Building Information Modelling (BIM) involves management efforts, tools and applications for enhancing information flow and, therefore, productivity of projects; adoption of BIM and the increasing use of digital technologies (e.g. data centers) in construction and operation of buildings, as well as in maintenance can transform the way how the industry works. Telecommunication cabinets equipped with large number of components of different types are inevitable parts of data centers having a significant influence on the efficiency and the reliability of data centers. Since the layout of equipment inside telecommunication cabinets is crucial in data centers and the ideal location of equipment inside each cabinet can be unique, an algorithmic and automated process is necessary for the cabinet façade scheme design; manually created diagrams can lead to errors. Furthermore, precise and up-to-date pieces of information about the special layout of equipment in each cabinet are also important for the further operation and maintenance. As an answer to this challenge, a BIM-based approach and method are presented in this article that can result in significant cost savings. When designing data centers, special attention must be paid to the location of telecommunication cabinets, the design of cable routes, and the layout of equipment inside. The novel cabinet family for BIM technology-based method has been developed for the improvement of data center design. Cable trays plug-in can lead to higher quality and efficiency of construction and the facility management as well.
The main goal of the case study: optimization of the design process of structured cabling systems (SCS) in data centers (DC) using new additional BIM capabilities.
The novel dynamic cabinet family have several distinctive features:
the ability to select in the properties which equipment will be inside the cabinet and which unit will occupy;
possibility to change and add equipment inside the cabinet;
creation of cabinet façade scheme based on equipment inside the cabinet;
automatically created specification;
Cable tray plug-in can improve and automate the design process in the following areas:
place trays depending on the installation method (wall, floor, ceiling);
place elements of the trays (hangers, consoles, racks) in a user-defined interval;
place tray connectors based on selected connector type and tray type at user-selectable spacing;
adding a tray cover and a partition in the tray properties;
automatically created specification of all cable trays elements.
The model created in BIM can be used for further operation and maintenance. To reach it, each of the elements or groups of elements contains a unique number that allows to bind its parameters and geometry for further export and use in the production model.
The aim of this study is the manufacturing analysis of five spur gear pairs where the initial geometric parameters are the same only the pressure angle is different. Firstly, the gears must be designed and modelled. After that, I analyse the modification of this geometric parameter for the manufacturing parameters of the pinion and the gear in the case of gear cutting by module disc milling cutter. Using this technology the one tooth cutting can repeat from tooth to tooth in the function of the number of teeth. I would like to find correlations between the pressure angle and the manufacturing parameters. For this purpose, I define the initial technological parameters and calculate necessary technological parameters for the manufacturing process in a general way. I also define the manufacturing parameters for the given gear geometries. This analysis is practical and theoretical at the same time since the results and the process can help the manufacturing engineers to develop the gear manufacturing processes and applying my results for similar manufacturing problems.
The study presents a mathematical model for building heating control. The buildings are connected to district heating or to central heating. The task of the heating control is to maintain a preset constant indoor air temperature. Control disturbance is caused by external meteorological conditions, firstly by outdoor air temperature. The control action can be the change in heat transfer capacity of the radiators, whereby the indoor air temperature can be commanded back to the present value to offset the effect of the disturbance. Just the control can be a follower or of predictive type. The expected indoor air temperature can be calculated from the energy balances. These are composed of differential equations, describing dynamic equilibrium of heat transfer through the external walls, as well as heat storage in the walls and indoor air. Type of differential equations is linear, inhomogeneous, of first or second order.
Solution of the differential equation results in describing the change in indoor air temperature in time as a function of outdoor air temperature. Further on, the equation determines the function of the necessary heating capacity to keep the indoor air temperature constant. By the model several heating programs can be evaluated. The physical model is shown in Fig. 1. Intermediate variable is the average temperature of the external walls. Heat conduction and convection through the walls is calculated by the difference of the indoor air temperature and of the average wall temperature by using relevant R1 and R2 heat resistance factors. The model is adequate when the heat transport within the building sections is neglectable, and the thermodynamic and heat transfer characteristics of the walls are identical. Thereby the model describes the heat balance of representative premises, but the results can be transferred to similar other premises, too.
The biggest question of professional sports is how to compete successfully in the global economic framework, simultaneously in terms of the sport and in economic terms. As a result, in addition to indicators measuring sports-related effectiveness, the need for an economic analysis of sport has also emerged. Most academic research into the economic aspects of sports are related to the analysis of North American major league sports, as well as to European football. Water polo is also a spectator team sport, yet its economic analysis is almost entirely missing. In this article, we present an economic analysis of the operation of five men’s water polo teams – the top four teams in terms of the sports results and one from the mid-range – competing in the highest-level national championship in Hungary. Our aim is to determine, on the basis of the analysis of the data, the relationship between effectiveness in sports and the economic background of the teams.
It can undoubtedly be concluded that, in addition to appropriate professional decisions, it is the economic situation of a club that has a clear impact on their effectiveness; in other words, up to a certain point, the more disposable funds and wider range of assets a sports company has, the more effectively it can prepare and the better results it will have in the various domestic and international championships and tournaments. CIT (corporate income tax benefits, “TAO” in Hungarian) support is fundamentally important in the field of youth sports development. While professional sports in Hungary are built on the development of junior players, there is still no clear link between the successfulness of the adult and the junior teams. The first-division teams of the clubs providing the best junior players are frequently in the mid-range or occasionally among the weakest teams in the national championship.
Our research has shown that apart from the fact that some teams are extremely successful in the water polo championship, the outcome of many matches becomes quite predictable. Based on these, the uncertainty of the outcome is compromised, and the championship becomes less exciting and also loses some of its audience.
High performance concrete is extensively used for construction works in recent era. For the preparation of high performance concrete (HPC) mineral and chemical admixtures are used. The addition of mineral admixtures minimizes the utilization of cement and makes concrete more sustainable. The addition of metakaolin as a substitute to cement enhances the properties of concrete. There is need to study the mechanical and micro-structural properties of concrete containing metakaolin as cementitious material. In this work an endeavour has been made to study the properties of HPC employing matakaolin as an alternative for cement. The cement has been replaced with metakaolin by 5%, 10%, 15%, 20%, and 25% respectively for 0.25, 0.3, and 0.35 w/c ratios. The strength and electrical resistivity tests are conducted for all concrete mixes on triplicate. Results confirm that the accumulation of metakaolin increases the properties of HPC. A maximum of 49% increase in compressive strength in concrete was observed by the accumulation of 15% of metakaolin in concrete as substitute to cement for 0.25 w/c ratio in comparison to standard concrete. The development of secondary calcium silicate hydrates and minimal Ca(OH)2 components was revealed by X-ray spectroscopy, indicating that the concrete was denser. The results of this study revealed that metakaolin has a considerable impact on high-performance concrete, particularly in terms of compressive and flexural strength.
Shape memory alloys are smart materials which have remarkable properties that promoted their use in a large variety of innovative applications. In this work, the shape memory effect and superelastic behavior of nickel-titanium helical spring was studied based on the finite element method. The three-dimensional constitutive model proposed by Auricchio has been used through the built-in library of ANSYS® Workbench 2020 R2 to simulate the superelastic effect and one-way shape memory effect which are exhibited by nickel-titanium alloy. Considering the first effect, the associated force-displacement curves were calculated as function of displacement amplitude. The influence of changing isothermal body temperature on the loading-unloading hysteretic response was studied. Convergence of the numerical model was assessed by comparison with experimental data taken from the literature. For the second effect, force-displacement curves that are associated to a complete one-way thermomechanical cycle were evaluated for different configurations of helical springs. Explicit correlations that can be applied for the purpose of helical spring's design were derived.
Composite materials are granted first choice in the present manufacturing scenario due to their compatibility with tolerances up to 0.001 mm and lower weight. The research design works on the composites of the metal matrix, which are used primarily for aeronautical and industrial applications. Metal matrix composites are being used extensively in structural engineering. Silicon carbide and fly shell ash were used as compliance in aluminium alloys for the manufacture of metal matrix composites (LM13). The composite metal matrix is created employing Stir Casting method. When compared to open moulding, closed moulding, and cast polymer moulding, it is a less expensive and more effective method. The composites produced were then examined for mechanical properties, from the results it was found that the presence of ash and ceramic grains can adversely impact the properties of the composites and even make them brittle. It is time to change the mechanical properties of aluminium by creating hybrid composites with double and often triple-reinforced sections. Hybrid composites have greater performance, better tolerance to tear, low density, resistance to corrosion and strong rigidity over metal matrix composites. In this research an Al-Sic-fly ash composite is proposed and the mechanical properties of hardness, tensile strength, corrosion strength, micro structure analysis are investigated.
The aim of the thesis is the geometric design, CAD modelling and TCA of spur gear pairs having normal teeth based on the modification of the pressure angle. The first task is the geometric design and CAD modelling of the gear pairs (5 pairs are designed) where only the pressure angle is modified beside the constancy of the other initial parameters. The second task is to analyse the comparison possibility and the accuracy similarity of the 2D and the 3D models by the Hertz (equivalent) stress analysis. Finally, I give analysis of the maximum equivalent stress, normal stress and contact pressure for each pair while three teeth are rolling down on each other.
The study is based on the re-combination or synthesis of international scientific literature, and the definition of the notions center, and sub-center. A conceptual-structural framework of socio-spatial characteristics of centers (and sub-centers) is set up, these factors are essential elements of making, maintaining, and rehabilitating a city: Market and Competition; Node and Pole; Faith; Power; Security; Mixture; and Identity. In an evaluation matrix, the meta-physical characteristics (that are the determining factors of the physical attributes) of these archetypes are drawn. Based on famous theorists, three types of city forms are distinguished: the “traditional / organic”, the “modern / planned”, and the “contemporary / disjointed” ones. We argue that the historical, theoretical-conceptual background of the triple division is comprehensible. However, this trichotomy lacks some essential elements, “measurable” aspects of city centers – outlined in our study –, which are important in contemporary urban processes and support more realistic urban planning.
Tanulmányunkban – nemzetközi szakirodalmi kutatás alapján – definiáljuk a központ és az alközpont fogalmakat. Meghatározzuk a központok (és az alközpontok) téri-társadalmi jellemzőinek konceptuális és strukturális keretrendszerét. Ezek az alkotóelemek – Piac és Verseny; Csomópont és Pólus; Hit; Hatalom; Biztonság; Vegyesség; Identitás – a város alapításának, fenntartásának és megújításának feltételei. Egy értékelő mátrix segítségével összegezzük ezen archetípusok metafizikai jellemzőit, és amellett érvelünk, hogy ezek determinálják a központok fizikai tulajdonságait. Elismert szerzőkre hivatkozva ismertetjük a legelfogadottabb városmodellek hármas felosztását: a hagyományos / organikus, a modern / tervezett és a kortárs / széttagolt tipológiát. Azt állítjuk, hogy a hármas felosztás történelmi, elméleti-konceptuális háttere megalapozott. Ugyanakkor ez a hármasság nem foglalja magában azokat a „mérhető” – a tanulmányban felvázolt – szempontokat, amelyek segítségével a valósághoz jobban közelítő, a tervezési gyakorlatban könnyebben alkalmazható központmodellek vázolhatók fel.