conductivity of thermosetting polymers depends on the crosslink level which is very sensitive to the curing conditions [ 32 – 34 ] as well as properties of thermoplastic-thermoset blends are highly dependent on the morphology of samples [ 35 ]. Therefore
Authors:S. Calvo, J. Escribano, M. G. Prolongo, R. M. Masegosa, and C. Salom
mixture along curing process. In UP + PCL50 system, a separated phase morphology is observed, in which the thermoplastic phase would turn into an obstacle for reacting groups, reducing the connectivity of thermoset phase and lowering the modulus. It has
, 18 ]. DPHM shown below in reaction mechanism refers to 2,2-diphenyl-hydroxy methane.
Polyfurfuryl alcohol (PFA) is a thermoset biopolymer derived from sugar cane bagasse. PFA has inherently very high thermal stability
residual stress analysis [ 4 ]. Electrically conductive adhesives consist of a polymer binder that provides mechanical strength and conductive fillers, which offer electrical conduction. Polymers are commonly classified as either thermosets (such as epoxies
thermogravimetric method [ 15 – 18 ]. Lopez et al. [ 19 ] studied the effect of thermoplastic on cure reaction and thermal stability of epoxy-amine thermoset and thermoplastic-based polymer blends, and reported that modifier did not affect the thermal and thermo
Epoxy resins are very used thermoset polymers because of their good combination of high elastic modulus and mechanical strength and good chemical and thermal resistance. One of their main limitations, the low