Discover the Latest Journals in Architecture and Architectonics
Architecture is both the process and product of planning, designing, and constructing a building or structure, while architectonics is the scientific study of architecture itself. Architectural works are often considered important cultural symbols and works of art, and we often identify past civilizations with their architectural heritage.
Architecture and Architectonics
Abstract
Usage of single use plastics has been rapidly increasing in the recent past and it is challenging to dispose of these plastics safely, since they are non-biodegradable. Especially, Polyethylene Terephthalate (PET) which is widely used in the form of water bottles cannot be easily recycled or reused. On the other hand, construction projects require sustainable materials having good strength, accordingly various studies have been conducted to reuse plastic wastes in the concrete and positive results have been obtained. In this study, the crushed PET bottles are partially substituted with fine aggregates and water hyacinth is added as a bio plasticizer in concrete. The concrete specimens are cast by substituting PET aggregates with the fine aggregates at 2, 4, 6, 8, 10% and water hyacinth is added at 10 & 20% by weight of water. The specimens are tested and it is noted that with the addition of PET aggregates up to 4% the strength of the concrete increases and beyond 4%, strength of the concrete gradually decreases, and addition of water hyacinth enhances the strength of the concrete.
Abstract
In this paper, a novel hybrid technique is proposed for transient stability analysis on grid connected Wind-Diesel-PV hybrid system. The proposed hybrid methodology is combination of the dwarf mongoose optimization algorithm (DMO) and the recalling enhanced recurrent neural network (RERNN) named DMO-RERNN. The main purpose of this work is to consider various elements on hybrid system for the analysis of transient stability according to different conditions. The voltage profile of hybrid system is enhanced using the proposed unified power flow controller (UPFC), which also has higher performance improving transient performance compared to the conventional ANN, PI and fuzzy-sliding mode controller. Considering the proposed technique, DMO is used to find the optimal global solution for the fault predicted by the RERNN approach. The proposed system is executed on MATLAB work platform; its performance with existing systems is analyzed. The result proves that the proposed hybrid technique based UPFC controller provides better results compared with other existing technique. The efficiency of the PI is 82.136, ANN is 77, Fuzzy Sliding Mode is 65.097% and proposed technique is 97.99038%.
Abstract
The design of the envelope in high-rise office buildings is a task of great importance as it can impact the entire building's energy performance. The study presented in this paper is an extension of a previous work reporting on the optimization of the façade and the shading systems of an east-west facing high-rise office building. This study aims to investigate the façade geometry design factors for other potential orientations, e.g., south, south-east, and south-west directions. The IDA ICE 4.8 complex dynamic building energy simulation program was used to assess thermal and lighting simulations. The optimization results revealed the best-performing façade configurations, appropriate for each orientation examined in terms of thermal comfort, visual comfort, and energy consumption.
Abstract
The pylon is an essential part of lower limb prosthetics. It is usually made of titanium, aluminum, and steel. However, it is expensive and difficult to be available in developing countries, especially for children who suffer from amputation. Moreover, they constantly need new pylon pieces during close periods due to the growth and increase in the child's length.
Purpose
This study aims to design an adjustable pylon that can change in length to suit the increase in the length of the healthy leg of the child without the need for a new pylon and reduce the economic cost.
Design/methodology/approach
In this study, an adjustable pylon model was designed using the CAD software (Solid work) and work to manufacture the pylon from low-cost materials (carbon fiber filament) capable of bearing the amputee's weight, and manufacturing printed parts by using additive manufacturing technical (CREALITY CR20 3D printer).
Findings
The results showed that the pylon is successful in design and strength as it bears the patient's weight without any failure or buckling, and the proof that the maximum amount of stress generated is 27.8 MPa, which is far from the value of the yield stress.
Originality/value
The design of the adjustable pylon prototype offers good strength and ability to bear the patient weight, reducing the cost and time of manufacturing.
Abstract
Prying force formation at bolts is considered as an important problem in steel connection design. It affects the connection bearing capacity, ductility and serviceability negatively by increasing stresses induced inside connections. In the present work, behavior of steel connection under prying force is studied. A connection of steel beam-column has been modeled using software Revit program. Tension load is applied increasingly and the connection displacement has been measured until failure. Finite element simulation of steel angles under the effect of tension load and prying force has been studied. It is found that the connection has three phases of bearing behavior. Plastic hinge formation noticed increased with prying force presence.
Abstract
The common feature of streams in steep sloping watersheds is that there is a significant change from base-flow to flash-flood; sometimes two or three orders of magnitude. In Hungary, these streams are usually ungauged, with lack of available data, and models. The watershed features both urban and natural land use conditions, but the main area is quite homogenic.
This paper evaluates the impact of different model parameterizations, and rainfall duration on flash-flood events in the Morgó-creek watershed. The goal is to find the main parameters that can represent the uncertainty of a flash-flood sensitive area, and how the calibrated and determined parameters take effect on a model if these values are shifted on given intervals.
Abstract
Nowadays, the use of plastic is very widespread, especially in packaging materials. Most packaging materials are made from fossil-based polymers, which contribute significantly to greenhouse gas emissions. The unprecedented leakage of single-use plastic waste into the environment is a major problem, with negative impacts on both ecosystems and human health. In this study we examine the development of packaging waste and recycled packaging in the European Union over a period of more than 20 years, highlighting changes in the regulatory context; assess the achievements of Hungary so far and forecast the expected developing of packaging volumes and recycling rates; and consider recycling and waste reduction options, including alternative sustainable packaging options. Our forecast based on the evidence shows that Hungary (47.62%), Germany (61.46%), Malta (26.27%), Romania (58.64%) and Croatia (49.41%) are not expected to reach the target set (65% by 2025) in EU legislation. Out of the 27 countries surveyed, 6 (Belgium 88.2%, the Netherlands 87.81%, Luxembourg 76.96%, the Czech Republic 77.79%, Finland 78.75% and Denmark 83.7%) exceeded the expectations, so we show their waste management and waste recycling good practice, as they can serve as good examples for Hungary and other countries.
Abstract
In this paper, a comprehensive statistics-based review of islanding detection methods (IDMs) in microgrids (MGs) is presented. Islanding detection is the situation of isolating the MG from the main grid whether programmed as a result of load managing purposes or un-programmed due to the occurrence of faults. Islanding detection is a vital issue in MG's analyses due to the prevention of subsequent protection problems in the power system. In other words, when the MG's operation mode changes, the current passing through the protective devices changes subsequently and the protection system should be able to adapt the new settings to the protective devices. So, IDMs are vital for electrical engineers to overcome the abovementioned protection issue. This review paper surveys the existing literature in IDMs by concentration on total publications, type of publications (journal, conference paper, or book), five authors with the highest number of publications (including the affiliations), and five most published sources. Also, the five most cited publications and state-of-the-art IDMs are investigated in detail, utilizing some known and novel categorizations. This paper will be useful for the MG's researchers to know the most desirable IDMs, especially in recent years, and provides an insightful overview for future studies.
Abstract
The technical and economic effects of the two methods of retrofitting with buckling restrain bracing and using concrete shear wall were investigated. The results of this study showed that using reinforcement, the amount of target displacement in the models was significantly reduced and it was observed that the concrete shear wall had a greater impact on the structure in this regard. The reinforcement methods used in this research have a significant impact on improving the technical performance of structures, which has been more in the strengthening method with concrete shear wall. Also, the evaluations showed that despite the fact that the shear wall of reinforced concrete has a better effect on the performance of the structure from a technical point of view, but in terms of weight, it can be seen that using a buckling brace can be more economical.
Abstract
This study revealed the system of a lower limb exoskeleton created for knee rehabilitation. The exoskeleton has been extensively used in rehabilitation robotic device research, but its practical applicability is limited due to its high nonlinearity and uncertain behavior. As a result, the control technique is critical in increasing the efficacy of rehabilitation devices. For the rehabilitation and help of a patient with a lower-limb condition, a sliding mode control (SMC) with proportional derivative (PD) control approach are used as parallel loops. Active disturbances rejection control (ADRC) is used by these controllers to cancel any external influences. To overcome the degradation of disturbance rejection and robustness caused by a failure to fully adjust for the entire disturbance, a (SMC) loop was introduced to the control regulation. By assessing performance indices related to the estimated inaccuracy, the results demonstrate the effectiveness of the suggested controller. Simulink is used for simulation and analysis.