A stability-indicating gradient reverse-phase liquid chromatographic method was developed for the quantitative determination of process-related impurities and forced degradation products of oxcarbazepine in pharmaceutical formulation. The method was developed by using Inertsil cyano (250 × 4.6 mm) 5 μm column with mobile phase containing a gradient mixture of solvent A (0.01 M sodium dihydrogen phosphate, pH adjusted to 2.7 with orthophosphoric acid and acetonitrile in the ratio of 80:20 v/v) and B (50:40:10 v/v/v mixture of acetonitrile, water, and methanol). The flow rate of mobile phase was 1.0 mL min−1. Column temperature was maintained at 25°C and detection wavelength at 220 nm. Developed reverse-phase high-performance liquid chromatography (RP-HPLC) method can adequately separate and quantitate five impurities of oxcarbazepine, namely imp-A, imp-B, imp-C, imp-D, and imp-E. Oxcarbazepine was subjected to the stress conditions of oxidative, acid, base, hydrolytic, thermal, and photolytic degradation. Oxcarbazepine was found to degrade significantly in acid, base, and oxidative stress conditions. The degradation products were well resolved from oxcarbazepine and its impurities. The developed method was validated as per International Conference on Harmonization (ICH) guidelines with respect to specificity, linearity, limit of detection and quantification, accuracy, precision, and robustness.
Authors:N. Kumar, D. Sangeetha, R. Goyal, and P. S. Reddy
A simple, selective, and stability-indicating reverse phase liquid chromatographic method has been developed and validated for the simultaneous determination of impurities and forced degradation products of quetiapine fumarate. The chromatographic separation was achieved on Inertsil-3 C8, 150 mm × 4.6 mm, 5 μm column at 35°C with UV detection at 217 nm using gradient mobile phase at a flow rate of 1.0 mL/min. Mobile phase A contains a mixture of 0.01 M di-potassium hydrogen orthophosphate (pH 6.8) and acetonitrile in the ratio of 80:20 (v/v), respectively, and mobile phase B contains a mixture of 0.01 M di-potassium hydrogen orthophosphate (pH 6.8) and acetonitrile in the ratio of 20:80 (v/v), respectively. The drug product was subjected to the stress conditions of oxidative, hydrolysis (acid and base), hydrolytic, thermal, and photolytic degradation. Quetiapine fumarate was found to degrade significantly in acid, base, and oxidative stress conditions. The degradation products were well resolved from main peak and its impurities. The mass balance was found to be in the range of 96.6–102.2% in all the stressed conditions, thus proved the stability-indicating power of the method. The developed method was validated as per ICH guidelines with respect to specificity, linearity, limit of detection and quantification, accuracy, precision, and robustness.
Authors:A. Kumar, R.K. Dubey, K. Kant, D. Sasmal, M. Ghosh, and N. Sharma
Deltamethrin, a well-known type 2 synthetic pyrethroid insecticide, is a widespread environmental toxicant. It has potential to accumulate in body fluids and tissues due to its lipophilic characteristics. The immune system is among the most sensitive targets regarding toxicity of environmental pollutants. Various methods are available in the literature to analyze deltamethrin (DLM) concentration in plasma and tissues, but regarding the immune organs, only one gas chromatography–tandem mass spectrometry (GC–MS/MS) method (on spleen tissues) has been reported. In the present investigation, a rapid and sensitive high-performance liquid chromatography (HPLC) method has been developed and validated to determine DLM concentration in plasma, thymus, and spleen using zaleplone as an internal standard. Liquid chromatography (LC) separation is performed on an Agilent Zorbax® C8 column (250 mm × 4.6 mm, i.d., 5 μm) with isocratic elution using a mobile phase consisting of acetonitrile–5 mM KH2PO4 (70:30, v/v) at a flow rate of 1 mL min−1. The lower limit of quantification (LLOQ) for DLM is 10 ng mL−1 (plasma, thymus, and spleen). The method has been validated in terms of establishing linearity, specificity, sensitivity, recovery, accuracy, and precision (intra- and inter-day) and stabilities study. This validated method was successfully applied to a pharmacokinetic and tissue distribution study of DLM in mice.