View More View Less
  • 1 Department of Physics, Faculty of Sciences, University Abdelmalek Essaadi, 93030 Tetouan, , Morocco
  • | 2 Department of Industrial and Civil Sciences and Technologies, National School of Applied Sciences, University Abdelmalek Essaadi, 93030 Tetouan, , Morocco
Restricted access

Purchase article

USD  $25.00

Purchase this article

USD  $387.00

Abstract

Advanced control of variable speed horizontal wind turbine was considered in the high wind speed range. The aims of control in this region are to limit and stabilize the rotor speed and electrical power to their nominal values, while reducing the fatigue loads acting on the structure. A new nonlinear technique based on combination between sliding mode control and radial basis function neural network control was investigated. The proposed hybrid controller was implemented via MATLAB on a simplified two masses numerical model of wind turbine. By applying the Lyapunov approach, this controller was shown to ensure stability. It was found also to be robust and able to reject the uncertainties associated to system nonlinearities. The obtained results were compared with those provided by an existing controller.

  • [1]

    X. Yin , W. Zhang , Z. Jiang , and L. Pan , “Adaptive robust integral sliding mode pitch angle control of an electro-hydraulic servo pitch system for wind turbine,” Mech. Syst. Signal Process., vol. 133, 2019, Paper no. 105704.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [2]

    B. Boukhezzar , L. Lupu , H. Siguerdidjane , and M. Hand , “Multivariable control strategy for variable speed, variable pitch wind turbines,” Renew. Energy, vol. 32, no. 8, pp. 12731287, 2007.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [3]

    E. J. Novaes Menezes , A. M. Araújo , J. S. Rohatgi , and P. M. González del Foyo , “Active load control of large wind turbines using state-space methods and disturbance accommodating control,” Energy, vol. 150, pp. 310319, 2018.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [4]

    V. Kállai , G. L. SzepesiI , and P. Mizsey , “Dynamic simulation control in a cryogenic distillation column,” Pollack Period., vol. 15, no. 3, pp. 91100, 2020.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [5]

    H. Habibi , H. Rahimi Nohooji , and I. Howard , “Adaptive PID control of wind turbines for power regulation with unknown control direction and actuator faults,” IEEE Access, vol. 6, pp. 3746437479, 2018.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [6]

    Z. Wang , Z. Shen , C. Cai , and K. Jia , “Adaptive control of wind turbine generator system based on RBF-PID neural network,” in Proc. Int. Jt. Conf. Neural Networks, Beijing, China, July 6–11, 2014, pp. 538543.

    • Search Google Scholar
    • Export Citation
  • [7]

    X. X. Yin , Y. G. Lin , W. Li , Y. J. Gu , P. F. Lei , and H. W. Liu , “Adaptive back-stepping pitch angle control for wind turbine based on a new electro-hydraulic pitch system,” Int. J. Control, vol. 88, no. 11, pp. 23162326, 2015.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [8]

    Q. Yang , X. Jiao , Q. Luo , Q. Chen , and Y. Sun , “L1 adaptive pitch angle controller of wind energy conversion systems,” ISA Trans., vol. 103, pp. 2836, 2020.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [9]

    F. Hajdu , P. Szalai , P. Mika , and R. Kuti , “Parameter identification of a fire truck suspension for vibration analysis,” Pollack Period., vol. 14, no. 3, pp. 5162, 2019.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [10]

    M. Abolvafaei and S. Ganjefar , “Maximum power extraction from a wind turbine using second-order fast terminal sliding mode control,” Renew. Energy, vol. 139, pp. 14371446, 2019.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [11]

    E. El Mjabber , A. El Hajjaji , and A. Khamlichi , “An adaptive control for a variable speed wind turbine using RBF neural network,” in International Conference on Structural Nonlinear Dynamics and Diagnosis, Marrakech, Maroc, May 23–25, 2016, MATEC Web of Conferences, vol. 83, 2016, Paper no. 09007.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [12]

    E. K. El Mjabber , A. El Hajjaji , and A. Khamlichi , “Analysis of a RBF neural network based controller for pitch angle of variable-speed wind turbines,” Proced. Eng., vol. 181, pp. 552559, 2017.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [13]

    M. Abolvafaei and S. Ganjefar , “Maximum power extraction from wind energy system using homotopy singular perturbation and fast terminal sliding mode method,” Renew. Energy, vol. 148, pp. 611626, 2019.

    • Crossref
    • Search Google Scholar
    • Export Citation
  • [14]

    J. Liu , Radial Basis Function (RBF) Neural Network Control for Mechanical Systems. Berlin Heidelberg: Springer-Verlag, 2013.

  • [15]

    B. Boukhezzar and H. Siguerdidjane , “Nonlinear control of a variable-speed wind turbine using a two-mass model,” IEEE Trans. Energy Convers., vol. 26, no. 1, pp. 149162, 2011.

    • Crossref
    • Search Google Scholar
    • Export Citation
Submit Your Manuscript
 
The author instructions template is available in MS Word.
Please, download the file from HERE.

 

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Ján Bujňák (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS

 

2020  
Scimago
H-index
11
Scimago
Journal Rank
0,257
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
340/243=1,4
Scopus
Cite Score Rank
Civil and Structural Engineering 219/318 (Q3)
Computer Science Applications 487/693 (Q3)
General Materials Science 316/455 (Q3)
Modeling and Simulation 217/290 (Q4)
Software 307/389 (Q4)
Scopus
SNIP
1,09
Scopus
Cites
321
Scopus
Documents
67
Days from submission to acceptance 136
Days from acceptance to publication 239
Acceptance
Rate
48%

 

2019  
Scimago
H-index
10
Scimago
Journal Rank
0,262
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
269/220=1,2
Scopus
Cite Score Rank
Civil and Structural Engineering 206/310 (Q3)
Computer Science Applications 445/636 (Q3)
General Materials Science 295/460 (Q3)
Modeling and Simulation 212/274 (Q4)
Software 304/373 (Q4)
Scopus
SNIP
0,933
Scopus
Cites
290
Scopus
Documents
68
Acceptance
Rate
67%

 

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription fee 2022 Online subsscription: 327 EUR / 411 USD 321
Print + online subscription: 393 EUR / 492 USD
Subscription Information Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

Pollack Periodica
Language English
Size A4
Year of
Foundation
2006
Volumes
per Year
1
Issues
per Year
3
Founder Akadémiai Kiadó
Founder's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 1788-1994 (Print)
ISSN 1788-3911 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Aug 2021 0 0 0
Sep 2021 0 0 0
Oct 2021 0 0 0
Nov 2021 111 8 11
Dec 2021 28 0 0
Jan 2022 16 3 0
Feb 2022 0 0 0