Browse

You are looking at 1 - 10 of 2,638 items for :

  • Architecture and Architectonics x
Clear All

Abstract:

Phosphorus is a major substance that is needed especially for agricultural production or for the industry. At the same time it is an important component of wastewater. At present, the waste management priority is recycling and this requirement is also transferred to wastewater treatment plants. Substances in wastewater can be recovered and utilized. In Europe (in Germany and Austria already legally binding), access to phosphorus-containing sewage treatment is changing. This paper dealt with the issue of phosphorus on the sewage treatment plant in Nitra. There are several industrial areas in Nitra where record major producers in phosphorus production in sewage. The new wastewater treatment plant is built as a mechanicalbiological wastewater treatment plant with simultaneous nitrification and denitrification, sludge regeneration, an anaerobic zone for biological phosphorus removal at the beginning of the process and chemical phosphorus precipitation. The sludge management is anaerobic sludge stabilization with heating and mechanical dewatering of stabilized sludge and gas management. The aim of the work was to document the phosphorus balance in all parts of the wastewater treatment plant - from the inflow of raw water to the outflow of purified water and the production of excess sludge. Balancing quantities in the wastewater treatment plant treatment processes provide information where efficient phosphorus recovery could be possible. The mean daily value of P tot is approximately 122.3 kg/day of these two sources. The mean daily value of P tot is approximately 122.3 kg/day of these two sources. There are also two outflows - drainage of cleaned water to the recipient - the river Nitra - 9.9 kg Ptot/day and Ptot content in sewage sludge - about 120.3 kg Ptot/day - total 130.2 kg Ptot/day.

Restricted access
Authors: Kristóf Roland Horváth and István Kistelegdi

Abstract:

First Hungarian Active House refurbishment won the Active House Award and the Energy Globe Hungary prize in 2017. This paper provides insight into the renewal design process of the typical home from the 70’s under disadvantageous site conditions. Dynamic thermal simulations helped to gain insight into space organization and building envelope concepts and their effects on comfort and energy performance. The Active House Standard was applied to evaluate the calculation results. The most advantageous concept was selected for final design elaboration and construction. The implemented building proved that in the refurbishment process it is possible to achieve highest level of efficiency in operation energy consumption with positive yearly balance by simultaneously being able to rearrange the complete interior space and as a consequence the building shape and envelope into a competitive design at international level.

Open access

Abstract:

During sketch design stage for the new block of the University of Pécs, Medical School comfort and lighting simulations were applied to quantify optimization strategies. Simulation cases about shading possibilities, façade glazing ratios and internal heat storage masses evaluate the impact of illumination, solar gains, loads and heat transmission on visual and thermal comfort. The goal was to select the most favorable comfort, coupled with maximum reduction of investment costs. Concepts represent 14% (shading), 10% (reduced wall-window ratio), 11% (slabs without suspended ceilings), and 17% (combined wall-window ratio and thermal mass) improvement in thermal comfort performance, and it was proposed for further design.

Open access

Abstract:

The aim of the research is to make a comparison between system integrated measurement technologies in the field of engineering education in order to the students getting more detailed knowledge about the high level problem solving. A comparative case study was conducted with 3 different types of systems, as follows: Beckhoff, National Instruments, and HBM. The criteria of the systems are determined based on experience and the importance level of them was calculated by preference matrix. The ranks of the alternatives are calculated by Kesselring method, which provides the effectiveness value of the systems compared to the benchmark. The result of the paper shows a suitable method for selecting engineering systems.

Open access

Abstract:

In wireless sensors networks, data are sensed and recorded as databases, and then acceded by relational queries. Joins are queries that are largely used. Joins collect data from several nodes’ table. These are operations that typically consume a lot of energy because they generate a large number of messages in the network. Researchers worked to decrease this consumed energy. Many strategies were proposed in this way, but most of them addressed only binary joins. N-way joins received few interests. N-way joins perform join operations between more than two tables. They cause greater energy consumption. Additionally, the number of execution order is very important; it grows exponentially with the number of considered tables.

Restricted access

Abstract

Regional flood frequency analysis is considered to be an important and popular method for estimating different hydrological variables at ungauged sites. The estimation of the index flood is the essential problem when this method is applied. The objective of the study is a comparison of the estimation of the mean annual flood (or index flood) by using two approaches based on the ‘so-called’ index flood method and top-kriging. The concept behind these methods permits estimating the mean annual flood at ungauged locations using information taken from gauged sites located within the same homogeneous pooling groups. The study area comprises 104 gauging stations on the whole territory of Slovakia. The observation period of the annual maximum discharges of the selected stations was from 1961-2010. The identification of the homogeneous pooling group was performed using a non-hierarchical k-means clustering algorithm. The optimal number of clusters is determined by the Silhouette method. As a result, eight homogeneous pooling group clusters were identified. Finally, the results of the estimated mean annual floods using the index flood method and top-kriging were compared with the observed data. Top-kriging provided better results than the classical index flood method for estimating the mean annual flood at ungauged sites.

Restricted access

Abstract:

This paper presents a design procedure of a switched-mode power converter, the well-known synchronous buck converter: the calculating method, and how to choose the parts of the converter are presented in detail, like the inductor, the capacitor and the semiconductors as well as the design of the state feedback. During the design process the efficiency and the high switching frequency are very important: the switching semiconductors are Gallium Nitride based. Then, a linear-quadratic regulator is designed and applied to the particular case of a buck converter.

Open access

Abstract:

Numerous volume rendering techniques are available to display 3D datasets on desktop computers and virtual reality devices. Recently the spreading of mobile and standalone virtual reality headsets has brought the need for volume visualization on these platforms too. However, the volume rendering techniques that show good performance in desktop environment underachieve on these devices, due to the special hardware conditions and visualization requirements. To speed up the volumetric rendering to an accessible level a hybrid technique is introduced, a mix of the ray casting and 3D texture mapping methods. This technique increases 2-4 times the frame rate of displaying volumetric data on mobile and standalone virtual reality headsets as compared to the original methods. The new technique was created primarily to display medical images but it is not limited only to this type of volumetric data.

Open access

Abstract:

A building physics supported development was undertaken for the new block of the University of Pécs, Medical School. During sketch design stage climate, lighting and energy simulations were applied to quantify energy optimization strategies. Simulation cases assess the impact of shading technologies, wall-window ratios and thermal masses on used thermal energy demand. Based on a previous study about visual and comfort performance, goal was to identify the highest energy efficiency rates with maximum investment cost savings. Besides best comfort results, the most optimal development represents 9% saving in used thermal energy, and they were proposed for further design.

Open access

Abstract:

Development of thermal efficiency of the concentrated solar energy especially parabolic trough collector using various nanofluids types has a taken high interest in recent years. In this article enhancement thermal performance inside the heating collecting element of trough collector type LS-2 was simulated and improved using nanofluid consist of Tungsten Oxide WO3 inserting in Syltherm 800. Nanofluid effect was examined by solving the energy balance equation using MATLAB Software to cover wide range concentration volume 1-5% and inlet temperatures ranging from 350-650 K for the turbulent flow. The heat transfer performance and thermal efficiency were improved based on the results, and a notable increase was obtained when volume concentration had been increased compared with base fluid.

Open access