View More View Less
  • 1 Budapest University of Technology and Economics Department of Machine and Product Design Budapest, Bertalan Lajos u. 1-3 H-1111 Budapest Hungary
Restricted access

Purchase article

USD  $25.00

Purchase this article

USD  $387.00

The goal of the research is to examine the different reconstruction solutions, which are used for the often-occurring jaw cancer resection and finding those areas that show higher potential risks of implant fracture. Within the research some finite element analysis based on data provided by Computer tomography have been concluded. The model in practice is built up with the most frequently used reconstruction plates and monocortical screws. Both lock and non-lock system solutions were examined. The results supporting the practice showed that indeed the maximal stress would rise in the implants closer to the resection in case of screws and in case of plates this will occur in the closer areas of resection within the thinner cross-sections.

  • Bujtar P., Avery C., Simonovics J., Sandor G. K., Pan J. Refinements in osteotomy design to improve structural integrity: a finite element analysis study, British Journal of Oral and Maxillofacial Surgery, Vol. 10, 2012, (in Press).

  • Keller T. S. Predicting the compressive mechanical behavior of bone, Journal of Biomechanics, Vol. 27, No. 9, 1994 pp. 1159–1168.

    Keller T. S. , 'Predicting the compressive mechanical behavior of bone ' (1994 ) 27 Journal of Biomechanics : 1159 -1168.

    • Search Google Scholar
  • Avery C. M. E. Review of the radial free flap: still evolving or facing extinction? Part two: osteocutaneous radial free flap, Brit J. Oral Maxillofac Surg, Vol. 48, 2010 pp. 253–260.

    Avery C. M. E. , 'Review of the radial free flap: still evolving or facing extinction? Part two: osteocutaneous radial free flap ' (2010 ) 48 Brit J. Oral Maxillofac Surg : 253 -260.

    • Search Google Scholar
  • Avery C. M. E., Best A., Patterson P., Rolton J., Ponter A. R. S. Biomechanical study of prophylactic internal fixation of the radial osteocutaneous donor site using the sheep tibia model, Brit J. Oral Maxillofac Surg, Vol. 45, 2007 pp. 441–446.

    Ponter A. R. S. , 'Biomechanical study of prophylactic internal fixation of the radial osteocutaneous donor site using the sheep tibia model ' (2007 ) 45 Brit J. Oral Maxillofac Surg : 441 -446.

    • Search Google Scholar
  • Simonovics J., Bodzay T., Váradi K. Study and examination of the implements used for securing pelvis bone, Biomechanica Hungarica, Vol. III, No. 1, 2010. pp. 215–223.

    Váradi K. , 'Study and examination of the implements used for securing pelvis bone ' (2010 ) III Biomechanica Hungarica : 215 -223.

    • Search Google Scholar
  • Kober C., Erdmann B., Sader R., Zeilhofer H. F. Simulation of the human mandible: comparison of bone mineral density and stress/strain profiles due to masticatory muscles’ traction, 10th Workshop on The Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields, Ulm, Germany, 17–18 July 2003 pp. 1–18.

  • Bujtár P., Sándor G. K., Bojtos A., Szűcs A., Barabás J. Finite element analysis of the human mandible at 3 different stages of life, Oral Surg Oral Med Oral Pathol Oral Radiol Endod, Vol. 110, 2010 pp. 301–309.

    Barabás J. , 'Finite element analysis of the human mandible at 3 different stages of life ' (2010 ) 110 Oral Surg Oral Med Oral Pathol Oral Radiol Endod : 301 -309.

    • Search Google Scholar
  • Szucs A., Bujtar P., Sandor G. K., Barabas J. Finite element analysis of the human mandible to assess the effect of removing an impacted third molar, J. Can Dent Assoc. Vol. 76, 2010 pp. a72.

    Barabas J. , 'Finite element analysis of the human mandible to assess the effect of removing an impacted third molar ' (2010 ) 76 J. Can Dent Assoc : a72 -.

    • Search Google Scholar
  • Ramos A., Mesnard M., Relvas C., Completo A., Ballu A., Morlier J., Simões J. A. The influence of condylar geometry and positions of bone fixation screws on a TMJ implant, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 13, 2010 pp. 115–116.

    Simões J. A. , 'The influence of condylar geometry and positions of bone fixation screws on a TMJ implant ' (2010 ) 13 Computer Methods in Biomechanics and Biomedical Engineering : 115 -116.

    • Search Google Scholar
  • Adl A. S., Dammak M., Paiement G. Experimental determination of friction characteristics at the trabecular bone/porous coated metal interface in cementless implants, Journal of Biomedical Materials Research, Vol. 27, No. 2, 1993 pp. 167–175.

    Paiement G. , 'Experimental determination of friction characteristics at the trabecular bone/porous coated metal interface in cementless implants ' (1993 ) 27 Journal of Biomedical Materials Research : 167 -175.

    • Search Google Scholar
  • Simonovics J., Bujtár P., Avery C. M. E., Sándor G. K., Pan J., Váradi K. Study and examination of the implements used for prophylactic internal fixation, Gépészet 2012, Mechanical Engineering 2012, 8th International Conference on Mechanical Engineering Budapest, Hungary, 24–25 May 2012 pp. 482–487.

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Jun 2020 0 2 0
Jul 2020 5 0 0
Aug 2020 1 0 0
Sep 2020 0 0 0
Oct 2020 1 0 0
Nov 2020 0 0 0
Dec 2020 0 0 0