This study examines the impact of various external shading devices on key lighting metrics, such as spatial daylight autonomy, annual sunlight exposure, and mean illuminance in classrooms. By comparing the performance of different shading options, the study offers insights into optimizing natural lighting, enhancing visual comfort, and improving sustainability in educational buildings in warm, humid climates. The findings provide valuable guidance for architects, designers, and school facility managers aiming to improve energy efficiency and occupant comfort in educational environments.
F. Abanda and L. Bayers, “An investigation of the impact of building orientation on energy consumption in a domestic building using emerging BIM (Building Information Modelling),” Energy, vol. 97, pp. 517–527, 2016.
A. Aldawoud, “Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate,” Energy Build., vol. 59, pp. 104–110, 2013.
S. O. Elshiwihy and H. N. Chaudhry, “Parametric study on determining optimum shading techniques for urban high-rise dwellings,” Urban Sci., vol. 3, no. 3, 2019, Art no. 85.
S. Li, L. Liu, and C. Peng, “A review of performance-oriented architectural design and optimization in the context of sustainability: Dividends and challenges,” Sustainability, vol. 12, no. 4, 2020, Art no. 1427.
O. Onazi, E. Gaiya, E. Ola-Adisa, and D. Yilme, “An appraisal of shading devices in institutional buildings,” J. Phys. Sci. Innov., vol. 10, no. 2, pp. 17–30, 2018.
T. Maile, M. Fischer, and V. Bazjanac, “Building energy performance simulation tools – a life-cycle and interoperable perspective,” Technical paper no. WP-107, Center for Integrated Facility Engineering Stanford University, pp. 1–49, 2007.
J. Sousa, “Energy simulation software for buildings: Review and comparison,” in International Workshop on Information Technology for Energy Applicatons-IT4Energy. Spain: Lisabon, 2014, pp. 1–12.
B. Naili, I. Háber, and I. Kistelegdi, “Façade typology development in high-rise office building envelope,” Pollack Period., vol. 18, no. 2, pp. 151–156, 2023.
G. Tsovoodavaa and I. Kistelegdi, “Comparative analysis for traditional yurts using thermal dynamic simulations in Mongolian climate,” Pollack Period., vol. 14, no. 2, pp. 97–108, 2019.
J. Mardaljevic, M. Andersen, N. Roy, and J. Christoffersen, Daylighting, Artificial Lighting and Non-visual Effects Study for a Residential Building. UK: Loughborough, 2012.
R. G. Hopkins, Lighting: Architectural Physics, Praeger, 1969.
Chartered Institution of Building Services Engineers. Chartered Institute of Building Services Engineers 1997.
G. Evola, F. Gullo, and L. Marletta, “The role of shading devices to improve thermal and visual comfort in existing glazed buildings,” Energy Proced., vol. 134, pp. 346–355, 2017.
A. Hashemi and N. Khatami, “Effects of solar shading on thermal comfort in low-income tropical housing,” Energy Proced., vol. 111, pp. 235–244, 2017.
A. Kirimtat, B. K. Koyunbaba, I. Chatzikonstantinou, and S. Sariyildiz, “Review of simulation modeling for shading devices in buildings,” Renew. Sustain. Energy Rev., vol. 53, pp. 23–49, 2016.
S. H. Kim, K. J. Shin, B. E. Choi, J. H. Jo, S. Cho, and Y. H. Cho, “A study on the variation of heating and cooling load according to the use of horizontal shading and venetian blinds in office buildings in Korea,” Energies, vol. 8, pp. 1487–1504, 2015.
D. S. Lee, J. H. Jo, S. H. Koo, and B. Y. Lee, “Development of climate indices using local weather data for shading design,” Sustainability, vol. 7, no. 2, pp. 1884–1899, 2015.
M. Kim, S. B. Leigh, T. Kim, and S. Cho, “A study on external shading devices for reducing cooling loads and improving daylighting in office buildings,” J. Asian Archit. Building Eng., vol. 14, no. 3, pp. 687–694, 2015.
R. Singh, I. J. Lazarus, and V. V. N. Kishore, “Effect of internal woven roller shade and glazing on the energy and daylighting performances of an office building in the cold climate of Shillong,” Appl. Energy, vol. 159, pp. 317–333, 2015.
Y. Huang, J. L. Niu, and T. M. Chung, “Comprehensive analysis on thermal and daylighting performance of glazing and shading designs on office building envelope in cooling-dominant climates,” Appl. Energy, vol. 134, pp. 215–228, 2014.
A. Atzeri, F. Cappelletti, and A. Gasparella, “Internal versus external shading devices performance in office buildings,” Energy Proced., vol. 45, pp. 463–472, 2014.
J. Choi, T. Lee, E. Ahn, and G. Piao, “Parametric louver design system based on direct solar radiation control performance,” J. Asian Archit. Build. Eng., vol. 13, no. 1, pp. 57–62, 2014.
S. Grynning, B. Time, and B. Matusiak, “Solar shading control strategies in cold climates–Heating, cooling demand and daylight availability in office spaces,” Solar Energy, vol. 107, pp. 182–194, 2014.
J. A. Kim and S. H. Yoon, “A study on exterior horizontal louvers of office space to reduce heating, cooling and lighting loads,” J. Archit. Inst. Korea Plann. Des., vol. 28, no. 10, pp. 345–352, 2012.
A. Ebrahimpour and M. Maerefat, “Application of advanced glazing and overhangs in residential buildings,” Energy Convers. Manage., vol. 52, no. 1, pp. 212–219, 2011.
A. I. Palmero-Marrero and A. C. Oliveira, “Effect of louver shading devices on building energy requirements,” Appl. Eergy, vol. 87, no. 6, pp. 2040–2049, 2010.
D. Kim, G. Yun, K. Yoon, S. Kim, and K. Kim, “A study for cooling o heating load reduction in office space with the change of overhangs length and shading coefficient,” J. Korean Inst. Archit. Sustain. Environ. Build. Syst., vol. 4, no. 3, pp. 127–134, 2010.
M. H. Kim and S. J. Suh, “A study on design of movable horizontal shading device for office building,” J. Korean Solar Energy Soc., vol. 28, no. 2, pp. 50–57, 2008.
A. Tzempelikos and A. K. Athienitis, “The impact of shading design and control on building cooling and lighting demand,” Solar Energy, vol. 81, no. 3, pp. 369–382, 2007.
J. M. Park and S. H. Park, “An evaluation of external shading device installed on the office building in low latitude,” J. Archit. Inst. Korea Plann. Des., vol. 29, no. 2, pp. 235–242, 2013.
S. Hong, A. Choi, and M. Sung, “Impact of bi-directional PV blind control method on lighting, heating and cooling energy consumption in mock-up rooms,” Energy Build., vol. 176, pp. 1–16, 2018.