Search Results

You are looking at 1 - 10 of 12 items for :

  • Materials and Applied Sciences x
  • Refine by Access: Content accessible to me x
Clear All

References [1] Ji L. K. , Zheng M. , et al. ( 2015 ), Apparent strain of a pipe at plastic bending buckling state . J. of the

Open access

this paper is modeling and simulating the closing process of a plastic box buckle using nonlinear Finite Element Method (FEM), then to compare the results obtained via an industrial robot. An intelligent end-effector has been developed, which contains a

Open access

1 Introduction Rectangular plates are used as thin-walled structural elements in engineering structures, such as ships, aircrafts, bridges, and offshore structures. Analysis of inelastic buckling of thin rectangular plates is important, especially

Open access

(material) imperfections (e.g., residual stresses). Besides, due to high width-to-thickness ratio of I-section steel members, local buckling occurs [ 2 ]. These imperfections considerably affect the behavior of steel members and reduce their buckling

Open access

. Buckling of offshore structures , Granada, London , 1984 . [5] Eurocode 3, Part 1.1, Design of steel structures, General rules and rules for buildings , European Committee for

Open access

flexural strength of the compressed bars and the buckling strength of the plates and shells. Warps can result in dimensionally inaccurate structural elements and scrap. Therefore, it is necessary to estimate their magnitude in advance by calculating and

Open access

are located in a high seismic hazard zone. Three retrofit schemes were introduced including; 1) X-Steel bracings; 2) buckling restrained composite bracings; and 3) composite concrete-steel plate shear walls. The seismic performance enhancement of the

Open access

susceptible area of the tower structure, as the first natural frequency is not close to the corresponding 1P and 3P and the tower is a soft–stiff tower design. Future research work and investigation will be based on the development of buckling and fatigue

Open access

Onesteel Australian Tube Mills (OATM), made of two torsionally rigid hollow flanges and a slender web [ 1 ]. Fig. 1. Left: LiteSteel beams [ 1 ], right: Geometry of the tested section, on the basis of [ 2 ] The study of buckling is important and necessary

Open access

) [2] Buckling strength of shells , Recommended Practice DNV-RP-C202, Det Norske Veritas , 2002 . [3] Farkas J

Open access