Search Results

You are looking at 1 - 3 of 3 items for :

  • "EDTA-gel precursors" x
  • Chemistry and Chemical Engineering x
  • Refine by Access: All Content x
Clear All

Abstract  

Raw chemicals such as metal nitrates and chlorides were found to affect the thermal decomposition behaviour of EDTA-gel precursors used for the production of ceramic powders. Fine, homogeneous ceramic powders were produced from nitrate solutions while chlorides gave segregated phases. In studies on the production of lead zirconate titanate (PZT) using chlorides, the segregation and loss of lead was observed and shown to be caused by the formation and evaporation of PbCl2. Thermal analysis (DTA/TG) quantitatively proved the suggested reaction mechanism for this phase segregation. Crystallization of the desired perovskite phase of lead zirconate titanate (PZT) and barium titanate (BT) initiated at temperatures as low as 250°C in the nitrate-EDTA precursors. Water of crystallization and formation of BaCO3 in the barium titanate precursor were suggested to account for differences in the observed decompositional behaviours of the BT and PZT precursors.

Restricted access

Abstract  

The decomposition of EDTA gel precursors for BSCCO superconductor manufacture has been studied using STA (TG/DTA) and dilatometry in conjunction with FTIR. The thermoanalytical data are discussed in relation to the sequence of phase formation necessary for the production of the 2223 BSCCO superconducting phase. The effects of substitution of Pb for Bi on the temperatures of formation of the superconducting phases is also discussed. STA has also been carried out under varying oxygen partial pressures to determine the effects of oxygen pressure on the formation and decomposition of the phases involved in the production of the 2223 compound.

Restricted access

Abstract  

The decomposition of EDTA gel precursors for BSCCO superconductor manufacture has been studied using STA (TG/DTA) and dilatometry in conjunction with FTIR. Ther thermoanalytical data are discussed in relation to the sequence of phase formation necessary for the production of the 2223 BSCCO superconducting phase. Thin film preparation of Bi-based highT c superconductors have been carried out on MgO (100). Grain orientation of oxide thin films has been investigated. Well orientated 2212 grains have been achieved, with the (001) planes parallel to the substrate. The EDTA-gel method has been modified by the addition of glycerol to achieve the appropriate viscosity for spin coating. STA has been used to study the decomposition of these modified gels for the formation of thin films.

Restricted access