In this paper, the influence of two selected parameters (the welding time and the presence of the activating flux on the surface of the base metal) on the weld joint at Stud Arc Welding process is investigated. In the experimental part of the paper, the drawn arc stud welding process with the ceramic ferrule is applied with the different welding time and the application of the activating flux for ATIG process. In order to evaluate the influence of the welding time and the activating flux on the weld characteristics, the cast zone width and Vickers hardness HV 0.2 are measured.
Köveš A. Analysis of the welding process in MIG/MAG welding of clean and unclean surfaces in various shielding gas mixtures, 2. Međunarodno znanstveno-stručno savjetovanje Specijalni postupci i proizvodi u tehnici zavarivanja, Slavonski Brod, Croatia, 19–21 November 2003, pp. 41–52.
Suban M, Tušek J. Methods for the determination of arc stability, Journal of Materials Processing Technology, Vol. 143–144, 2003, pp. 430–437.
Tušek J., 'Methods for the determination of arc stability' (2003) 143–144Journal of Materials Processing Technology: 430-437.
Tušek J.Methods for the determination of arc stabilityJournal of Materials Processing Technology2003143–144430437)| false
Nishikawa W. The principle and application field of stud welding, Welding International, Vol. 17, No. 9, 2003 pp. 699–705, (Selected from Journal of the Japan Welding Society, Vol. 71, No. 8, 2002, pp. 27–32; Reference JJ/02/8/27; Translation 3170, pp. 699–705.)
Nishikawa W., 'The principle and application field of stud welding' (2003) 17Welding International: 699-705.
Nishikawa W.The principle and application field of stud weldingWelding International200317699705)| false
Samardžić I, Žagar D, Klarić Š. Application and upgrade of on-line monitoring system for measurement and processing of electric signals at arc stud welding process, Strojarstvo, Vol. 51, No. 4, 2009, pp. 355–363.
Klarić , 'Application and upgrade of on-line monitoring system for measurement and processing of electric signals at arc stud welding process' (2009) 51Strojarstvo: 355-363.
Klarić Application and upgrade of on-line monitoring system for measurement and processing of electric signals at arc stud welding processStrojarstvo200951355363)| false
Köveš A. High-productivity A-TIG welding, (in Croation) Zbornik 4. Međunarodno znanstveno-stručno savjetovanje, I. Samardžić (Ed.), Slavonski Brod, Croatia, 14–16 November 2007, pp. 45–51.
Bajić D. Investigating of the possibilities to weld the power equipment assemblies using activating flux, (in Montenegrin), Doctoral dissertations, Mašinski fakultet u Podgorici, Podgorica 2003, pp. 30–61.
Wilcox C. D, Dove S. B, McDavid W. D, Greer D. B. UTHSCSA imagetool, Department of Dental Diagnostic Science The Univ. of Texas Health Science Center, SAD, 2002,
, (Last visited 20 October 2010)