Search Results
microscopy–energy dispersive spectroscopy (SEM–EDS) investigation of the cross-sections. Experimental procedures The wettability tests were executed by the sessile drop method. Copper plate was used as substrate (purity, 99.9 wt
activation and carbonization is used to produce carbon nanostructured material from agro waste in simple steps, adding value to the products. Experimental Procedure Sample Preparation and Pre-carbonization Methods
capacity parameters with finite thickness and the transient point from infinite to finite space was studied in this work. 2 Experimental procedure The work was conducted at the vehicle engineering laboratory at Szent Istvan University (Godollo
(EDS). 2 Experimental procedure 2.1 Welding process The materials used in this experimental work were aluminum AA1100 and mild steel. They were cylindrical rods with 12 mm in diameter and 70 mm in length, as shown in Fig. 3 . Table 1 presents the
materials include P. conophora leaf , HCl and H 2 SO 4 acids. Ethanol, filter paper, air tight plastic containers were all used during the extraction of active ingredients from the P. conophora leaf to produce the inhibitor. 2.2 Experimental procedure
This paper presents a nonstandard experimental procedure for detection of the presence of salts in building materials. The proposed tests helped modeling the deterioration of specific historical building materials caused by salts. The specimens were subject to visual survey and scanning electron microscope analyses, after submerging them in salt solutions. The results showed the damage of brick, cement based mortar and lime based mortar, caused by various concentrations of sulphate and chloride solutions. By this method various types of salt crystals could be identified. In cement and lime based mortars larger extents of salt deposits were found. A relevant difference between the control samples and the salt treated samples was observed.
method given by Davis (1947) and Mishra and co-workers (2014) , respectively. 1.3 Overview of experimental method Figure 1 illustrates an overall experimental procedure, where pomelo juice was frozen in a deep freezer (Lyolab_3S, Lyophilisation Sytems
heat transfer coefficients are defined for air-flow in photovoltaic modules considering air speed, geographical location of the elements and air temperature. Important information about experimental procedures regarding heated cylinders is shown by [ 12
using a Minolta Spectrophotometer CM-3600 d (Japan) according to the CIE L * a * b * system. 1.9 Statistical analysis Experimental procedure used in this study was summarised in Figure 1 . The effect of applications on physical quality of bread samples
body weight, Aladdin, S106853) and Control group and AD group were given an equal volume of distilled water by gavage daily ( Fig. 1A ). All experimental procedures followed the Guide for the Care and Use of Laboratory Animals: Eighth Edition, ISBN-10
