Authors:Z. Wu, A. Zhang, D. Shen, M. Leland, F. W. Harris, and S. Z. D. Cheng
Three aromatic polyimides based on 3,3′,4,4′-biphenyl-tetracarboxylic dianhydride (BPDA) and three different diamines 2,2′-bis(trifluoromethyl)-4,4′-diaminobiphenyl (PFMB), 2,2′-dimethyl-4, 4′-diaminophenyl (DMB) or 3,3′-dimethylbenzidine (OTOL) have been synthesized. These polyimides are soluble in hotp-chlorophenol,m-cresol or other phenolic solvents. Fibers have been spun from isotropic solutions using a dry-jet wet spinning method. The as-spun fibers generally exhibit low tensile properties, and can be drawn at elevated temperatures (>380° C) up to a draw ratio of 10 times. Remarkable increases in tensile strength and modulus are achieved after drawing and annealing. The crystal structures of highly drawn fibers were determinedvia wide angle X-ray diffraction (WAXD). The crystal unit cell lattices have been determined to be monoclinic for BPDA-PFMB and triclinic for both BPDA-DMB and BPDA-OTOL. Thermomechanical analysis (TMA) was used to measure thermal shrinkage stress and strain. A selfelongation has been found in the temperature region around 450°C. This phenomenon can be explained as resulting from the structural development in the fibers as evidencedvia WAXD observations.
Authors:Young Ho Kim, Bong Seok Moon, F. W. Harris, and S. Z. D. Cheng
A new high molecular weight polyimide based on 4,4′-oxidiphthalic anhydride (ODPA) dianhydride and 2,2′-dimethyl-4,4′-diaminobiphenyl (DMB) diamine has been synthesizedvia a one-step polymerization method. This polyimide is soluble in phenolic solvents. Films from 7 to 30 μm thick were cast from the polymer solution and show in-plane orientation on a molecular scale detected by Fourier transform infrared spectroscopy experiments. This anisotropic structure leads to anisotropic optical properties arising from two different refractive indices along the inplane and out-of-plane directions. ODPA DMB possesses high thermal and thermo-oxidative stability. The glass transition temperature has been determined to be 298 °C. Dynamic mechanical analyses show two relaxation processes appearing above room temperature: the β- and the α-relaxation processes. The α-relaxation corresponds to the glass transition while the β-relaxation is a secondary relaxation process associated with the non-cooperative subsegmental motion.
Authors:Y Yoon, R. -M. Ho, F. Li, B. Moon, D. Kim, J. -Y. Park, F. W. Harris, S. Z. D. Cheng, V. Percec, and P. Chu
A series of polyethers have been synthesized from 1-(4-hydroxy-4′-biphenyl)-2-(4-hydroxyphenyl)propane and α, Ω-dibromoalkanes having different numbers of methylene units [TPPs]. Both odd- and even-numbered TPPs [TPP(n=odd)s and TPP(n=even)s) exhibit multiple transitions during cooling and heating and they show little supercooling dependence, indicating close-to-equilibrium nature of these transitions. Combining the structural characterization obtainedvia wide angle X-ray diffraction powder and fiber patterns at different temperatures and the morphological observations from microscopy techniques, not only the nematic liquid crystalline phase but also highly ordered smecticF, smectic crystalG andH phases have been identified. The phase diagrams for both TPP(n=odd)s and TPP(n=even)s have been constructed [1–3]. Thermodynamic properties (enthalpy and entropy changes) during these transitions are studied based on differential scanning calorimetry experiments. The contributions of the mesogenic groups and methylene units to each ordering process can be separated and they indicate the characteristics of these processes thereby providing estimations of the transition types.