. Tovondrainya, S. Abideb, B. Zeghmatib, C. Raminosoaa, and M. A. Randriazanamparany, “Numerical study of heat transfer and flow characteristics of air jet in a semi-confined cavity,” Energy Proced. , vol. 139, pp. 682688, 2017.

    • Search Google Scholar
    • Export Citation
  • [5]

    J. Vlachopoulos and J. F. Tomich, “Heat transfer from a turbulent hot air jet impinging normally on a flat plate,” Can. J. Chem. Eng. , vol. 49, no. 4, pp. 462466, 1971.

    • Search Google Scholar
    • Export Citation
  • [6]

    P. Kapalo, A. Sedláková, D. Košicanová, O. Voznyak, J. Lojkovics, and P. Siroczki, “Effect of ventilation on indoor environmental quality in buildings,” in The 9th International Conference on Environmental Engineering, Vilnius, Lithuania, Selected Papers, 2014, pp. 1–6.

    • Search Google Scholar
    • Export Citation
  • [7]

    S. Kordana-Obuch, M. Starzec, M. Wojtoń, and D. Słyś, “Greywater as a future sustainable energy and water source: Bibliometric mapping of current knowledge and strategies,” Energies , vol. 16, no. 2, 2023, Paper no. 934.

    • Search Google Scholar
    • Export Citation
  • [8]

    E. Dudkiewicz, N. Fidorów-Kaprawy, and P. Szałański, “Environmental benefits and energy savings from gas radiant heaters’ flue-gas heat recovery,” Sustainabilty, vol. 14, 2022, Paper no. 8013.

    • Search Google Scholar
    • Export Citation
  • [9]

    Ł. Amanowicz, K. Ratajczak, and E. Dudkiewicz, “Recent advancements in ventilation systems used to decrease energy consumption in buildings - literature review,” Energies, vol. 16, no. 4, 2023, Paper no. 1853.

    • Search Google Scholar
    • Export Citation
  • [10]

    O. Savchenko, V. Zhelykh, Y. Yurkevych, S. Shapoval, and K. Kozak, “Using vortex tube for decreasing losses of natural gas in engineering systems of gas supply,” Pollack Period., vol. 13, no. 3, pp. 241250, 2018.

    • Search Google Scholar
    • Export Citation
  • [11]

    N. Spodyniuk, V. Zhelykh, and O. Dzeryn, Combined heating systems of premises for breeding of young pigs and poultry,” FME Trans., vol. 46, no. 4, pp. 651657, 2018.

    • Search Google Scholar
    • Export Citation
  • [12]

    S. Shapoval, N. Spodyniuk, V. Zhelykh, V. Shepitchak, and P. Shapoval, “Application of rooftop solar panels with coolant natural circulation,” Pollack Period. , vol. 16, no. 1, pp. 132137, 2021.

    • Search Google Scholar
    • Export Citation
  • [13]

    M. Kasynets, K. Kozak, B. Piznak, and I. Venhryn, “Enhancing of efficiency of solar panels combined with buildings coating,” Proceedings of EcoComfort 2022, Lviv, Ukraine, September 14–16, 2022, Lecture Notes in Civil Engineering, Z. Blikharskyy, Ed., vol. 290, 2023, pp. 136149.

    • Search Google Scholar
    • Export Citation
  • [14]

    Z. Blikharskyy, N. Shnal, and R. Khmil, “The influence of the damaged reinforcing bars on the stress-strain state of the rein-forced concrete beams,” Prod. Eng. Arch., vol. 14, no. 14, pp. 2326, 2017.

    • Search Google Scholar
    • Export Citation
  • [15]

    Y. V. Kharchenko, Z. Y. Blikharskyy, V. V. Vira, and B. D. Vasyliv, “Study of structural changes in a nickel oxide containing anode material during reduction and oxidation at 600 °C,” in Proceedings on Nanocomposites, Nanostructures, and Their Applications, Kyiv, Ukraine, August 27–30, 2018, Springer Proceedings in Physics, vol. 221, 2019, pp. 595604.

    • Search Google Scholar
    • Export Citation
  • [16]

    P. Novosad, O. Pozniak, V. Melnyk, and S. Braichenko, “Porous thermal insulation materials on organic and mineral fillers,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, Lecture Notes in Civil Engineering, Z. Blikharskyy, P. Koszelnik, P. Mesaros, Eds, vol. 47, 2020, pp. 354360.

    • Search Google Scholar
    • Export Citation
  • [17]

    U. Marushchak, M. Sanytsky, N. Sydor, and S. Braichenko, “Research of impact resistance of nanomodified fiberreinforced concrete,” MATEC Web Conf., 2018, vol. 230, Paper no. 03012.

    • Search Google Scholar
    • Export Citation
  • [18]

    O. Hunyak, K. Sobol, T. Markiv, and V. Bidos, “The effect of natural pozzolans on properties of vibropressed interlocking concrete blocks in different curing conditions,” Prod. Eng. Arch., vol. 22, no. 22, pp. 36.

    • Search Google Scholar
    • Export Citation
  • [19]

    U. Marushchak, M. Sanytsky, O. Pozniak, and O. Mazurak, “Peculiarities of nanomodified portland systems structure formation,” Chem. Chem. Technol. , vol. 13, no. 4, pp. 510517, 2019.

    • Search Google Scholar
    • Export Citation
  • [20]

    B. Basok, B. Davydenko, G. Farenuyk, and S. Goncharuk, “Computational modeling of the temperature regime in a room with a two-panel radiator,” J. Eng. Phys. Thermophys. , vol. 87, no. 6, pp. 14331437, 2014.

    • Search Google Scholar
    • Export Citation
  • [21]

    K. Dikarev, O. Kuzmenko, V. Petrenko, P. Sankov, L. Kyslytsia, and N. Ibadov, “Experimental study of operating indicators of a thermalactic covering panel,” Sci. Innovation, vol. 16, no. 2, pp. 5765, 2020.

    • Search Google Scholar
    • Export Citation
  • [22]

    O. Voznyak, N. Spodyniuk, O. Savchenko, I. Sukholova, and M. Kasynets, “Еnhancing of energetic and economic efficiency of coal mines heating by infrared heaters,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu , vol. 2, no. 182, pp. 104109, 2021.

    • Search Google Scholar
    • Export Citation
  • [23]

    V. Zhelykh, O. Voznyak, Yu. Yurkevych, I. Sukholova, and O. Dovbush, “Enhancing of energetic and economic efficiency of air distribution by swirled-compact air jets,” Prod. Eng. Arch. , vol. 27, no. 3, pp. 171175, 2021.

    • Search Google Scholar
    • Export Citation
  • [24]

    V. Korbut, O. Voznyak, Kh. Myroniuk, I. Sukholova, P. Kapalo, “Examining a device for air distribution by the interaction of counter non-coaxial jets under alternating mode,” East. Eur. J. Enterprise Tech., vol. 2, no. 8, 3038, 2017.

    • Search Google Scholar
    • Export Citation
  • [25]

    O. Voznyak, I. Sukholova, K. Myroniuk, “Research of device for air distribution with swirl and spread air jets at variable mode,” East. Eur. J. Enterprise Tech. , vol. 6, no. 7, pp. 1523, 2015.

    • Search Google Scholar
    • Export Citation
  • [26]

    О. Voznyak, V. Korbut, B. Davydenko, and І. Sukholova, “Air distribution efficiency in a room by a two-flow device,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, Lecture Notes in Civil Engineering, Z. Blikharskyy, P. Koszelnik, P. Mesaros, Eds, vol. 47, 2020, pp. 526533.

    • Search Google Scholar
    • Export Citation
  • [27]

    K. Myroniuk, O. Voznyak, Yu. Yurkevych, and B. Gulay, “Technical and economic efficiency after the boiler room renewal,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16–18, 2020, Lecture Notes in Civil Engineering, Z. Blikharskyy, Ed., vol. 100, 2021, pp. 311318.

    • Search Google Scholar
    • Export Citation
  • [28]

    V. Petrenko, K. Dykarev, D. Volchok, and O. Kuzmenko, “Evaluation of indoor temperature for various building envelopes damaged,” E3S Web of Conf. , vol. 32, 2018, Paper no. 01019.

    • Search Google Scholar
    • Export Citation
  • [29]

    V. Petrenko, K. Dikarev, A. Petrenko, and R. Papirnyk, “The calculation of indoor air forecast temperature of a space with the replaceable thermotechnical characteristics of the enclosure structures while in operation,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16–18, 2022, Lecture Notes in Civil Engineering, Z. Blikharskyy, Ed., vol. 100, 2021, pp. 319–327.

    • Search Google Scholar
    • Export Citation
  • [30]

    L. Bytčanková, J. Rumann, and P. Dušička, “Distribution of flow velocity in a shaft intake structure,” Pollack Period. , vol. 17, no. 1, pp. 8387, 2022.

    • Search Google Scholar
    • Export Citation
  • [31]

    O. Voznyak, Y. Yurkevych, O. Dovbush, and Y. Serediuk, “The influence of chairs and passengers on air velocity in bus passenger compartment,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, Lecture Notes in Civil Engineering, Z. Blikharskyy, P. Koszelnik, P. Mesaros, Eds, vol. 47, 2020, pp. 518525.

    • Search Google Scholar
    • Export Citation
  • [32]

    Z. Poorova and Z. Vranayova, “Humidity, air temperature, CO2 and well-being of people with and without green wall,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16–18, 2020, Lecture Notes in Civil Engineering, Z. Blikharskyy, Ed., vol. 100, 2021, pp. 336346.

    • Search Google Scholar
    • Export Citation
  • [33]

    F. Vranay and Z. Vranayova, “Influence of heat source choice on building energy certification process and CO2 emissions,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, Lecture Notes in Civil Engineering, Z. Blikharskyy, P. Koszelnik, P. Mesaros, Eds, vol. 47, 2020, pp. 541548.

    • Search Google Scholar
    • Export Citation
  • [34]

    O. Voznyak, K. Myroniuk, I. Sukholova, and P. Kapalo, “The impact of air flows on the environment,” in Proceedings of CEE 2019, Lviv, Ukraine, September 11–13, 2019, Lecture Notes in Civil Engineering, Z. Blikharskyy, P. Koszelnik, P. Mesaros, Eds, vol. 47, 2020, pp. 534540.

    • Search Google Scholar
    • Export Citation
  • [35]

    M. Adamski, “MathModelica in modeling of countercurrent heat exchangers,” in Proceedings, 8th EUROSIM Congress on Modeling and Simulation, Cardiff, UK, Sept. 10–13, 2013, pp. 439442.

    • Search Google Scholar
    • Export Citation
  • [36]

    Y. Kharchenko and Ł. Dragun, “Mathematical modeling of unsteady processes in electromechanical system of ring-ball mill,” Diagnostyka, vol. 18, no. 1, pp. 2535, 2017.

    • Search Google Scholar
    • Export Citation
  • [37]

    R. Khmil, R. Tytarenko, Y. Blikharskyy, and P. Vegera, “The probabilistic calculation model of RC beams, strengthened by RC jacket,” in Proceedings of EcoComfort 2020, Lviv, Ukraine, September 16–18, 2020, Lecture Notes in Civil Engineering, Z. Blikharskyy, Ed., vol. 100, 2021, pp. 182191.

    • Search Google Scholar
    • Export Citation
  • [38]

    V. Kovalchuk, Y. Bolzhelarskyi, B. Parneta, A. Pentsak, O. Petrenko, and I. Mudryy, “Evaluation of the stressed-strained state of crossings of the 1/11 type turnouts by the finite element method,” Eastern-European J. Enterprise Tech., vol. 4, no. 7, pp. 1016, 2017.

    • Search Google Scholar
    • Export Citation
  • [39]

    V. Labay, O. Savchenko, V. Zhelykh, and K. Kozak, “Mathematical modeling of the heating process in a vortex tube at the gas distribution stations,” Math. Model. Comput. , vol. 6, no. 2, pp. 311319, 2019.

    • Search Google Scholar
    • Export Citation
  • [40]

    O. Ostash, V. Panasyuk, I. Andreiko, R. Chepil’, V. Kulyk, and V. Vira, “Methods for the construction of the diagrams of fatigue crack-growth rate of materials,” Mater. Sci., vol. 43, no. 4, pp. 479491, 2007.

    • Search Google Scholar
    • Export Citation
  • [41]

    A. Yefimov and T. Potanina, “Application of interval analysis for improving reliability of estimation of hardness value spread for nuclear structural materials,” Probl. At. Sci. Technol., vol. 125, no. 1, pp. 206210, 2020.

    • Search Google Scholar
    • Export Citation
  • [42]

    V. Zhuk, L. Vovk, I. Matlai, I. Popadiuk,.I. Mysak, and V. Fasuliak, “Dependency between the total and effective imperviousness for residential quarters of the Lviv city,” J. Ecol. Eng., vol. 21, no. 5, pp. 5662, 2020.

    • Search Google Scholar
    • Export Citation
  • [43]

    I. Peleshko and V. Yurchenko, “Parametric optimization of metal rod structures using the modified gradient projection method,” Int. Appl. Mech. , vol. 57, no. 4, pp. 440454, 2021.

    • Search Google Scholar
    • Export Citation
  • [44]

    V. Gorobets, V. Trokhaniak, M. Masiuk, N. Spodyniuk, O. Blesnyuk, and Y. Marchishina, “CFD modeling of aerodynamic flow in a wind turbine with vertical rotational axis and wind flow concentrator,” Agric. Eng., vol. 64, no. 2, pр. 159166, 2021.

    • Search Google Scholar
    • Export Citation
  • [45]

    O. Voznyak, N. Spodyniuk, I. Sukholova, O. Dovbush, M. Kasynets, and O. Datsko, “Diagnosis of damage to the ventilation system,” Diagnostyka, vol. 22, no. 3, pp. 9199, 2021.

    • Search Google Scholar
    • Export Citation
  • [46]

    O. Voznyak, N. Spodyniuk, I. Sukholova, O. Savchenko, M. Kasynets, and O. Datsko, “Diagnosis of three types damages to the ventilation system,” Diagnostyka , vol. 23, no. 1, 2022, Paper no. 2022102.

    • Search Google Scholar
    • Export Citation
  • [47]

    О. Voznyak, O. Savchenko, N. Spodyniuk, I. Sukholova, M. Kasynets, and O. Dovbush, “Improving of ventilation efficiency at air distribution by the swirled air jets,” Pollack Period., vol. 17, no. 1, pp. 123127, 2022.

    • Search Google Scholar
    • Export Citation
  • [48]

    O. Voznyak, N. Spodyniuk, Yu. Yurkevych, I. Sukholova, and O. Dovbush, “Enhancing efficiency of air distribution by swirled-compact air jets in the mine using the heat utilizators,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 5, no. 179, pp. 8994, 2020.

    • Search Google Scholar
    • Export Citation
  • [49]

    V. Zhuk, O. Verbovskyi, and I. Popadiuk, “Experimental regulating parameters of bladder-type hydraulic accumulator,” Int. J. Appl. Mech. Eng., vol. 27, no. 1, pp. 232243, 2022.

    • Search Google Scholar
    • Export Citation
  • [50]

    V. Zhuk, I. Matlai, I. L. Vovk, and I. Popadiuk, “Analytical and experimental assessment of regulating volume of the stormwater storage tanks for rains of constant intensity,” in Proceedings of EcoComfort 2022, Lviv, Uktaine, 14–16 September, 2022, Lecture Notes in Civil Engineering, Z. Blikharskyy, Ed, vol. 290, 2023., pp. 459–469.

    • Search Google Scholar
    • Export Citation
  • Collapse
  • Expand
The author instructions template is available in MS Word.
Please, download the file from HERE.

 

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Petra Bujňáková (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS
  • CABELLS Journalytics

 

2022  
Web of Science  
Total Cites
WoS
not indexed
Journal Impact Factor not indexed
Rank by Impact Factor

not indexed

Impact Factor
without
Journal Self Cites
not indexed
5 Year
Impact Factor
not indexed
Journal Citation Indicator not indexed
Rank by Journal Citation Indicator

not indexed

Scimago  
Scimago
H-index
14
Scimago
Journal Rank
0.298
Scimago Quartile Score

Civil and Structural Engineering (Q3)
Computer Science Applications (Q3)
Materials Science (miscellaneous) (Q3)
Modeling and Simulation (Q3)
Software (Q3)

Scopus  
Scopus
Cite Score
1.4
Scopus
CIte Score Rank
Civil and Structural Engineering 256/350 (27th PCTL)
Modeling and Simulation 244/316 (22nd PCTL)
General Materials Science 351/453 (22nd PCTL)
Computer Science Applications 616/792 (22nd PCTL)
Software 344/404 (14th PCTL)
Scopus
SNIP
0.861

2021  
Web of Science  
Total Cites
WoS
not indexed
Journal Impact Factor not indexed
Rank by Impact Factor

not indexed

Impact Factor
without
Journal Self Cites
not indexed
5 Year
Impact Factor
not indexed
Journal Citation Indicator not indexed
Rank by Journal Citation Indicator

not indexed

Scimago  
Scimago
H-index
12
Scimago
Journal Rank
0,26
Scimago Quartile Score Civil and Structural Engineering (Q3)
Materials Science (miscellaneous) (Q3)
Computer Science Applications (Q4)
Modeling and Simulation (Q4)
Software (Q4)
Scopus  
Scopus
Cite Score
1,5
Scopus
CIte Score Rank
Civil and Structural Engineering 232/326 (Q3)
Computer Science Applications 536/747 (Q3)
General Materials Science 329/455 (Q3)
Modeling and Simulation 228/303 (Q4)
Software 326/398 (Q4)
Scopus
SNIP
0,613

2020  
Scimago
H-index
11
Scimago
Journal Rank
0,257
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
340/243=1,4
Scopus
Cite Score Rank
Civil and Structural Engineering 219/318 (Q3)
Computer Science Applications 487/693 (Q3)
General Materials Science 316/455 (Q3)
Modeling and Simulation 217/290 (Q4)
Software 307/389 (Q4)
Scopus
SNIP
1,09
Scopus
Cites
321
Scopus
Documents
67
Days from submission to acceptance 136
Days from acceptance to publication 239
Acceptance
Rate
48%

 

2019  
Scimago
H-index
10
Scimago
Journal Rank
0,262
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
269/220=1,2
Scopus
Cite Score Rank
Civil and Structural Engineering 206/310 (Q3)
Computer Science Applications 445/636 (Q3)
General Materials Science 295/460 (Q3)
Modeling and Simulation 212/274 (Q4)
Software 304/373 (Q4)
Scopus
SNIP
0,933
Scopus
Cites
290
Scopus
Documents
68
Acceptance
Rate
67%

 

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription fee 2023 Online subsscription: 336 EUR / 411 USD
Print + online subscription: 405 EUR / 492 USD
Subscription Information Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

Pollack Periodica
Language English
Size A4
Year of
Foundation
2006
Volumes
per Year
1
Issues
per Year
3
Founder Akadémiai Kiadó
Founder's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 1788-1994 (Print)
ISSN 1788-3911 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Dec 2023 300 9 2
Jan 2024 149 8 5
Feb 2024 187 1 2
Mar 2024 149 1 0
Apr 2024 48 0 0
May 2024 57 0 0
Jun 2024 37 0 0