Search Results
You are looking at 61 - 70 of 71 items for :
- Author or Editor: L. Santos x
- Chemistry and Chemical Engineering x
- Refine by Access: All Content x
Abstract
Physico-chemical properties, spectroscopy, and thermal analyses were used aiming at evaluating the influence of toasting and of the flaxseed variety on thermo-oxidative behavior of flaxseed oils. Thermogravimetry (TG) and differential scanning calorimetry (DSC) were associated to gas chromatography, infrared spectroscopy and UV–Vis spectroscopy, as well as to physico-chemical analyses to characterize the oils obtained from raw and toasted flaxseeds. No meaningful differences in the thermal and oxidative stabilities were noticed comparing oils obtained from the brown and the golden flaxseeds. Nevertheless, the UV–Vis spectra indicated that both flaxseed oils were at the beginning of the oxidation process. The previous toasting of the seeds led to a higher oxidation for both varieties being harmful to the flaxseed oil quality.
Abstract
Chemical and thermal analyses of golden and brown flaxseeds were carried out for raw and toasted seeds aiming at evaluating their nutritional and thermo-oxidative properties. Moisture, lipids, protein, soluble carbohydrates, and ash contents were quantified. Concerning lipids and proteins, in average, no meaningful differences were observed for the two varieties, being also equivalent to the literature data. The golden variety had a lower amount of fibers and a higher amount of soluble carbohydrates than the brown variety. The techniques of thermogravimetry and differential scanning calorimetry were applied for elucidating the thermal degradation process of the seeds. The toasted gold and brown seeds were more stable to thermal decomposition than the raw seeds, under oxidative conditions. Golden seeds seem to be more susceptible to oxidation than brown seeds, under toasting conditions. Finally, no meaningful advantages were observed for the golden seeds in comparison to the brown ones.
Abstract
Physicochemical and thermal analyses were undertaken to evaluate the influence of the temperature on the oxidation of sea fish oil once its polyunsaturated fatty acids deteriorate rapidly. Fish oil displayed four decomposition steps in synthetic air atmosphere and only one step in nitrogen atmosphere. The first step started at 189 and 222 °C for oxidizing and inert atmospheres, respectively. An OIT value of 53 min was measured at 100 °C. After the degradation process the peroxide index and the iodine index reduced from 35.38 to 9.85 meq × 1000 g−1 and from 139.79 to 120.19 gI2 × 100 g−1, respectively. An increase of the free fatty acids amount from 0.07 to 0.17% was observed while viscosity increased from 57.2 to 58.0 cP. Absorption at 272 nm also increased. The thermogravimetric and spectroscopic techniques are reproducible and versatile being an option for characterization of edible oil oxidation.
Abstract
Alkaline earth stannates have recently become important materials in ceramic technology due to its application as humidity sensor. In this work, alkaline earth stannates doped with Fe3+ were synthesized by the polymeric precursor method, with calcination at 300 °C/7 h and between 400 and 1100 °C/4 h. The powder precursors were characterized by TG/DTA after partial elimination of carbon. Characterization after the second calcination step was done by X-ray diffraction, infrared spectroscopy, and UV–vis spectroscopy. Results confirmed the formation of the SrSnO3:Fe with orthorhombic perovskite structure, besides SrCO3 as secondary phase. Crystallization occurred at 600 °C, being much lower than the crystallization temperature of perovskites synthesized by solid state reaction. The analysis of TG curves indicated that the phase crystallization was preceded by two thermal decomposition steps. Carbonate elimination occurred at two different temperatures, around 800 °C and above 1000 °C.
Abstract
Copper monoxide (CuO) was successfully obtained by microwave-assisted hydrothermal method, using different conditions—in a solution without base, in a solution alkalinized with NaOH or with NH4OH. The powders were analyzed by thermal analysis (TG/DTA), X-ray diffraction (XRD), infrared spectroscopy, UV–Visible spectroscopy, and scanning electronic microscopy. XRD results showed that CuO was obtained with monoclinic structure and without secondary phases. Thermal analysis and infrared spectra indicated the presence of acetate groups on the powder surface. TG curves also showed a mass gain assigned to the Cu(I) oxidation indicating that a reduction possibly occurred during synthesis. The high and broad absorption band in the UV–Vis spectroscopy from 250 to 750 nm indicated the coexistence of Cu(II) and Cu(I), confirming the Cu(II) reduction, inside the CuO lattice. It was also possible to confirm the Cu(II) reduction by a displacement of the Me–O vibration bands observed in the IR spectra at around 500 cm−1.
Abstract
The poultry fat methylic (BMF) and ethylic (BEF) biodiesels were synthesized through transesterification by homogeneous basic catalysis. The chromatographic analyses showed the palmitic, stearic, oleic, and linoleic esters as majority components. Owing to its considerable amount of polyunsaturated fat acids, poultry fat usually leads to a biodiesel with low oxidative stability. In this study, the oxidation of their ethylic and methylic biodiesels was evaluated by Rancimat, PDSC, and PetroOxy. The OSI (Rancimat) was of 0.47 and 0.40 h for the ethylic and methylic biodiesel, respectively. In PDSC, both fuels presented an OT of about 120–123 °C. PetroOxy analysis indicated an OxyStab of 11 min for BEF and higher than 11 min for BMF. There was no correspondence among the oxidative stabilities of the employed techniques [OT(BEF) ≈ OT(BMF), OSI(BEF) > OSI(BMF), and OxyStab(BEF) < OxyStab(BMF)]. The discussion of these results was based on the indicator measured by each technique: enthalpic events are observed by PDSC; conductivity of volatile secondary oxidation products is measured by Rancimat; reduction of the oxygen pressure is determined by PetroOxy. This discussion showed that these different indicators do not reflect the same stage of the oxidative process as energy is release at the beginning of the propagation step, oxygen pressure decreases during the propagation step, and oxidation products are formed during the termination step.
Summary
Seven Asian countries have been collaborating in collecting airborne particulate matter (APM) in their individual countries and analyzing them by neutron activation analysis as a common analytical tool. APM samples were collected into two fractions of fine and coarse grains (PM2 and PM2-10, respectively). Analytical data were compared from several viewpoints such as particulate sizes, locality of sampling sites (either urban or rural) and geographical location of participating countries. Chemical composition and their monthly variations as well as mass concentrations appear to be highly characteristic for individual sampling sites, suggesting that NAA data are suitable for evaluating the air quality in each site.
