Search Results

You are looking at 1 - 10 of 24 items for :

  • "Thermal properties" x
  • Architecture and Architectonics x
  • Refine by Access: All Content x
Clear All

Center 2012 [5] Dynamic thermal properties calculator , Published by MPA, The Concrete Centre, Meadows Business Park, Station Approach, Blackwater, Camberley

Restricted access

thermal properties of aerogel blankets: Measurements, calculations, simulations . Energy and Buildings , 139 , 506 – 516 . [3] Arens E. , Hoyt T

Open access
Pollack Periodica
Authors: Jamal Eldin F. M. Ibrahim, Emese Kurovics, Mohammed Tihtih, and László A. Gömze

.50 3.1.2 Thermal properties of raw materials TG/DTA curves of the natural zeolite are shown in Fig. 2 . Overall weight loss of approximately 9.3% was obtained at 1,200 °C. Firstly, a 5.29% decrease in the mass was

Open access

Abstract

Non-reinforced and reinforced Poly-Ether-Ether-Ketone (PEEK) plastics have excellent mechanical and thermal properties. Machining is an efficient process that can be used to manufacture specific mechanical parts made from PEEK composites. Researchers have focused on improving the performance of machining operations with the aim of minimizing costs and improving quality of manufactured products, in order to get the best surface roughness and the minimum cutting force. The parameters evaluated are the cutting speed, the depth of cut and the feed rate. In this paper, the effect of the mentioned parameters on surface roughness and cutting force, in dry turning of reinforced PEEK with 30% of carbon fibers (PEEK CF30) using TiN coated cutting tools, is analyzed through using robust design techniques such as Taguchi's design method, signal-to-noise (S/N) ratio and statistical analysis tools such as Pareto-ANOVA. The obtained results have shown that Taguchi method and Pareto ANOVA are suitable for optimizing the cutting parameters with the minimum possible number of experiments, and the optimized process parameters were determined for surface roughness and cutting force criteria.

Restricted access

building surfaces . Journal of Building Engineering , 239 – 245 . [16] Lakatos A. ( 2014 ), Measurements of thermal properties of

Open access

A. M. , Roos A. ( 2009 ), Evaluation of optical and thermal properties of coatings for energy efficient windows . Thin Solid Films , 517 , 3173 – 3177 . [16] ASHRAE Handbook, Fundamentals

Restricted access

] Lakatos A. ( 2014 ), Comparison of the thermal properties of different insulating materials . Advanced Materials Research 899 , 381 – 386 . [10

Restricted access

F. Scudeller Y. Goudet L. Mechanical and thermal properties of lime and hemp concrete

Restricted access

] Ham Y. , Golparvar-Fard M. ( 2015 ), Mapping actual thermal properties to building elements in gbXML-based BIM for reliable building energy performance modeling . Automation in Construction , 49 , 214 – 224

Open access

thermal physical correlations used to define different thermal properties. Depending on the literature, several review papers represented the researches that related to the enhancement of heat transfer, geometry, optical efficiency, thermal energy, and

Open access