Browse
Abstract
In a result of the increase in impervious surfaces in the urbanized area, there is an increase in surface runoff and at the same time an overload of the sewage network. In order to reduce the mentioned negative impacts in the inner city of Bratislava, this study was developed. The aim of this study was to design as possible the most efficient possible infiltration device for capturing rainwater and keeping it at the point of impact of precipitation of the addressed site. The Novohradska Grammar School campus was chosen as the area of interest. It is assumed that, together with elements of green infrastructure, these measures will be able to contribute in order to mitigate the adverse effects of urbanization in the capital.
Abstract
The inorganic scaling in wells is a common problem faced by mining companies. At present, the use of protective coatings for tubing as a measure to prevent or reduce the formation of inorganic scale deposits on pipe walls has not been fully studied. To use protective coatings as a measure to counteract the deposition of inorganic salts, it is necessary to develop a method that allows assessing the ability of coatings, as well as polymer and metal materials, to prevent the formation of inorganic scale deposits on the inner surface of pipes.
The article proposes a method for assessing the ability of protective coatings to resist the inorganic scaling on the inner surface of tubing. The proposed assessment method allows to make an informed decision on the advisability of using internal protective coatings of tubing to prevent (or reduce) the formation of inorganic scale deposits. The authors consider design features of a test bench for assessing the resistance of coatings to inorganic scale deposits, which allows to simulate the conditions for the formation of scale deposits that are as close as possible to the real conditions of oil production facilities. The article presents the results of bench tests of nine coating samples, two polymer samples and one sample made of St 40G2 steel. To assess the effectiveness of using tubing with an internal anti-corrosion coating as a measure to combat scale deposits, additional research is required to assess the possibility of complex use of coatings in conjunction with other methods of preventing processes of inorganic scaling. Thus, the authors developed the Bench for assessing the resistance of protective coatings of tubing to inorganic scale deposits. A dynamic testing technique is proposed to evaluate the resistance of protective coatings to inorganic scale deposits. Based on the presented results, conclusions were drawn about the possibility of using protective coatings on tubing as a measure to prevent the formation of inorganic scale deposits on the inner surface of the tubing.
Abstract
The work focuses in architectural dimension of urban form, by confronting the plans of three neighborhoods in Prishtina that represent potentially three main urban paradigms of the last decades in city's urban transformation. The study aims to unfold the main elements, confront them, and expose to possible transformation. The work progressively decomposes each case into basic components and deductively to their minimal unit.
The research, through interpretation and graphic illustrations, analyzes the three plans by layers: basic elements and their relational modalities, urban matrix, open space character and composing minimal units. The process will identify the main components, and their generic potentiality to be considered as future inputs in city's development.
Abstract
Even though concrete structures are safer than steel structures in terms of fire resistance, the risk exists in concrete structures by spalling or exploding, especially in high-strength concrete. This study aims to produce a particular type of concrete using waste ceramics as fine aggregate and waste glass as coarse aggregate and compare data with normal aggregate concrete. Studies show that using waste ceramic and glass increases the fire resistance of concrete. After fire exposure in the control mix, the residual compressive strength was 10 MPa. The waste aggregate concrete was found to be 26.9 MPa after 800 centigrade exposures, which was an excellent result. Waste materials decreased construction costs and led to a clean environment.
Abstract
Manufacturing ceramic green structures using starch consolidation casting is an established process that is simple, non-hazard, and low-cost. In this study, starch consolidation casting is used to prepare ceramics based on submicron monoclinic zirconia with additions of alumina and magnesia. Scanning electron microscopy results indicate that the size of pores decreased and the morphological irregularity increased when the tapioca starch content increased. The sample with 30 wt.% tapioca starch in a 55 wt.% slurry concentration had the highest estimated apparent porosity (around 56%), whereas the sample with 10 wt.% in a 68 wt.% suspension concentration had the lowest (about 35%).
Abstract
In the ever-changing realm of the contemporary workplace, adaptability and flexibility have emerged as crucial attributes for office buildings. The method of axes system design, in conjunction with modular structures, fosters a workspace that can seamlessly adapt to the evolving needs of offices. This system embodies a comprehensive approach to office design, emphasizing the integration of four important principles: modularity, adaptability, interconnectedness, and flexibility. The modular nature of the structural axes design allows for swift and cost-effective adjustments, facilitating customer needs. The dynamism of this system ensures that office spaces are in a perpetual state of evolution, reflecting the changing dynamics of the contemporary workplace as to be shown in this paper.
Abstract
Plastic pollution of oceans and seas is increasing every year and coastal countries need to pay particular attention to this problem. Four Asian countries – Japan, China, Singapore, South Korea – were analysed in terms of the amount of waste and plastic waste generated and their recycling rates. For each country, available data were collected and converted into a common unit of measurement – metric tonnes per 1,000 people. The countries' performance to date was analysed and used as a basis for projections for 2030. Based on the trends so far, Japan has seen an 11% reduction in plastics waste and a 6% reduction in waste over the period, while China has seen a 27% increase in waste and an 8% reduction in plastic waste. In South Korea, plastic waste increased by 49% and waste by 21%. In Singapore, waste decreased by 13% and plastic waste increased by 15%. On current trends, none of the countries are projected to reach their 2030 targets. However, by complying with current and newly introduced regulations, they have a chance to move closer to their targets.
Abstract
Thermomechanical treatments and variations in chemical composition during the production of these alloys allow their properties to be adjusted as necessary. In the present research, the influence of chemical modification was analyzed by adding a combination of two rare earth elements (lanthanum and cerium) and performing a pretreatment before natural and artificial aging. With this, it was observed that said chemical modification led to an increase in hardness after artificial aging and specific suppression of the hardening speed at room temperature, combined with a pretreatment process to improve the density of the nucleation site and take advantage of the possible vacancy capture effect. Furthermore, microstructural changes were observed in the study alloys by scanning electron microscopy. The above allows the design of alloy production processes according to the requirements of each application.
