Browse

You are looking at 201 - 210 of 2,821 items for :

  • Architecture and Architectonics x
  • All content x
Clear All

Abstract:

This paper proposes the application of energy efficient, low tech (passive) building design strategies and concepts in an industrial facility case study, in order to create a building with high efficiency and comfort within the boundaries of a tight investment cost. The planning process is supported by dynamic thermal and daylight simulations. Two versions were considered, a conventional industry building and a low tech one with climate zone based space organization. According to the evaluation of thermal and visual comfort as well as energy demand the selected version with the innovative passive concept delivered considerably better performance. According to the constructor’s concept, the reference building had to be placed by minimal adaptation on the new site. After considering and calling this concept into question, a new ‘energy design’ concept was elaborated at the sketch planning level. The new concept was compared with the reference building and a quantified, simulation assisted evaluation was provided about the cases. Since there was an essential improvement in comfort and energy level and, in addition, at architectural standard, the constructor could have been convinced to accept the new concept.

Open access

Abstract:

Day-lighting studies in buildings play a major role in indoor environmental investigation and can be conducted at the early stages of building design. Window position significantly affects day-lighting performance. This paper assessed the impacts of the window position on the visual comfort through two main factors; daylight factor and light uniformity in the hot and dry climate zone. In this study different window positions have been examined to achieve optimal visual comfort, using a dynamic simulation through Vi-suit plugin for Blender 3D software that controls the external application Radiance software. The results revealed that the window position at sill start from 1.4 m of a room characterized by (4.30 m × 3.00 m × 3.00 m) is the best compromising solution that complies with the daylight factor and light uniformity standards in the indoor environment. The findings of this study provide a more detailed and comprehensive analysis of the window design for architects/designers in the early building design stages in the hot and dry climate region.

Open access

Abstract:

Moment resisting frames are considered as an effective seismic force resisting system that is used for steel structures. Some of these structures that were built in high seismic hazard zones were designed according to old strength-based design codes. Currently, these structures do not meet the requirements of the new seismic codes. Therefore, the seismic retrofit of these structures is mandatory and cannot be overlooked. Steel braces and concrete-steel composite elements are common solutions for enhancing the seismic behavior of existing steel frame structures. This paper presents a numerical study that evaluates different possible techniques for the seismic retrofit of existing steel moment-resisting frame structures. The study investigates the performance of three multi-story buildings with different heights that are located in a high seismic hazard zone. Three retrofit techniques were introduced including; 1) X-Steel braces, 2) buckling restrained composite braces, and 3) composite concrete-steel plate shear walls. The seismic performance enhancement of the studied structures was evaluated in terms of the structure’s fundamental period, maximum inter-story drift and maximum base shear-to-weight ratios. Moreover, the cost of retrofitting material was estimated for each technique and they were compared to select the retrofit technique with the least constitutive material cost.

Open access

Abstract:

In this study the detailed One-at-a-Time sensitivity analysis of nonlinear mass spring-damper systems is carried out with numerical simulation. The degree of sensitivity was measured with a sensitivity index and based on its sensitivity Fuzzy-sets were established. The sensitivity of a parameter then can be expressed by the membership to the Fuzzy-sets. In this study the root mean square of acceleration, the maximum amplitude of acceleration and the peak frequency were chosen as output variables to measure sensitivity. With this research it was proven, that the root mean square of acceleration and the peak frequency can be used for sensitivity study of nonlinear vibration systems effectively.

Open access
International Review of Applied Sciences and Engineering
Authors: Ahmed S. Al-Zuhairi, Alaa H. Altimimy, Ali T. Al-Aqbi, and Hazim M. Al-Kargole

Abstract

Growing ramification in WSN contemplations are not restricted to routing, construction of protocols, dynamic of mobile nodes and infrastructure of the network. Although transcended to geometric level demonstrated as computational and dynamical geometries in spite of graph theory. In this paper we present step forward recognition features of a network devoted to solve the problem of reconstructing the disconnected network by connecting any disconnected chains. It considers geometrical properties of random depletion nodes deviated from unit grid. Number of chains and number of nodes in each chain are calculated with the average number of connections to a total nodes and longest chain. Histogram represented number of chains and numbers of nodes for each chain are used to show fragmentation of the network. Algorithm included a method to translate adjacent matrix to chain matrix and vice versa to check the agreement of initial case with the results. The amount of chain deviation and average connections per node for longest connected chain and for the total network are drawn as bar charts and conduct interpretations.

Open access

Abstract

The main cause of train derailment is related to transverse defects that arise in the railhead. These consist typically of opened or internal flaws that develop generally in a plane that is orthogonal to the rail direction. Most of the actual inspection techniques of rails relay on eddy currents, electromagnetic induction, and ultrasounds. Ultrasounds based testing is performed according to the excitation-echo procedure []. It is conducted conventionally by using a contact excitation probe that rolls on the railhead or by a contact-less system using a laser as excitation and air-coupled acoustic sensors for wave reception. The ratio of false predictions either positive or negative is yet too high due to the low accuracy of the actual devices. The inspection rate is also late; new numerical method has been developed in this context: The semi-analytical finite element method SAFE. This method has been applied in the case of anisotropic media [], composite plates [] and media in contact with fluids []. This method has been used successfully for several structures and especially in the case of beams of any cross-section such as rails that are the subject of this work and we were interested in wave propagation in waveguides of any arbitrary cross-section in the case of beams or rails.

Open access

Abstract

Direct sequence spread spectrum (DSSS) communication systems offer huge performance focal points in perspective on their low probability of block, improved performance in multipath fading situations and their capacity to stay away from interference by spreading the signal over a wide bandwidth subsequently conveying the power. For the transmitted sequence to be effectively received and demodulated, the spreading sequence utilized at the receiver ought to be like that utilized in the transmitter. This paper uses MATLAB Simulink to show a technique for synchronizing the code clock at the receiver with the code clock at the transmitter. This fine arrangement procedure is known as code tracking.

Open access

Abstract

Due to the extensive development of high-speed railway lines which are operating at increasing velocities, the dynamic performance of railway bridges has become an important issue of scientific research. The aim of this study is to investigate the possibility of reducing the vertical acceleration and displacement of pre-stressed reinforced concrete bridges beams by using passive nonlinear viscoelastic dampers to retrofit them. The proposed solution is based on connecting the dampers directly to the abutments and the bottom surface of the bridge deck with an eccentricity between the neutral axis of the bridge and the contact point of the viscoelastic dampers. First, the dampers are modeled through the concept of linearized fractional derivatives to obtain energetic equivalent linear viscoelastic dampers. Optimization of the configuration of these dampers was performed then as function of the orientation angle and the eccentricity. Considering two bridges having different length that were studied in the literature with other systems of damping, it was found that the best orientation angle of dampers is close to 60°. It was found also that, in order to satisfy Eurocode 1 requirements, the total equivalent damping coefficient for the actual damping system is less than half of that required for systems using auxiliary beam to fix dampers, which indicates higher efficiency of the proposed solution.

Open access

Cells and building structures. Part I.

Cells – point-like, line-like and surface-like bodies – building structures

International Review of Applied Sciences and Engineering
Author: Géza Lámer

Abstract

The rooms of each building can be interpreted as three-dimensional cells. Borders (sides, edges) of rooms can be identified as the two-, one-, or zero-dimensional boundary cells of the three dimensional cell. The building structures identified as two-, one-, or zero-dimensional cells can be modeled by distinguished geometrical forms, surface-, line-, and point-like bodies. In accordance with the latter, building materials (finished products) can also be considered as surface-, line-, and point-like bodies.

The aim of the study is to create compliance between the cell elements and the building structures. It will be done at different levels:

  • – interpretation of relationship between building construction and cells,
  • – interpretation of relationship between building construction and selected bodies,
  • – interpretation the loadbearing's structure using cells,
  • – structure of the surface-construction and the cells,
  • – interpretation building types using cells.

In this paper (as part I) the first two items will be studied. The other three cases will be studied in another paper (as part II).

Open access