Search Results

You are looking at 1 - 10 of 10 items for :

  • "experimental procedure" x
  • Materials and Applied Sciences x
  • Refine by Access: Content accessible to me x
Clear All

microscopy–energy dispersive spectroscopy (SEM–EDS) investigation of the cross-sections. Experimental procedures The wettability tests were executed by the sessile drop method. Copper plate was used as substrate (purity, 99.9 wt

Open access

capacity parameters with finite thickness and the transient point from infinite to finite space was studied in this work. 2 Experimental procedure The work was conducted at the vehicle engineering laboratory at Szent Istvan University (Godollo

Open access

activation and carbonization is used to produce carbon nanostructured material from agro waste in simple steps, adding value to the products. Experimental Procedure Sample Preparation and Pre-carbonization Methods

Open access

(EDS). 2 Experimental procedure 2.1 Welding process The materials used in this experimental work were aluminum AA1100 and mild steel. They were cylindrical rods with 12 mm in diameter and 70 mm in length, as shown in Fig. 3 . Table 1 presents the

Open access

materials include P. conophora leaf , HCl and H 2 SO 4 acids. Ethanol, filter paper, air tight plastic containers were all used during the extraction of active ingredients from the P. conophora leaf to produce the inhibitor. 2.2 Experimental procedure

Open access

heat transfer coefficients are defined for air-flow in photovoltaic modules considering air speed, geographical location of the elements and air temperature. Important information about experimental procedures regarding heated cylinders is shown by [ 12

Open access

solution (30 v/v %) in Potter-Elvehjem instrument for appr. 20 sec in cold ice surrounding. The protein content of the liver homogenate was set at 10 mg ml −1 by the Lowry method ( Lowry et al., 1951 ). The experimental procedures were

Open access

, Rp , (mm) 3–10 BHF, (kN) 3–9 Coefficient of friction, μ 0.01–0.15 Fig. 1. Geometrical setup, a) before forming, b) after forming 3 Experimental procedures Some samples of the U-bending test experiment were conducted in dry and lubrication conditions

Open access
Pollack Periodica
Authors:
Souphavanh Senesavath
,
Ali Salem
,
Saied Kashkash
,
Bintul Zehra
, and
Zoltan Orban

Experimental procedure Experimental work presented in this paper was a part of a master's thesis from the University of Pécs. The experimental investigation was achieved using beams and cubes made from conventional concrete and fiber

Open access

.; D) 0.04% Vol. 4 Experimental procedure The following steps are applied during the test of pool boiling heat transfer using deionized water and MgO nanoparticles based deionized water nanofluid: First, the pool boiling chamber and the heating element

Open access