Search Results

You are looking at 11 - 20 of 33 items for

  • Author or Editor: L. Tan x
  • Refine by Access: All Content x
Clear All Modify Search

Abstract  

The molar heat capacity C p,m of 1,2-cyclohexane dicarboxylic anhydride was measured in the temperature range from T=80 to 390 K with a small sample automated adiabatic calorimeter. The melting point T m, the molar enthalpy Δfus H m and the entropy Δfus S m of fusion for the compound were determined to be 303.80 K, 14.71 kJ mol−1 and 48.43 J K−1 mol−1, respectively. The thermodynamic functions [H T-H 273.15] and [S T-S 273.15] were derived in the temperature range from T=80 to 385 K with temperature interval of 5 K. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetry (TG), when the process of the mass-loss was due to the evaporation, instead of its thermal decomposition.

Restricted access

This study was to examine the effects of four fungal polysaccharides, namely exo-polysaccharide (EPS), water-extracted mycelia polysaccharide (WPS), sodium hydroxideextracted mycelia polysaccharide (SPS), and hydrochloric-extracted mycelia polysaccharide (APS) obtained from the endophytic fungus Bionectra pityrodes Fat6, on the sprout growth and flavonoids production of Fagopyrum tataricum. Without obvious changes in the appearance of the sprouts, the exogenous polysaccharide elicitors notably stimulated the sprout growth and functional metabolites accumulation, and the stimulation effect was mainly depended on the polysaccharide species along with its treatment dose. With application of 150 mg/l of EPS, 150 mg/l of WPS and 200 mg/l of SPS, the total rutin and quercetin yield of buckwheat sprouts was effectively increased to 49.18 mg/(100 sprouts), 50.54 mg/(100 sprouts), and 52.27 mg/(100 sprouts), respectively. That was about 1.57- to 1.66-fold in comparison with the control culture of 31.40 mg/(100 sprouts). Moreover, the present study revealed the accumulation of bioactive flavonoids resulted from the stimulation of the phenylpropanoid pathway by fungal polysaccharide treatments. It could be an efficient strategy for improving the nutritional and functional quality of tartary buckwheat sprouts applied with specific fungal elicitors.

Restricted access

The purpose of this study was to evaluate the ability of Lactobacillus rhamnosus to bind patulin (PAT) in the buffer solution and apple juice. The binding of L. rhamnosus to PAT was reversible, which improved the stability of the bacterial complex. The ability to bind PAT can be enhanced with the inactivation of the strain by high temperature and acid treatment. Acid-treated bacteria had the highest PAT binding rate of 72.73±1.05%. The binding rates of acid and high temperature (121 °C) treatments were increased by 21.37% and 19.15%, respectively. L. rhamnosus showed the best detoxification ability to PAT at 37 °C, where the binding rate reached 50.9±1.03%. When the dose of inactivated bacteria powder was 0.02 g ml−1, the minimum concentration of PAT in apple juice was 0.37 µg ml−1. The addition of the L. rhamnosus inactivated powder did not affect the quality of the juice product and effectively bound the PAT in apple juice.

Restricted access

Abstract  

Fe–B ultrafine amorphous alloy particles (UFAAP) were prepared by chemical reduction of Fe3+ with NaBHO4 and confirmed to be ultrafine amorphous particles by transmission electron microscopy and X-ray diffraction. The specific heat of the sample was measured by a high precision adiabatic calorimeter, and a differential scanning calorimeter was used for thermal stability analysis. A topological structure of Fe-B atoms is proposed to explain two crystallization peaks and a melting peak observed at T=600, 868 and 1645 K, respectively.

Restricted access

Abstract  

The catalytic and accelerating effects of three coal-burning additives (CBA) on the burning of graphite were studied with the help of thermogravimetric (TG) analysis. The kinetic study on the catalytic oxidation of the graphite doped with CBA was carried out and the results were presented. The results show that the CBA can change the carbon oxidation/combustion course by catalytic action and change the activation energy, thus improving the combustion efficiency.

Restricted access

Abstract  

As one primary component of Vitamin B3, nicotinic acid [pyridine 3-carboxylic acid] was synthesized, and calorimetric study and thermal analysis for this compound were performed. The low-temperature heat capacity of nicotinic acid was measured with a precise automated adiabatic calorimeter over the temperature rang from 79 to 368 K. No thermal anomaly or phase transition was observed in this temperature range. A solid-to-solid transition at T trs=451.4 K, a solid-to-liquid transition at T fus=509.1 K and a thermal decomposition at T d=538.8 K were found through the DSC and TG-DTG techniques. The molar enthalpies of these transitions were determined to be Δtrs H m=0.81 kJ mol-1, Δfus H m=27.57 kJ mol-1 and Δd H m=62.38 kJ mol-1, respectively, by the integrals of the peak areas of the DSC curves.

Restricted access

Abstract  

The heat capacities of berberine sulphate [(C20H18NO4)2SO43H2O] were measured from 80 to 390 K by means of an automated adiabatic calorimeter. Smoothed heat capacities, H T-H 298.15 and S T-S 298.15 were calculated. The loss of crystalline water started at about 339.30.2 K, and its peak temperature was 365.80.6 K. The peak temperature of decomposition for berberine sulphate was at about 391.40.4 K by DSC curve. TG-DTG analysis of this material was carried out in temperature range from 310 to 970 K. TG and DSC curves show that there is no melting in the whole heating process.

Restricted access

Abstract  

A solid complex of rare-earth compounds with alanine, [ErY(Ala)4(H2O)8](ClO4)6 (Ala=alanine), was synthesized, and a calorimetric study and thermal analysis for it was performed through adiabatic calorimetry and thermogravimetry. The low-temperature heat capacity of [ErY(Ala)4(H2O)8](ClO4)6 was measured with an automated adiabatic precision calorimeter over the temperature range from 78 to 377 K. A solid-solid phase transition was found between 99 and 121 K with a peak temperature at 115.78 k. The enthalpy and entropy of the phase transition was determined to be 1.957 Kj mol-1, 16.90 j mol-1 k-1, respectively. Thermal decomposition of the complex was investigated in the temperature range of 40~550C by use of the thermogravimetric and differential thermogravimetric (TG/DTG) analysis techniques. The TG/DTG curves showed that the decomposition started from 120 and ended at 430C, completed in three steps. A possible mechanism of the thermal decomposition was elucidated.

Restricted access

Abstract  

The heat capacities of 2-benzoylpyridine were measured with an automated adiabatic calorimeter over the temperature range from 80 to 340 K. The melting point, molar enthalpy, Δfus H m, and entropy, Δfus S m, of fusion of this compound were determined to be 316.49±0.04 K, 20.91±0.03 kJ mol–1 and 66.07±0.05 J mol–1 K–1, respectively. The purity of the compound was calculated to be 99.60 mol% by using the fractional melting technique. The thermodynamic functions (H TH 298.15) and (S TS 298.15) were calculated based on the heat capacity measurements in the temperature range of 80–340 K with an interval of 5 K. The thermal properties of the compound were further investigated by differential scanning calorimetry (DSC). From the DSC curve, the temperature corresponding to the maximum evaporation rate, the molar enthalpy and entropy of evaporation were determined to be 556.3±0.1 K, 51.3±0.2 kJ mol–1 and 92.2±0.4 J K–1 mol–1, respectively, under the experimental conditions.

Restricted access

Abstract  

To obtain a biodegradable polymer material with satisfactory thermal properties, higher elongation and modulus of elasticity, a new copolyester, poly(hexylene terephthalate-co-lactide) (PHTL), was synthesized via direct polycondensation from terephthaloyl dichloride, 1,6-hexanediol and oligo(lactic acid). The resulting copolyesters were characterized by proton nuclear magnetic resonance (1H NMR), differential scanning calorimetry (DSC), thermogravimetry (TG) and wide-angle X-ray scattering (WAXS). By using the relative integral areas of the dyad peaks in 1H NMR spectrum of copolyesters PHTL, the sequence lengths of the hexylene terephthalate and lactide units in the resultant copolyesters are 3.5 and 1.5, respectively. Compared to poly(hexylene terephthalate) (PHT), PHTL has lower T m but higher T g due to the incorporation of lactide unit into the main chains of copolyesters. The degradation test of copolyesters under a physiological condition shows that the degradability of PHTL is sped up due to incorporation of lactide segments.

Restricted access