Search Results
fundamental knowledge on the thermal degradation pathways of poly( N -vinyl pyrrolidone) using Thermogravimetry coupled with Fourier Transform Infrared Spectroscopy (TG–FTIR) to analyze the evolved gases during decomposition. In addition, the partially
Abstract
FTIR spectrometry combined with TG provides information regarding mass changes in a sample and permits qualitative identification of the gases evolved during thermal degradation. Various fuels were studied: coal, peat, wood chips, bark, reed canary grass and municipal solid waste. The gases evolved in a TG analyser were transferred to the FTIR via a heated teflon line. The spectra and thermoanalytical curves indicated that the major gases evolved were carbon dioxide and water, while there were many minor gases, e.g. carbon monoxide, methane, ethane, methanol, ethanol, formic acid, acetic acid and formaldehyde. Separate evolved gas spectra also revealed the release of ammonia from biomasses and peat. Sulphur dioxide and nitric oxide were found in some cases. The evolution of the minor gases and water parallelled the first step in the TG curve. Solid fuels dried at 100C mainly lost water and a little ammonia.
Abstract
The combined thermogravimetric (TG) Fourier transform infrared (FTIR) techniques were used for studying the gaseous compounds evolved at thermooxidation of oil shale samples from different deposits (Estonia, Jordan, Israel). In addition to H2O and CO2as the major species, the formation and emission of CO, SO2, HCl and a number of organic species as methane, ethane, ethylene, methanol, formic acid, formaldehyde, chlorobenzene, etc. was determined. Differences in the absorbance of respective bands in FTIR spectra depending on the origin of oil shale and on the heating rate used were established.
Abstract
A series of blends of polyoxymethylene (POM)/thermoplastic polyesterurethane (TPU) has been obtained by mechanical processing using a double screw extruder. The thermal stability and the thermal degradation profiles of POM/TPU blends were investigated by thermogravimetric analysis (TG) coupled on-line with Fourier transform infrared spectroscopy (FTIR). It was found that incorporation of TPU into POM matrix resulted in increase of thermal stability of blends in comparison with pristine materials. The thermal degradation of TPU in inert gas atmosphere proceeds in two steps while the thermal degradation of POM is basically a one step process with a substage in a higher temperature range. The most abundant volatile products of the thermal degradation were identified; the possibly routes of their formation have been presented.
Abstract
The thermal decomposition of sodium ethyl xanthate (SEX) was used to compare the techniques of pyrolysis-gas chromatography-mass spectrometry (py-GC-MS), thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR), and TG-MS. In the py-GC-MS analysis, SEX was pyrolysed at 400C in an inert atmosphere. Major gases evolved were carbon disulfide, diethyl sulfide, ethanol, and carbonyl sulfide. The TG of SEX exhibited a sharp mass loss at 201C (42.3%) and a gradual mass loss at 217-325C (20.8 %). The MS spectra of the evolved gases were complex due to overlapping of molecular, isotope, and fragment ion signals. Using the MS in selected ion monitoring mode, the major gases evolved were found to be carbon disulfide and carbonyl sulfide. The FTIR spectra of the evolved gases displayed vibrational frequencies due to alkanes, carbonyls, carbonyl sulfide, and carbon disulfide. From the analyses it was concluded that py-GC-MS provided unambiguous gas identification. Interpretation of the MS results was reliant on the py-GC-MS results, and the FTIR data was limited to identifying gases with very characteristic vibration frequencies.
Abstract
The effect of regeneration conditions on the composition of the gases evolved during the catalytic pyrolysis of low density (LDPE) and high density polyethylene (HDPE) with HUSY and HZSM5 catalysts has been analysed by the TG/FTIR technique. When regenerated HUSY was employed, the evolution of the gases obtained was similar to that with fresh HUSY, indicating that the regeneration treatment did not affect its properties. Nevertheless with HZSM5, as the regeneration temperature was higher, the composition of the gases gradually became more similar to that evolved in the thermal process.
Abstract
Multi-walled carbon nanotubes (MWCNTs) have remarkable properties. However, their thermal stability characteristics, which may represent potential hazards during the production or utilization stage, concern unsafe or unknown properties researches. Our aim was to analyze the thermokinetic parameters of different heating rates by differential scanning calorimetry (DSC) and thermogravimetric analyzer (TG), and then to compare thermal decomposition energy parameters under various conditions by well-known kinetic equations. MWCNTs were acidified via nitric acid (HNO3) in various concentrations from 3 to 15 N and were characterized by means of Fourier transform infrared (FTIR) spectrometry. For original and modified MWCNTs, we further identified the thermal degradation characteristics of the functional group by TG-FTIR. Finally, we established an effective and prompt procedure for receiving information on thermal decomposition characteristics and reaction hazard of MWCNTs that could be applied as an inherently safer design during normal or upset operation.
Abstract
Detailed thermal analysis of manganese(II) complexes with a-amino acids were carried out. The thermal degradation is multi-stage. Dehydration of complexes is the first mass loss step. Anhydrous compounds are unstable and decompose to Mn3O4 in air or to MnO in inert atmosphere. The intermediate solid products were identified by TG method and TG/FTIR combined technique. Among others solid residues, the presence of MnSO4, MnBr2 and Mn(CH3COO)Cl was found. In the gaseous products of decomposition of organic ligand H2O, NH3, CO2, CO, aromatic and non-aromatic hydrocarbons and very probably cyanoacetic acid and dimethyl sulfide occurred. Inorganic ions, i.e. Cl-, Br-or So4 2-remain in the solid products of decomposition or are lost as HCl, HBr or SO2.
Abstract
Identification and monitoring of gaseous species released during thermal decomposition of pure thiourea, (NH2)2C=S in argon, helium and air atmosphere have been carried out by both online coupled TG-FTIR and simultaneous TG/DTA-MS apparatuses manufactured by TA Instruments (USA). In both inert atmospheres and air between 182 and 240°C the main gaseous products of thiourea are ammonia (NH3) and carbon disulfide (CS2), whilst in flowing air sulphur dioxide (SO2) and carbonyl sulphide (COS) as gas phase oxidation products of CS2, and in addition hydrogen cyanide (HCN) also occur, which are detected by both FTIR spectroscopic and mass spectrometric EGA methods. Some evolution of isothiocyanic acid (HNCS) and cyanamide (NH2CN) vapours have also observed mainly by EGA-FTIR, and largely depending on the experimental conditions. HNCS is hardly identified by mass spectrometry. Any evolution of H2S has not been detected at any stage of thiourea degradation by either of the two methods. The exothermic heat effect of gas phase oxidation process of CS2 partially compensates the endothermicity of the corresponding degradation step producing CS2.
Evolved gas analysis of amorphous precursors for S-doped TiO2 by TG-FTIR and TG/DTA-MS
Part 3. Candidate from thiourea and Ti(IV)-ethoxide
Abstract
Thermal decomposition of an amorphous precursor for S-doped titania (TiO2) nanopowders, prepared by controlled sol–gel hydrolysis–condensation of titanium(IV) tetraethoxide and thiourea in aqueous ethanol, has been studied up to 800 °C in flowing air. Simultaneous thermogravimetric and differential thermal analysis coupled online with quadrupole mass spectrometer (TG/DTA-MS) and FTIR spectrometric gas cell (TG-FTIR) have been applied for analysis of released gases (EGA) and their evolution dynamics in order to explore and simulate thermal annealing processes of fabrication techniques of the aimed S:TiO2 photocatalysts with photocatalytic activities under visible light. The precursor sample prepared with thiourea, released first water endothermically from room temperature to 190 °C, carbonyl sulfide (COS) from 120 to 240 °C in two stages, ammonia (NH3) from 170 to 350 °C in three steps, and organic mater (probably ether and ethylene) between 140 and 230 °C. The evolution of CO2, H2O and SO2, as oxidation products, occurs between 180 and 240 °C, accompanied by exothermic DTA peaks at 190 and 235 °C. Some small mass gain occurs before the following exothermic heat effect at 500 °C, which is probably due to the simultaneous burning out of residual carbonaceous and sulphureous species, and transformation of amorphous titania into anatase. The oxidative process is accompanied by evolution of CO2 and SO2. Anatase, which formed also in the exothermic peak at 500 °C, mainly keeps its structure, since only 10% of rutile formation is detected below or at 800 °C by XRD. Meanwhile, from 500 °C, a final burning off organics is also indicated by continuous CO2 evolution and small exothermic effects.
