Search Results

You are looking at 1 - 10 of 19 items for :

  • "Sintering" x
  • Materials and Applied Sciences x
  • Refine by Access: All Content x
Clear All

1 Introduction Due to its success with the production of complicated parts, 3D printing techniques like selective laser melting (SLM) and selective laser sintering are being used with different materials and in various areas [ 1 , 2 ]. In the

Open access
Resolution and Discovery
Authors:
Haroune Rachid Ben Zine
,
Filiz Cinar Sahin
,
Zsolt E. Horváth
,
Zsolt Czigány
,
Ákos Horváth
,
Katalin Balázsi
, and
Csaba Balázsi

mechanical properties [ 4 ]. Balázsi et al. prepared firstly the 316L austenitic stainless steel composites by spark plasma sintering (SPS) [ 5 ]. The SLM process provides considerably finer microstructure than the conventionally manufacturing processes [ 6

Open access

artificial aggregates available, lightweight aggregates including expandable shale and slate, foamed slag, sintered fly ash aggregate, artificial cinders, and lightweight expanded clay aggregate (LECA) are the most frequently used. Significant recent and

Open access
Pollack Periodica
Authors:
Jamal Eldin F. M. Ibrahim
,
Mohammed Tihtih
,
Emese Kurovics
,
Ethem İlhan Şahin
,
László A. Gömze
, and
István Kocserha

at temperatures ranging from 800 to 1,000 °C [ 7 ]. Upon the sintering and when the temperature exceeds the glass transition temperature, the mixture starts to soften, making a viscoelastic material associated with the emission of the gas resulting

Open access
Pollack Periodica
Authors:
Jamal Eldin F. M. Ibrahim
,
Emese Kurovics
,
Mohammed Tihtih
, and
László A. Gömze

sintering temperature leads to an increase in the thermal conductivity and mechanical strength. The bricks’ thermal conductivity is highly connected to many factors, including raw material composition, firing temperature, and the porosity of the fired bricks

Open access

. Polini S. Turchetta 2004 Test protocol for micro-geometric wear of sintered diamond tools Wear 257 24

Restricted access

]. Polini , W. , Turchetta , S. ( 2004 ), Test protocol for micro-geometric wear of sintered diamond tools . Wear, 24 – 256 . [7]. Gyurika , I. ( 2012 ), Characteristics of wear

Restricted access
Resolution and Discovery
Authors:
Gábor Kozma
,
Dániel Berkesi
,
Katalin Liptak
,
Andrea Rónavári
,
Ákos Kukovecz
, and
Zoltán Kónya

.7° (220); 70.2° (300); 74.7° (310); 78.9° (311). [ 8 ] BaTiO 3 produced at a sintering temperature above 1,000 °C, is typically tetragonal and changed to the hexagonal structure above 1,400 °C [ 9 ]. The typical reflections of ZnTiO 3 between 2 theta 20

Open access

] Wang Y. P. , Zhou , L. , Zhang , M. F. , Chen , X. Y. , Liu , J. M. , Liu Z. G. ( 2004 ) Room-temperature saturated ferroelectric polarization in BiFeO 3 ceramics synthesized by rapid liquid phase sintering

Open access

can lead to coating delamination at the coating–substrate interface [ 13 ]. Although sintering during the thermal plasma spraying (TPS) process improves the coating adhesion, high temperature results to decomposition of Hap to various phases such as

Open access