Authors:
Orest Voznyak Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Orest Voznyak in
Current site
Google Scholar
PubMed
Close
,
Nadiia Spodyniuk Department of Heat and Power Engineering, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Nadiia Spodyniuk in
Current site
Google Scholar
PubMed
Close
,
Iryna Sukholova Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Iryna Sukholova in
Current site
Google Scholar
PubMed
Close
https://orcid.org/0000-0002-3319-2278
,
Olena Savchenko Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Olena Savchenko in
Current site
Google Scholar
PubMed
Close
,
Mariana Kasynets Department of Heat and Gas Supply and Ventilation, Institute of Civil Engineering and Building Systems, Lviv Polytechnic National University, Lviv, Ukraine

Search for other papers by Mariana Kasynets in
Current site
Google Scholar
PubMed
Close
, and
Serhii Shostak Department of Higher and Applied Mathematics, Education and Research Institute of Energetics, Automation and Energy Efficiency, National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Search for other papers by Serhii Shostak in
Current site
Google Scholar
PubMed
Close
Restricted access

Abstract

This article is dedicated to diagnosis of damage to air distribution in a room with twisted, compact, and flat air jets, and to searching of ways to solving the problem. It was found that in order to avoid damage to the air distribution system in rooms of different purposes and dimensions; it should be air streams of the appropriate types and with the appropriate characteristics. Parameters of a swirled, compact, flat, rectangular air jet when creating comfortable climatic conditions in the rooms of different purposes and dimensions are determined. The relationship between the angle of inclination of the rotating plates (for twisted jets), ratio of sides of the slit (for all rectangular including compact and flat streams) and a long-range of these flows is established.

  • [1]

    I. Bullova, P. Kapalo, and D. Katunsky, “Quantification of air rate change by selected methods in a typical apartment building,” Buildings, vol. 11, no. 4, pp. 120, 2021.

    • Search Google Scholar
    • Export Citation
  • [2]

    N. Buyak, V. Deshko, and I. Sukhodub, “Buildings energy use and human thermal comfort according to energy and exergy approach,” Energy Build., vol. 146, no. 1, pp. 172181, 2017.

    • Search Google Scholar
    • Export Citation
  • [3]

    V. Deshko and N. Buyak, “A model of human thermal comfort for analyzing the energy performance of buildings,” Eastern-European J. Enterprise Tech., vol. 4, no. 8(82), pp. 4248, 2016.

    • Search Google Scholar
    • Export Citation
  • [4]

    P. Kapalo, H. Klymenko, V. Zhelykh, and M. Adamski, “Investigation of indoor air quality in the selected Ukraine classroom – Case study,” in Proceedings of CEE 2019, Lecture Notes in Civil Engineering, vol. 47, 2020, pp. 168173.

    • Search Google Scholar
    • Export Citation
  • [5]

    M. Adamski, “Ventilation system with spiral recuperator,” Energy Build., vol. 42, no. 5, pp. 674677, 2010.

  • [6]

    M. Adamski, "Longitudinal spiral recuperators in ventilation systems of healthy buildings,” in Proceedings of Healthy Buildings: Creating a Healthy Indoor Environment for People, vol. 4, Lisbon, Portugal, June 4–8, 2006, pp. 341344.

    • Search Google Scholar
    • Export Citation
  • [7]

    V. Dovhaliuk and V. Mileikovskyi, “New approach for refined efficiency estimation of air exchange organization,” Int. J. Eng. Technol., vol. 7, no. 3.2, pp. 591596, 2018.

    • Search Google Scholar
    • Export Citation
  • [8]

    B. Hulai, O. Dovbush, B. Piznak, and M. Kasynets, “Studying equalization of the radial fans discharge flow,” in Proceedings of CEE 2019, Lecture Notes in Civil Engineering, vol. 47, 2020, pp. 119126.

    • Search Google Scholar
    • Export Citation
  • [9]

    О. Voznyak, O. Savchenko, N. Spodyniuk, I. Sukholova, M. Kasynets, and O. Dovbush, “Improving of ventilation efficiency at air distribution by the swirled air jets,” Pollack Period., vol. 17, no. 1, pp. 123127, 2022.

    • Search Google Scholar
    • Export Citation
  • [10]

    О. Voznyak, O. Savchenko, N. Spodyniuk, I. Sukholova, M. Kasynets, and O. Dovbush, “Air distribution efficiency improving in the premises by rectangular air streams,” Pollack Period., vol. 17 no. 3, pp. 111116, 2022.

    • Search Google Scholar
    • Export Citation
  • [11]

    Y. Wen, Q. Guo, P. Xiao, and T. Ming, “The impact of opening sizing on the airflow distribution of double skin façade,” Proced. Eng., vol. 205, pp. 41114116, 2017.

    • Search Google Scholar
    • Export Citation
  • [12]

    P. Kapalo, A. Sedláková, D. Košicanová, O. Voznyak, J. Lojkovics, and P. Siroczki, “Effect of ventilation on indoor environmental quality in buildings,” in The 9th International Conference on Environmental Engineering, Selected papers, Vilnius, Lithuania, May 22–23, 2014, СD 265.

    • Search Google Scholar
    • Export Citation
  • [13]

    P. Kapalo, S. Vilceková, F. Domnita, and O. Voznyak, “Determine a methodology for calculating the needed fresh air,” in The 9th International Conference on Environmental Engineering, Selected papers, Vilnius, Lithuania, May 22–23, 2014, СD 264.

    • Search Google Scholar
    • Export Citation
  • [14]

    P. Kapalo, S. Vilčeková, L. Mečiarová, F. Domnita, and M. Adamski, “Influence of indoor climate on employees in office buildings - A case study,” Sustainability, vol. 12, no. 14, 2020, Art no. 5569.

    • Search Google Scholar
    • Export Citation
  • [15]

    M. Kherais, A. Csébfalvi, and A. Len, “Moisture content changing of a historic roof structure in terms of climate effects,” Pollack Period., vol. 17, no. 3, pp. 141146, 2022.

    • Search Google Scholar
    • Export Citation
  • [16]

    P. Kapalo, and N. Spodyniuk, “Effect of the variable air volume on energy consumption – Case study,” in IOP Conference S eries: Materials Science and Engineering, vol. 415, no. 1, 2018, Art no. 012027.

    • Search Google Scholar
    • Export Citation
  • [17]

    P. Kapalo, M. Sulewska, and M. Adamski, “Examining the Interdependence of the various parameters of indoor air,” in Proceedings of EcoComfort 2020, Lecture Notes in Civil Engineering, vol. 100, 2021, pp. 150157.

    • Search Google Scholar
    • Export Citation
  • [18]

    Z. Poorova, M. Alhosni, P. Kapalo, and Z. Vranayova, “Change of temperature in the room with the living wall,” in IOP Conference S eries: Materials Science and Engineering, vol. 603, no. 5, 2019, Art no. 052063.

    • Search Google Scholar
    • Export Citation
  • [19]

    Y. Lee and Y. Kim, “Analysis of indoor air pollutants and guidelines for space and physical activities in multi-purpose activity space of elementary schools,” Energies, vol. 15, no. 1, 2022, Art no. 220.

    • Search Google Scholar
    • Export Citation
  • [20]

    T. Pietrucha, “Ability to determine the quality of indoor air in classrooms without sensors,” in E3S W eb of Conferences, vol. 17, 2017, Art no. 00073.

    • Search Google Scholar
    • Export Citation
  • [21]

    T. Tkachenko and V. Mileikovskyi, “Increasing indoor air quality by a natural sanitizing interior,” in The 1st JESSD Symposium: International Symposium of Earth, Energy, Environmental Science and Sustainable Development, E3S Web of Conferences, vol. 211, 2020, Art no. 02015.

    • Search Google Scholar
    • Export Citation
  • [22]

    I. Bilous, V. Deshko, and I. Sukhodub, “Parametric analysis of external and internal factors influence on building energy performance using non-linear multivariate regression models,” J. Building Eng., vol. 20, pp. 327336, 2018.

    • Search Google Scholar
    • Export Citation
  • [23]

    E. Latosov, A. Volkova, A. Siirde, M. Thalfeldt, and J. Kurnitski, “The impact of parallel energy consumption on the district heating networks,” Environ. Clim. Tech., vol. 23, no. 1, pp. 113, 2019.

    • Search Google Scholar
    • Export Citation
  • [24]

    H. Pieper, I. Krupenski, W. B. Markussen, T. Ommen, A. Siirde, and A. Volkova, “Method of linear approximation of COP for heat pumps and chillers based on thermodynamic modeling and off-design operation,” Energy, vol. 230, 2021, Art no. 120743.

    • Search Google Scholar
    • Export Citation
  • [25]

    O. Savchenko, V. Zhelykh, Y. Yurkevych, S. Shapoval, and K. Kozak, “Using vortex tube for decreasing losses of natural gas in engineering system of gas supply,” Pollack Period., vol. 13, no. 3, pp. 241250, 2018.

    • Search Google Scholar
    • Export Citation
  • [26]

    O. Voznyak, N. Spodyniuk, O. Savchenko, I. Sukholova, and M. Kasynets, “Enhancing energetic and economic efficiency of heating coal mines by infrared heaters,” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 2, pp. 104109, 2021.

    • Search Google Scholar
    • Export Citation
  • [27]

    O. Voznyak, N. Spodyniuk, O. Savchenko, I. Sukholova, M. Kasynets, and O. Dovbush, “Efficiency of the heating convectors with aluminum ribbing,” Pollack Period., vol. 17, no. 3, pp. 129134, 2022.

    • Search Google Scholar
    • Export Citation
  • [28]

    V. Zhelykh, M. Ulewicz, N. Spodyniuk, S. Shapoval, and V. Shepitchak, “Analysis of the processes of heat exchange on infrared heater surface,” Diagnostyka, vol. 17, no. 3, pp. 8185, 2016.

    • Search Google Scholar
    • Export Citation
  • [29]

    M. Adamski, and P. Kiszkiel, “Condensation phenomena and frost problems in the air heat recuperators,” in MATEC W eb of Conferences, vol. 18, 2014, Art no. 01001.

    • Search Google Scholar
    • Export Citation
  • [30]

    O. Voznyak, Yu. Yurkevych, O. Dovbush, and Ya. Serediuk, “The influence of chairs and passengers on air velocity in bus passenger compartment,” in Proceedings of CEE 2019, Lecture Notes in Civil Engineering, vol. 47, 2019, pp. 518525.

    • Search Google Scholar
    • Export Citation
  • [31]

    L . Bytčanková, J. Rumann, and P. Dušička, “Distribution of flow velocity in a shaft intake structure,” Pollack Period., vol. 17, no. 1, pp. 8387, 2022.

    • Search Google Scholar
    • Export Citation
  • [32]

    V. Dovhaliuk, O. Gumen, V. Mileikovskyi, and V. Dziubenko, “Simplified analysis of turbulence intensity in curvilinear wall jets,” FME Trans., vol. 46, pp. 177182, 2018.

    • Search Google Scholar
    • Export Citation
  • [33]

    O. Gumen, V. Dovhaliuk, V. Mileikovskyi, O. Lebedieva, and V. Dziubenko, “Geometric analysis of turbulent macrostructure in jets laid on flat surfaces for turbulence intensity calculation,” FME Trans., vol. 45, pp. 236242, 2017.

    • Search Google Scholar
    • Export Citation
  • [34]

    R. Hnativ and O. Verbovskiy, “Distribution of local velocities in a circular pipe with accelerating fluid flow,” Eastern-European J. Enterprise Tech., vol. 2, no 7(78), pp. 5863, 2019.

    • Search Google Scholar
    • Export Citation
  • [35]

    O. Voznyak, N. Spodyniuk, I. Sukholova, O. Dovbush, M. Kasynets, and O. Datsko, “Diagnosis of damage to the ventilation system,” Diagnostyka, vol. 22, no. 3, pp. 9199, 2021.

    • Search Google Scholar
    • Export Citation
  • [36]

    O. Voznyak, N. Spodyniuk, I. Sukholova, O. Savchenko, M. Kasynets, and O. Datsko, “Diagnosis of three types of damages to the ventilation system,” Diagnostyka, vol. 23, no. 1, 2022, Art no. 2022102.

    • Search Google Scholar
    • Export Citation
  • [37]

    H. Andersson, M. Cehlin, and B. Moshfegh, “Experimental and numerical investigations of a new ventilation supply device based on confluent jets,” Build. Environ., vol. 137, pp. 1833, 2018.

    • Search Google Scholar
    • Export Citation
  • [38]

    S. Khovanskyi, I. Pavlenko, J. Pitel, J. Mizakova, M. Ochowiak, and I. Grechka, “Solving the coupled aerodynamic and thermal problem for modeling the air distribution devices with perforated plates,” Energies, vol. 12, no. 18, 2019, Art no. 3488.

    • Search Google Scholar
    • Export Citation
  • [39]

    О. Voznyak, V. Korbut, B. Davydenko, and І. Sukholova, “Air distribution efficiency in a room by a two-flow device,” Adv. Recourse-Saving Tech. Mater. Civil Environ. Eng., vol. 47, pp. 526533, 2019.

    • Search Google Scholar
    • Export Citation
  • [40]

    O. Voznyak, I. Sukholova, and K. Myroniuk, “Research of device for air distribution with swirl and spread air jets at variable mode,” East. Eur. J. Enterprise Tech., vol. 6, no. 7(78), pp. 1523, 2015.

    • Search Google Scholar
    • Export Citation
  • [41]

    E. Mjabber, A. Khamlichi, and A. Hajjaji, “Nonlinear control of wind turbine in above rated wind speed region,” Pollack Period., vol. 17, no. 1, pp. 7277, 2022.

    • Search Google Scholar
    • Export Citation
  • [42]

    C. Rumsey and P. Spalart, “Turbulence model behavior in low Reynolds number regions of aerodynamic flow fields,” AIAA J., vol. 47, no. 4, pp. 982993, 2009.

    • Search Google Scholar
    • Export Citation
  • [43]

    P. Spalart and A. Garbaruk, “The predictions of common turbulence models in a mature vortex,” Flow, Turbulence Combust., vol. 102, pp. 667677, 2019.

    • Search Google Scholar
    • Export Citation
  • [44]

    P. Kapalo, L. Meciarova, S. Vilcekova, E. Burdova, F. Domnita, C. Bacotiu, and K. Peterfi, “Investigation of CO2 production depending on physical activity of students,” Int. J. Environ. Health Res., vol. 29, no. 1, pp. 3144, 2019.

    • Search Google Scholar
    • Export Citation
  • [45]

    P. Kapalo, S. Vilcekova, and O. Voznyak, “Using experimental measurements the concentrations of carbon dioxide for determining the intensity of ventilation in the rooms,” Chem. Eng. Trans., vol. 39, pp. 17891794, 2014.

    • Search Google Scholar
    • Export Citation
  • [46]

    Z. Poorova and Z. Vranayova, “Humidity, air temperature, CO2 and well-being of people with and without green wall,” in Proceedings of EcoComfort 2020, Lecture Notes in Civil Engineering, vol. 100, 2021, pp. 336346.

    • Search Google Scholar
    • Export Citation
  • [47]

    F. Vranay and Z. Vranayova, “Influence of heat source choice on building energy certification process and CO2 emissions,” in Proceedings of CEE 2019, Lecture Notes in Civil Engineering, vol. 47, 2020, pp. 541548.

    • Search Google Scholar
    • Export Citation
  • [48]

    B. Gulay, I. Sukholova, O. Dzeryn, and V. Shepitchak, “Investigations of compact recuperators acoustic properties,” in Proceedings of EcoComfort 2020, Lecture Notes in Civil Engineering, vol. 100, 2021, pp. 127–133.

    • Search Google Scholar
    • Export Citation
  • [49]

    M. Adamski, “MathModelica in modeling of countercurrent heat exchangers,” in Proceedings of the 8th EUROSIM Congress on Modeling and Simulation, Cardiff, UK, September 10–13, 2013, pp. 439442.

    • Search Google Scholar
    • Export Citation
  • [50]

    H. Klymenko, V. Labay, V. Yaroslav, and M. Gensetskyi, “Criteria equation for the description of low-speed air distributor operation,” Proceedings of CEE 2019, Lecture Notes in Civil Engineering, vol. 47, pp. 235242, 2020.

    • Search Google Scholar
    • Export Citation
  • [51]

    M. S. Al-Din Tahir, S. S. Hassan, and J. S. Chiad, “The mathematical model for lateral stiffness of variable length conical spring,” Pollack Period., vol. 17, no. 2, pp. 3135, 2022.

    • Search Google Scholar
    • Export Citation
  • [52]

    A. Yefimov and T. Potanina, “Application of interval analysis for improving reliability of estimation of hardness value spread for nuclear structural materials,” Probl. At. Sci. Technol., vol. 125, no. 1, pp. 206210, 2020.

    • Search Google Scholar
    • Export Citation
  • [53]

    T. Kropyvnytska, R. Semeniv, and H. Ivashchyshyn, “Increase of brick masonry durability for external walls of buildings and structures,” MATEC Web of Conferences, vol. 116, 2017, Art no. 01007.

    • Search Google Scholar
    • Export Citation
  • [54]

    T. Shnal, S. Pozdieiev, R. Yakovchuk, O. Nekora, “Development of a mathematical model of fire spreading in a three-storey building under full-scale fire-response tests,” in Proceedings of EcoComfort 2020, Lecture Notes in Civil Engineering, vol. 100, 2021, pp. 419428.

    • Search Google Scholar
    • Export Citation
  • [55]

    V. Osypenko and V. Kaplun, “Modeling of dynamic energy-management scenarios in local polygeneration microgrids using inductive Bi-clustering algorithm,” in International Scientific and Technical Conference on Computer Sciences and Information Technologies, Lviv, Ukraine, September 17–20, 2019, pp. 183186.

    • Search Google Scholar
    • Export Citation
  • [56]

    E. Lorin, “From structured data to evolution linear partial differential equations,” J. Comput. Phys., vol. 393, pp. 162185, 2019.

    • Search Google Scholar
    • Export Citation
  • [57]

    E. Lorin, A. Benhajali, and A. Soulaimani, “Positivity preserving finite element-finite volume solver for the Spalart-Allmaras turbulence todel,” Computer Methods Appl. Mech. Eng., vol. 196, pp. 20972116, 2007.

    • Search Google Scholar
    • Export Citation
  • [58]

    G. Coleman, C. Rumsey, and P. Spalart, “Numerical study of turbulent separation bubbles with varying pressure gradient and Reynolds number,” J. Fluid Mech., vol. 847, pp. 2870, 2018.

    • Search Google Scholar
    • Export Citation
  • [59]

    F. M. Kadhim, E. Z. Gheni, A. T. Naiyf, and M. S. Al-Din Tahir, “Optimal material selection based on finite element method for manufacturing hip implant,” Pollack Period., vol. 17, no. 2, pp. 6064, 2022.

    • Search Google Scholar
    • Export Citation
  • [60]

    R. Wittmanová, J. Hrudka, I. Marko, A. Raczková, and Š. Stanko, “Dynamic modeling of flow in combined sewer network using the mouse model,” Pollack Period., vol. 17, no. 3, pp. 8993, 2022.

    • Search Google Scholar
    • Export Citation
  • [61]

    V. Trokhaniak, N. Spodyniuk, O. Trokhaniak, O. Shelimanova, P. Luzan, and O. Luzan, “Investigation of the influence of exhaust fan's location on the upper line on poultry house aerodynamics with the use of CFD,” INMATEH - Agric. Eng., vol. 67, no. 2, pp. 425432, 2022.

    • Search Google Scholar
    • Export Citation
  • [62]

    O. Voznyak, N. Spodyniuk, O. Dovbush, O. Savchenko, I. Sukholova, M. Kasynets, and I. Kirakevych, “Research of the round convective air jet of the exhaust local ventilation,” Pollack Period., vol. 18, no. 1, pp. 6065, 2023.

    • Search Google Scholar
    • Export Citation
  • [63]

    О. Voznyak, N. Spodyniuk, O. Savchenko, O. Dovbush, M. Kasynets, O. Datsko, “Analysis of premise infrared heating and ventilation with an exhaust outlet and flat decking air flow,” Diagnostyka, vol. 23, no. 2, 2022, Art no. 2022207.

    • Search Google Scholar
    • Export Citation
  • [64]

    K. Dikarev, O. Kuzmenko, V. Petrenko, P. Sankov, L. Kyslytsia, and N. Ibadov, “Experimental study of operating indicators of a thermalactic covering panel,” Sci. Innovation, vol. 16, no. 2, pp. 5765, 2020.

    • Search Google Scholar
    • Export Citation
  • [65]

    V. Zhuk, O. Verbovskyi, and I. Popadiuk, “Experimental regulating parameters of bladder-type hydraulic accumulator,” Int. J. Appl. Mech. Eng., vol. 27, no. 1, pp. 232243, 2022.

    • Search Google Scholar
    • Export Citation
  • [66]

    V. Polishchuk, S. Tarasenko, I. Antypov, N. Kozak, A. Zhyltsov, and A. Bereziuk, “Investigation of the efficiency of wet biodiesel purification,” in E3S Web of Conferences, vol. 154, 2020, Art no. 020066.

    • Search Google Scholar
    • Export Citation
  • Collapse
  • Expand
Submit Your Manuscript
 
The author instructions template is available in MS Word.
Please, download the file from HERE.

 

Senior editors

Editor(s)-in-Chief: Iványi, Amália

Editor(s)-in-Chief: Iványi, Péter

 

Scientific Secretary

Miklós M. Iványi

Editorial Board

  • Bálint Bachmann (Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Jeno Balogh (Department of Civil Engineering Technology, Metropolitan State University of Denver, Denver, Colorado, USA)
  • Radu Bancila (Department of Geotechnical Engineering and Terrestrial Communications Ways, Faculty of Civil Engineering and Architecture, “Politehnica” University Timisoara, Romania)
  • Charalambos C. Baniotopolous (Department of Civil Engineering, Chair of Sustainable Energy Systems, Director of Resilience Centre, School of Engineering, University of Birmingham, U.K.)
  • Oszkar Biro (Graz University of Technology, Institute of Fundamentals and Theory in Electrical Engineering, Austria)
  • Ágnes Borsos (Institute of Architecture, Department of Interior, Applied and Creative Design, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Matteo Bruggi (Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, Italy)
  • Petra Bujňáková (Department of Structures and Bridges, Faculty of Civil Engineering, University of Žilina, Slovakia)
  • Anikó Borbála Csébfalvi (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Mirjana S. Devetaković (Faculty of Architecture, University of Belgrade, Serbia)
  • Szabolcs Fischer (Department of Transport Infrastructure and Water Resources Engineering, Faculty of Architerture, Civil Engineering and Transport Sciences Széchenyi István University, Győr, Hungary)
  • Radomir Folic (Department of Civil Engineering, Faculty of Technical Sciences, University of Novi Sad Serbia)
  • Jana Frankovská (Department of Geotechnics, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • János Gyergyák (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Kay Hameyer (Chair in Electromagnetic Energy Conversion, Institute of Electrical Machines, Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Germany)
  • Elena Helerea (Dept. of Electrical Engineering and Applied Physics, Faculty of Electrical Engineering and Computer Science, Transilvania University of Brasov, Romania)
  • Ákos Hutter (Department of Architecture and Urban Planning, Institute of Architecture, Faculty of Engineering and Information Technolgy, University of Pécs, Hungary)
  • Károly Jármai (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Teuta Jashari-Kajtazi (Department of Architecture, Faculty of Civil Engineering and Architecture, University of Prishtina, Kosovo)
  • Róbert Kersner (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Rita Kiss  (Biomechanical Cooperation Center, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Budapest, Hungary)
  • István Kistelegdi  (Department of Building Structures and Energy Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Stanislav Kmeť (President of University Science Park TECHNICOM, Technical University of Kosice, Slovakia)
  • Imre Kocsis  (Department of Basic Engineering Research, Faculty of Engineering, University of Debrecen, Hungary)
  • László T. Kóczy (Department of Information Sciences, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, University of Győr, Hungary)
  • Dražan Kozak (Faculty of Mechanical Engineering, Josip Juraj Strossmayer University of Osijek, Croatia)
  • György L. Kovács (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Balázs Géza Kövesdi (Department of Structural Engineering, Faculty of Civil Engineering, Budapest University of Engineering and Economics, Budapest, Hungary)
  • Tomáš Krejčí (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Jaroslav Kruis (Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Czech Republic)
  • Miklós Kuczmann (Department of Automations, Faculty of Mechanical Engineering, Informatics and Electrical Engineering, Széchenyi István University, Győr, Hungary)
  • Tibor Kukai (Department of Engineering Studies, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Maria Jesus Lamela-Rey (Departamento de Construcción e Ingeniería de Fabricación, University of Oviedo, Spain)
  • János Lógó  (Department of Structural Mechanics, Faculty of Civil Engineering, Budapest University of Technology and Economics, Hungary)
  • Carmen Mihaela Lungoci (Faculty of Electrical Engineering and Computer Science, Universitatea Transilvania Brasov, Romania)
  • Frédéric Magoulés (Department of Mathematics and Informatics for Complex Systems, Centrale Supélec, Université Paris Saclay, France)
  • Gabriella Medvegy (Department of Interior, Applied and Creative Design, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Tamás Molnár (Department of Visual Studies, Institute of Architecture, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Ferenc Orbán (Department of Mechanical Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Zoltán Orbán (Department of Civil Engineering, Institute of Smart Technology and Engineering, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Dmitrii Rachinskii (Department of Mathematical Sciences, The University of Texas at Dallas, Texas, USA)
  • Chro Radha (Chro Ali Hamaradha) (Sulaimani Polytechnic University, Technical College of Engineering, Department of City Planning, Kurdistan Region, Iraq)
  • Maurizio Repetto (Department of Energy “Galileo Ferraris”, Politecnico di Torino, Italy)
  • Zoltán Sári (Department of Technical Informatics, Institute of Information and Electrical Technology, Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Grzegorz Sierpiński (Department of Transport Systems and Traffic Engineering, Faculty of Transport, Silesian University of Technology, Katowice, Poland)
  • Zoltán Siménfalvi (Institute of Energy and Chemical Machinery, Faculty of Mechanical Engineering and Informatics, University of Miskolc, Hungary)
  • Andrej Šoltész (Department of Hydrology, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Slovakia)
  • Zsolt Szabó (Faculty of Information Technology and Bionics, Pázmány Péter Catholic University, Hungary)
  • Mykola Sysyn (Chair of Planning and Design of Railway Infrastructure, Institute of Railway Systems and Public Transport, Technical University of Dresden, Germany)
  • András Timár (Faculty of Engineering and Information Technology, University of Pécs, Hungary)
  • Barry H. V. Topping (Heriot-Watt University, UK, Faculty of Engineering and Information Technology, University of Pécs, Hungary)

POLLACK PERIODICA
Pollack Mihály Faculty of Engineering
Institute: University of Pécs
Address: Boszorkány utca 2. H–7624 Pécs, Hungary
Phone/Fax: (36 72) 503 650

E-mail: peter.ivanyi@mik.pte.hu 

or amalia.ivanyi@mik.pte.hu

Indexing and Abstracting Services:

  • SCOPUS
  • CABELLS Journalytics

 

2022  
Web of Science  
Total Cites
WoS
not indexed
Journal Impact Factor not indexed
Rank by Impact Factor

not indexed

Impact Factor
without
Journal Self Cites
not indexed
5 Year
Impact Factor
not indexed
Journal Citation Indicator not indexed
Rank by Journal Citation Indicator

not indexed

Scimago  
Scimago
H-index
14
Scimago
Journal Rank
0.298
Scimago Quartile Score

Civil and Structural Engineering (Q3)
Computer Science Applications (Q3)
Materials Science (miscellaneous) (Q3)
Modeling and Simulation (Q3)
Software (Q3)

Scopus  
Scopus
Cite Score
1.4
Scopus
CIte Score Rank
Civil and Structural Engineering 256/350 (27th PCTL)
Modeling and Simulation 244/316 (22nd PCTL)
General Materials Science 351/453 (22nd PCTL)
Computer Science Applications 616/792 (22nd PCTL)
Software 344/404 (14th PCTL)
Scopus
SNIP
0.861

2021  
Web of Science  
Total Cites
WoS
not indexed
Journal Impact Factor not indexed
Rank by Impact Factor

not indexed

Impact Factor
without
Journal Self Cites
not indexed
5 Year
Impact Factor
not indexed
Journal Citation Indicator not indexed
Rank by Journal Citation Indicator

not indexed

Scimago  
Scimago
H-index
12
Scimago
Journal Rank
0,26
Scimago Quartile Score Civil and Structural Engineering (Q3)
Materials Science (miscellaneous) (Q3)
Computer Science Applications (Q4)
Modeling and Simulation (Q4)
Software (Q4)
Scopus  
Scopus
Cite Score
1,5
Scopus
CIte Score Rank
Civil and Structural Engineering 232/326 (Q3)
Computer Science Applications 536/747 (Q3)
General Materials Science 329/455 (Q3)
Modeling and Simulation 228/303 (Q4)
Software 326/398 (Q4)
Scopus
SNIP
0,613

2020  
Scimago
H-index
11
Scimago
Journal Rank
0,257
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
340/243=1,4
Scopus
Cite Score Rank
Civil and Structural Engineering 219/318 (Q3)
Computer Science Applications 487/693 (Q3)
General Materials Science 316/455 (Q3)
Modeling and Simulation 217/290 (Q4)
Software 307/389 (Q4)
Scopus
SNIP
1,09
Scopus
Cites
321
Scopus
Documents
67
Days from submission to acceptance 136
Days from acceptance to publication 239
Acceptance
Rate
48%

 

2019  
Scimago
H-index
10
Scimago
Journal Rank
0,262
Scimago
Quartile Score
Civil and Structural Engineering Q3
Computer Science Applications Q3
Materials Science (miscellaneous) Q3
Modeling and Simulation Q3
Software Q3
Scopus
Cite Score
269/220=1,2
Scopus
Cite Score Rank
Civil and Structural Engineering 206/310 (Q3)
Computer Science Applications 445/636 (Q3)
General Materials Science 295/460 (Q3)
Modeling and Simulation 212/274 (Q4)
Software 304/373 (Q4)
Scopus
SNIP
0,933
Scopus
Cites
290
Scopus
Documents
68
Acceptance
Rate
67%

 

Pollack Periodica
Publication Model Hybrid
Submission Fee none
Article Processing Charge 900 EUR/article
Printed Color Illustrations 40 EUR (or 10 000 HUF) + VAT / piece
Regional discounts on country of the funding agency World Bank Lower-middle-income economies: 50%
World Bank Low-income economies: 100%
Further Discounts Editorial Board / Advisory Board members: 50%
Corresponding authors, affiliated to an EISZ member institution subscribing to the journal package of Akadémiai Kiadó: 100%
Subscription fee 2023 Online subsscription: 336 EUR / 411 USD
Print + online subscription: 405 EUR / 492 USD
Subscription Information Online subscribers are entitled access to all back issues published by Akadémiai Kiadó for each title for the duration of the subscription, as well as Online First content for the subscribed content.
Purchase per Title Individual articles are sold on the displayed price.

 

Pollack Periodica
Language English
Size A4
Year of
Foundation
2006
Volumes
per Year
1
Issues
per Year
3
Founder Akadémiai Kiadó
Founder's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Publisher Akadémiai Kiadó
Publisher's
Address
H-1117 Budapest, Hungary 1516 Budapest, PO Box 245.
Responsible
Publisher
Chief Executive Officer, Akadémiai Kiadó
ISSN 1788-1994 (Print)
ISSN 1788-3911 (Online)

Monthly Content Usage

Abstract Views Full Text Views PDF Downloads
Nov 2023 0 0 0
Dec 2023 0 0 0
Jan 2024 0 0 0
Feb 2024 74 4 5
Mar 2024 94 0 0
Apr 2024 187 0 0
May 2024 0 0 0