View More View Less
  • 1 Budapest University of Technology and Economics Department of Construction Materials and Engineering Geology, Faculty of Civil Engineering Műegyetem rakpart 3 H-1111 Budapest Hungary
Restricted access

Purchase article

USD  $25.00

Purchase this article

USD  $387.00

Development of biomineralizing techniques requires new or borrowed methods, as well as instruments for the evaluation of the efficacy of the biomineralization. The aim of the research was to evaluate the appropriateness of two existing techniques for measuring the surface hardness and material loss of microbially treated porous limestone surfaces. Measurements were done with Duroscope, and with the peeling-tape method. The techniques were tested in a comparison trial, where different bio-based curing compounds were applied on porous Sóskút limestone slabs. Two of the bio-based, and the conventional compounds show higher development in the surface rebound values (86.67 to 201.1%) and higher decrease in material-loss (−39.5 to 96.3%) compared to the control specimen. Through statistical analysis of statistical samples with a high number of results, the suitability of the techniques was evaluated.

  • De Muynck W., De Belie N., Verstraeteb W. Microbial carbonate precipitation in construction materials, A review, Ecological Engineering, Vol. 36, 2010, pp. 118–136.

    Verstraeteb W. , 'Microbial carbonate precipitation in construction materials, A review ' (2010 ) 36 Ecological Engineering : 118 -136.

    • Search Google Scholar
  • Adolphe J. P., Loubière J. F., Paradas J., Soleilhavoup F., Procédé de traitement biologique d’une surface artificielle. European patent 90400G97.0. 1990 (after French patent 8903517, 1989).

    Soleilhavoup F. , '', in Procédé de traitement biologique d’une surface artificielle , (1990 ) -.

  • Török Á., Surface strength and mineralogy of weathering crusts on limestone buildings in Budapest, Building and Environment, Vol. 38, 2003, pp. 1185–1192.

    Török Á. , 'Surface strength and mineralogy of weathering crusts on limestone buildings in Budapest ' (2003 ) 38 Building and Environment : 1185 -1192.

    • Search Google Scholar
  • Jroundi F., Fernández-Vivas A., Rodriguez-Navarro C. J. Bedmar E., González-Muñoz M. T. Bioconservation of deteriorated monumental calcarenite stone and identification of bacteria with carbonatogenic activity, Microbial Ecology, Vol. 60, No. 1, 2010, pp. 39–54.

    González-Muñoz M. T. , 'Bioconservation of deteriorated monumental calcarenite stone and identification of bacteria with carbonatogenic activity ' (2010 ) 60 Microbial Ecology : 39 -54.

    • Search Google Scholar
  • Tiano P., Cantisani E., Sutherland I., Paget J. M. Biomediated reinforcement of weathered calcareous stones, Journal of Cultural Heritage, Vol. 7, 2006, pp. 49–55.

    Paget J. M. , 'Biomediated reinforcement of weathered calcareous stones ' (2006 ) 7 Journal of Cultural Heritage : 49 -55.

    • Search Google Scholar
  • Pápay Z., Török Á. Evaluation of the efficiency of consolidants on Hungarian porous limestone by non-destructive test methods, Central European Geology, Vol. 50, No. 4, 2007, pp. 299–312.

    Török , 'Evaluation of the efficiency of consolidants on Hungarian porous limestone by non-destructive test methods ' (2007 ) 50 Central European Geology : 299 -312.

    • Search Google Scholar
  • Nemcsics Á. Contribution to a round church reconstructed from its foundation wall, Pollack Periodica, Vol. 6, 2011, No. 1, pp. 87–98.

    Nemcsics Á. , 'Contribution to a round church reconstructed from its foundation wall ' (2011 ) 6 Pollack Periodica : 87 -98.

    • Search Google Scholar
  • Rao S. M., Scotto C. S., Brinker J., Ross T. Development of a surface-scpecific, antiweathering stone preservative treatment, In Brebbia C. A., Sanchez-Beitia S. (Eds) Structural Studies, Repairs and Maintenance of Historical Buildings, Computational Mechanics Publication, Southampton, UK, 1997, pp. 233–242.

    Ross T. , '', in Structural Studies, Repairs and Maintenance of Historical Buildings , (1997 ) -.

  • Mosquera M. J., de los Santos D. M., Montes A., Vedez-Castro L. New nanomaterials for consolidating stone, Langmuir, Vol. 24, 2008, pp. 2732–2778.

    Vedez-Castro L. , 'New nanomaterials for consolidating stone ' (2008 ) 24 Langmuir : 2732 -2778.

    • Search Google Scholar
  • De Muynck, W., Verbeken K., De Belie N., Verstraete W. Influence of urea and calcium dosage on the effectiveness of bacterially induced carbonate precipitation on limestone, Ecological Engineering, Vol. 36, 2010, pp. 99–111.

    Verstraete W. , 'Influence of urea and calcium dosage on the effectiveness of bacterially induced carbonate precipitation on limestone ' (2010 ) 36 Ecological Engineering : 99 -111.

    • Search Google Scholar
Submit Your Manuscript
 
The author instructions template is available in MS Word.
Please, download the file from HERE.

 

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Ján Bujňák (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS

 

2020  
Scimago
H-index
11
Scimago
Journal Rank
0,257
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
340/243=1,4
Scopus
Cite Score Rank
Civil and Structural Engineering 219/318 (Q3)
Computer Science Applications 487/693 (Q3)
General Materials Science 316/455 (Q3)
Modeling and Simulation 217/290 (Q4)
Software 307/389 (Q4)
Scopus
SNIP
1,09
Scopus
Cites
321
Scopus
Documents
67
Days from submission to acceptance 136
Days from acceptance to publication 239
Acceptance
Rate
48%

 

2019  
Scimago
H-index
10
Scimago
Journal Rank
0,262
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
269/220=1,2
Scopus
Cite Score Rank
Civil and Structural Engineering 206/310 (Q3)
Computer Science Applications 445/636 (Q3)
General Materials Science 295/460 (Q3)
Modeling and Simulation 212/274 (Q4)
Software 304/373 (Q4)
Scopus
SNIP
0,933
Scopus
Cites
290
Scopus
Documents
68
Acceptance
Rate
67%

 

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription Information Online subsscription: 321 EUR / 402 USD
Print + online subscription: 384 EUR / 480 USD
Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

Pollack Periodica
Language English
Size B5
Year of
Foundation
2006
Publication
Programme
2021 Volume 16
Volumes
per Year
1
Issues
per Year
3
Founder Akadémiai Kiadó
Founder's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 1788-1994 (Print)
ISSN 1788-3911 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Feb 2021 4 0 0
Mar 2021 2 0 0
Apr 2021 3 0 0
May 2021 2 0 0
Jun 2021 3 0 0
Jul 2021 0 0 0
Aug 2021 0 0 0