Search Results
You are looking at 31 - 40 of 78 items for :
- Author or Editor: Y. Chen x
- Chemistry and Chemical Engineering x
- Refine by Access: All Content x
Summary
A novel liquid-phase microextraction (LPME) technique, based on a hollow fiber (HF), in conjunction with high-performance liquid chromatography, has been developed for analysis of melamine in milk products. Melamine was extracted directly from milk products by use of a hollow-fiber membrane filled with organic solvent. HFLPME conditions, for example pH, extraction solvent, temperature, stirring rate, and extraction time were optimized. The best extraction efficiency of melamine was achieved under the conditions: pH 9.5, 35 μL n-octanol as extraction solvent, temperature 55°C, stirring rate 300 rpm, and extraction time 30 min. The HF-LPME technique resulted in a preconcentration ratio of 29-fold. Baseline chromatographic separation of melamine was achieved on a C18 column with 96:4 (v/v) 0.02 mol L−1 ammonium sulfate-methanol as isocratic mobile phase. The linearity of the method ranged from 1.0 to 100.0 μg mL−1, correlation coefficient 0.9994. The limit of detection by use of HF-LPME was 0.021 μg mL−1 at a signal-to-noise ratio of 3. The optimized HF-LPME technique was successfully applied to the analysis of melamine in milk products collected from different commodity manufacturing units.
This study aims to develop and validate a high-performance size-exclusion chromatography (HPSEC) method to determine the amount of polymer in cefmetazole sodium for injection and to compare this method with gel chromatography. A Zenix SEC-150 column was used with the mobile phase of phosphate buffer solution (pH 7.0; 0.01 M)—acetonitrile (90:10 v/v) at a flow rate of 0.8 mL min−1 and a detection wavelength of 240 nm. The polymer was quantified by an external standard method with self-control, and the amount was expressed by the percentage of cefmetazole. The HPSEC method was validated for specificity, linearity, and precision. The chromatographic conditions, chromatographic performances, sensitivity, linearity, and precision of the developed HPSEC method and gel chromatography were compared, and both methods were subsequently used to determine the amount of polymer from seven batches of samples. The HPSEC method was fully validated. The time of isocratic elution for sample assay was less than 14 min. The results of comparison indicate that the developed HPSEC method was superior to gel chromatography. The Student t test results also showed significant difference in the amount of polymer from the samples obtained by the two methods. Thus, the HPSEC method with two obvious advantages, the superior sensitivity and a shorter analysis time, is more suitable for determination of polymer amount in cefmetazole sodium for injection to control the quality of the product.
Summary
1,7-Dihydroxy-3,8-dimethoxyxanthone (X1) and 1,8-dihydroxy-3,7-dimethoxyxanthone (X2) are two important xanthones of the Tibetan medicinal plant Gentianopsis paludosa (Hook. f.) Ma. They are very similar in structure, the only difference being exchange of OH and OCH3 at the 7 and 8 positions. By calculations based on the geometry of the molecules using the MM+ force field, the different distances between the hydroxyl groups of the two xanthones were obtained (4.64774 Å for X2 and 7.19412 Å for X1), therefore, the two hydroxyl groups of X1 should freely interact with more water molecules than those of X2 in aqueous solution. In other words, X2 is more hydrophobic than X1. Micellar electrokinetic capillary chromatography (MEKC) was therefore chosen for separation of the compounds. The optimum separation conditions were: 20 mm borate + 20 mm SDS (pH 9.8) as running buffer, 17.5 kV applied potential, and detection wavelength 260 nm. The two xanthones were well separated in 9.0 min, with Gaussian peak shapes. The repeatability of the MEKC method (expressed as RSD) for X1 and X2 was 0.9 and 1.1%, respectively, for migration time, and 3.1 and 1.4% for peak area. The limits of detection (S/N = 3) were 0.41 μg mL−1 for X1 and 0.82 μg mL−1 for X2. The recovery of the MEKC method for the two xanthones was also satisfactory.
Abstract
The thiourea complexes of antimony and bismuth triiodide were synthesized by a direct reaction of antimony and bismuth triiodide with thiourea powder at room temperature. The formula of the complex is MI3[SC(NH2)2]3(M=Sb, Bi). The crystal structure of the complexes belongs to monoclinic system and the lattice parameters are a=1.4772 nm, b=1.6582 nm, c=2.0674 nm and β=90.81 for SbI3(SC(NH2)2)3 and a=1.4009 nm, b=2.0170 nm, c=2.0397 nm and β=90.84 for BiI3[SC(NH2)2]3. The infrared spectra reveal that the trivalent antimony or bismuth ion is coordinated by the nitrogen atom, not the sulfur atom of the thiourea. Thermal analysis shows that there are two times structure rearrangements or phase transformation in the complexes from 100 to 170C.
Abstract
New hexamethylenetetramine complexes of antimony and bismuth trichloride were synthesized through a solid phase reaction of hexamethylenetetramine and antimony or bismuth trichloride. The formula of the complex is MCl3(C6H12N4)2⋅H2O (M=Sb, Bi).The crystal structure of the complexes belongs to monoclinic system and the lattice parameters: a=1.249 nm, b=1.4583 nm, c=1.6780 nm andβ=91.78 for SbCl3(C6H12N4)2⋅H2O and a=1.3250 nm, b=1.3889 nm, c=1.7449 nm and β=98.94 for BiCl3(C6H12N4)2⋅H2O. Far-infrared spectra reveal that the antimony or bismuth ion is coordinated by the nitrogen atom of the hexamethylenetetramine. The thermal analysis also demonstrates the complex formation between the antimony or bismuth ion and hexamethylenetetramine. The intermediate and final residues in the thermal decomposition process have been analyzed to check the pyrolysis reaction.
Abstract
To obtain a biodegradable polymer material with satisfactory thermal properties, higher elongation and modulus of elasticity, a new copolyester, poly(hexylene terephthalate-co-lactide) (PHTL), was synthesized via direct polycondensation from terephthaloyl dichloride, 1,6-hexanediol and oligo(lactic acid). The resulting copolyesters were characterized by proton nuclear magnetic resonance (1H NMR), differential scanning calorimetry (DSC), thermogravimetry (TG) and wide-angle X-ray scattering (WAXS). By using the relative integral areas of the dyad peaks in 1H NMR spectrum of copolyesters PHTL, the sequence lengths of the hexylene terephthalate and lactide units in the resultant copolyesters are 3.5 and 1.5, respectively. Compared to poly(hexylene terephthalate) (PHT), PHTL has lower T m but higher T g due to the incorporation of lactide unit into the main chains of copolyesters. The degradation test of copolyesters under a physiological condition shows that the degradability of PHTL is sped up due to incorporation of lactide segments.
Abstract
This work is the first evaluation of environmental gamma exposure rates by the Nuclear Medicine Department at Lin Shin Hospital (LSH) in Taichung with Thermoluminescent dosimeter (TLD-100H) during the Fukushima Nuclear Power Plant (FNPP) accident. After the 9.0 MW strong earthquake hit northern Japan on March 11, 2011, a TLD-100H was used to monitor environmental kerma rate at Taichung (2,500 km away from northern Japan) from Mar-08 to Apr-09, 2011 and evaluated kerma rate due to global fallout of the sever FNPP accidents. Exposure rates varied widely among positions close to the PET/CT facility. Observed kerma rates of up to 4.12 ± 0.62 mSv mo−1 indicated an explicit, heavy leakage of photon through the PET/CT facility. No significant contributions were detected at Taichung, Taiwan. Hence, the health effect cause by the “extra radiation” from FNPP accidents is negligible. As this was a rare case of environmental monitoring during a nuclear power plant accident, its findings are of considerable significance.
Bee pollen is a health food with a wide range of nutritional and therapeutic properties. However, the bioactive compounds of bee pollen have not been extensively revealed due to low efficacy in separation. High-speed counter-current chromatography (HSCCC) and solvent extraction were applied to separate tyrosinase inhibitors from camellia pollen in this study. The camellia pollen extracts prepared with petroleum ether, ethyl acetate, and n-BuOH have tyrosinase inhibitory activity. Acidic hydrolysis could promote the tyrosinase inhibitory activity of crude sample. Three fractions with tyrosinase inhibitory activity were separated from the hydrolysate by a one-step HSCCC procedure. Among the fractions, two chemicals were sufficiently purified and identified to be levulinic acid (LA) and 5-hydroxymethylfurfural (5-HMF). The recovery was 0.80 g kg−1 pollen for LA and 1.75 g kg−1 pollen for 5-HMF; and their purity was all over 98%. The study demonstrates that HSCCC method is powerful for preparative separation of tyrosinase inhibitors from camellia pollen.
Abstract
A novel complex, [Pr(5-nip)(phen)(NO3)(DMF)] (5-nip: 5-nitroisophthalic acid; phen: 1,10-phenanthroline, DMF: N,N-dimethylformamide), was prepared and characterized by single crystal X-ray diffraction, elemental analysis, IR spectrum and DTG-DSC techniques. The results show that the crystal is monoclinic, space group P2(1)/n with a=11.0876(6) Å, b=12.8739(7) Å, c=16.9994(8) Å; β=91.193(4)°, Z=4, D c=1.822 Mg m–3, F(000)=1320. Each Pr(III) ion is nine-coordinated by one chelating bidentate and two monodentate bridging carboxylate groups, one chelating bidentate nitryl group, one DMF molecule and one 1,10-phenanthroline molecule. The complex is constructed with one-dimensional ribbons featuring dinuclear units and the one-dimensional ribbons are further assembled into two-dimensional networks by strong π–π stacking interactions. The complex has high stability up to 500°C. The enthalpy change of formation of the compound in DMF was measured using an RD496-III type microcalorimeter with the value of –9.214±0.173 kJ mol–1.
Abstract
Evaluation of minimal detectable amounts (MDA) of iodine in various or specified irradiation and measurement conditions is described. Interfering contributions due to Na and Cl to the spectral background as well as the dead time of detection system were calculated in details based on an experimental approach. The MDA of iodine for some important biological samples with various Na and Cl concentrations can be evaluated and predicted according to the specified irradiation and measurement arrangements to meet the requirement of analytical purposes.
