View More View Less
  • 1 Budapest University of Technology and Economics Department of Structural Engineering, Faculty of Civil Engineering Bertalan u. 2 H-1111 Budapest Hungary
Restricted access

Purchase article

USD  $25.00

Purchase this article

USD  $387.00

Timber joints are usually considered as perfectly pinned or stiff against rotation during the calculations of engineering timber structures. However the semi-rigid behavior the joints cannot be avoided in case of accurate calculations. In this paper the rotational stiffness and the full moment-rotational behavior of dowel-type timber joints were analyzed using computer algorithm validated by finite element analysis. Based on the numerical calculation and the experimental results the paper describes the influences of the joint geometry, the grain direction and the number and position of connectors on the moment-rotational behavior.

  • Marzo A. Methodology for the analysis of complex historical wooden structures, Pollack Periodica , Vol. 1, No. 1, 2006, pp. 35–52.

    Marzo A. , 'Methodology for the analysis of complex historical wooden structures ' (2006 ) 1 Pollack Periodica : 35 -52.

    • Search Google Scholar
  • Noguchi M., Komatsu K. A new method for estimating stiffness and strength in bolted timber-to-timber joints and its verification by experiments (II): bolted cross-lapped beam to column joints, Wood Sci . Vol. 50, No. 5, 2004, pp. 391–399.

    Komatsu K. , 'A new method for estimating stiffness and strength in bolted timber-to-timber joints and its verification by experiments (II): bolted cross-lapped beam to column joints ' (2004 ) 50 Wood Sci : 391 -399.

    • Search Google Scholar
  • Bouchair A., Racher P., Bocquet J. F. Analysis of dowelled timber to timber momentresisting joints, Materials and Structures , Vol. 40, No. 10, 2007, pp. 1127–1141

    Bocquet J. F. , 'Analysis of dowelled timber to timber momentresisting joints ' (2007 ) 40 Materials and Structures : 1127 -1141.

    • Search Google Scholar
  • MSZ EN 1995-1-1:2004 Eurocode 5 , Design of timber structures Part 1-1: General. Common rules and rules for buildings, 2005.

  • Haller P. Semi-rigid timber joints-structural behavior, modeling and new technologies, Final Report of Working Group on Timber Joints , 1999.

  • Erdődi L, Bódi I, Numerical determination of the slip modulus of dowel-type timber joints, Pollack Periodica , Vol. 2, No. 3, 2007. pp. 35–44.

    Bódi I. , 'Numerical determination of the slip modulus of dowel-type timber joints ' (2007 ) 2 Pollack Periodica : 35 -44.

    • Search Google Scholar
All Time Past Year Past 30 Days
Abstract Views 13 13 1
Full Text Views 2 1 0
PDF Downloads 1 1 0