Authors:B. Liu, X. Lv, Z. Tan, Z. Zhang, Q. Shi, L. Yang, J. Xing, L. Sun, and T. Zhang
The molar heat capacity, Cp,m, of a complex of holmium chloride coordinated with L-aspartic acid, Ho(Asp)Cl2·6H2O, was measured from 80 to 397 K with an automated adiabatic calorimeter. The thermodynamic functions HT-H298.15 and ST-S298.15 were derived from 80 to 395 K with temperature interval of 5 K. The thermal stability of the complex was investigated by
differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the mechanism of thermal decomposing of
the complex was determined based on the structure and the thermal analysis experiment.
Two lines, L-19-613 and L-19-626, were produced from the common wheat cultivar Longmai 19 (L-19) by six consecutive backcrosses using biochemical marker-assisted selection. L-19 (Glu-D1a, Glu-A3c/Gli-A1?; Gli-A1? is a gene coding for unnamed gliadin) and L-19-613 (Glu-D1d, Glu-A3c/Gli-A1?) formed a set of near-isogenic lines (NILs) for HMW-GS, while L-19-613 and L-19-626 (Glu-D1d, Glu-A3e/Gli-A1m) constituted another set of NILs for the LMW-GS/gliadins. The three L-19 NILs were grown in the wheat breeding nursery in 2007 and 2008. The field experiments were designed using the three-column contrast arrangement method with four replicates. The three lines were ranked as follows for measurements of gluten strength, which was determined by the gluten index, Zeleny sedimentation, the stability and breakdown time of the farinogram, the maximum resistance and area of the extensogram, and the P andWvalues of the alveogram: L-19-613 > L-19-626 > L-19. The parameters listed above were significantly different between lines at the 0.05 or 0.01 level. The Glu-D1 and Glu-A3/Gli-A1 loci had additive effects on the gluten index, Zeleny sedimentation, stability, breakdown time, maximum resistance, area, P and W values. Although genetic variation at the Glu-A3/Gli-A1 locus had a great influence on wheat quality, the genetic difference between Glu-D1d and Glu-D1a at the Glu-D1 locus was much larger than that of Glu-A3c/Gli-A1? and Glu-A3e/Gli-A1m at the Glu-A3/Gli-A1 locus. Glu-D1d had negative effects on the extensibility and the L value compared with Glu-D1a. In contrast, Glu-A3c/Gli-A1? had a positive effect on these traits compared with Glu-A3e/Gli-A1m.
Authors:L. Wei, S.G. Bai, X.J. Hou, J.M. Li, B. Zhang, W.J. Chen, D.C. Liu, B.L. Liu, and H.G. Zhang
Among 20 awnless Tibetan wheat cultivars analyzed by SDS-PAGE, the migration rate of an HMW-GS in XM001584 and XM001593, named 1BX23*. was shown to be slightly faster than 1Bx6. and slower than Bx7. Its nucleotide sequence was isolated based on homology clones. In a phylogenetic tree of 1Bx genes, 1Bx23* was apparently clustered with 1Bx23. Compared with 1Bx23. eight single nucleotide replacements caused four single amino acid replacements in 1Bx23*. The deletion of “G” at base pair 1463 and insertion of “A” at 1509 bps induced a 42-nucleotide frame shift. “GQRQQAGQWQRPGQ” was replaced by “DKGNRQDNGNDRDK”. The new segment cannot be found in other HMW-GSs, and it is very similar to a segment found in collagen. Moreover, an 18-nucleotide deletion made 1Bx23* six amino acids shorter than 1Bx23. The cultivar XM001593 had 28 chromosomes, which signifies that it was tetraploid wheat, and that the new HMW-GS 1Bx23* cannot be used directly for breeding in common wheat.
Authors:G.J. Ye, L. Wei, W.J. Chen, B. Zhang, B.L. Liu, and H.G. Zhang
Red coleoptile is an easily observed trait in Triticum aestivum and can provide some protection against stress. Here, TaMYB-A1 or TuMYB-A1, homologous to TaMYB-D1, which controls red coleoptile formation in the common wheat cultivar ‘Gy115’, was isolated from eight T. aestivum and 34 T. urartu cultivars. The genome sequence of TaMYB-A1 was 867 bp with an intron of 93 bp, which was similar to the MYBs regulating anthocyanin biosynthesis in T. aestivum but different from other MYB transcription factors regulating anthocyanin biosynthesis. TaMYB-A1 had an integrated DNA-binding domain of 102 amino acids and a transcriptional domain of 42 amino acids, which was responsible for regulating anthocyanin biosynthesis. TaMYB-A1 was assigned to the same branch as the MYBs regulating anthocyanin biosynthesis in a phylogenetic tree. A transient expression analysis showed that TaMYB-A1 induced ‘Opata’ coleoptile cells to synthesize anthocyanin with the help of ZmR. A non-functional allele of TaMYB-a1 existed in common wheat cultivars containing rc-a1. One single nucleotide was deleted 715 bp after the start codon in TaMYB-a1 compared with TaMYB-A1. The deletion caused a frame shift mutation, destroyed the DNA transcription activator domain, and resulted in TaMYB-a1 losing its ability to regulate anthocyanin biosynthesis in ‘Opata’ coleoptile cells. Those cultivars with functional TaMYB-A1 or TuMYB-A1 have red coleoptiles. The isolation of TaMYB-A1 should aid in understanding the molecular mechanisms of coleoptile traits in T. aestivum.
Authors:Y.Q. Wang, X.J. Hou, B. Zhang, W.J. Chen, D.C. Liu, B.L. Liu, and H.G. Zhang
Red coleoptile is an easily observed agronomic trait of wheat and has been extensively studied. However, the molecular mechanism of this trait has not yet been revealed. In this study, the MYB gene TaMYB-D1 was isolated from the wheat cultivar ‘Gy115’, which possesses red coleoptiles. This gene resided at the short arm of the homoelogous group 7 chromosomes. TaMYB-D1 was the only gene expressed in the coleoptiles of ‘Gy115’ and was not expressed in ‘Opata’ and ‘CS’, which have uncoloured coleoptiles. Phylogenetic analysis placed TaMYB-D1 very close to ZmC1 and other MYB proteins regulating anthocyanin biosynthesis. The encoded protein of TaMYB-D1 had an integrated DNA binding domain of 102 amino acids and a transcription domain with 42 amino acids, similar to the structure of ZmC1. Transient expression analysis in onion epidermal cells showed that TaMYB-D1 was located at the plant nucleus, which suggested its role as a transcription factor. The expression of TaMYB-D1 was accompanied with the expression of TaDFR and anthocyanin biosynthesis in the development of the coleoptile of ‘Gy115’. Transient expression analysis showed that only TaMYB-D1 induced a few ‘Opata’ coleoptile cells to synthesize anthocyanin in light, and the gene also induced a colour change to red in many cells with the help of ZmR. All of these results suggested TaMYB-D1 as the candidate gene for the red coleoptile trait of ‘Gy115’.
Authors:J. Shao, Y. Yang, B. Li, L. Zhang, Y. Chen, and X. Liu
Two compounds of antimony trichloride and bismuth trichloride with valine are synthesized by solid phase synthesis at room
temperature. Their compositions, determined by element analysis, are Sb(C5H10O2N)3·2H2O and Bi(C5H10O2N)2Cl·0.5H2O. The crystal structure of antimony complex with valine belongs to triclinic system and its lattice parameters are: a=0.9599 nm, b=1.5068 nm, c=1.9851 nm, α=92.270, β=95.050, γ=104.270. The crystal structure of bismuth complex with valine belongs to monoclinic system
and its lattice parameters are: a=1.6012 nm, b=1.8941 nm, c=1.839 nm, β=99.73°. The far-infrared spectra and infrared spectra show that the amino group and carboxyl of valine may be
coordinated to antimony and bismuth, respectively, in two compounds. The TG-DSC results also reveal that the complexes were
Authors:J. Zhang, Z. Tan, Q. Meng, Q. Shi, B. Tong, and S. Wang
The heat capacities (Cp,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range
from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at
350.426 K. The melting temperature (Tm), the molar enthalpy (ΔfusHm0), and the molar entropy (ΔfusSm0) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol−1 and 51.676 J K−1 mol−1, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation.
The thermodynamic functions (HT-H298.15 and ST-S298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔUc(C6H8N2,cr)= −3500.15±1.51 kJ mol−1 and ΔcHm0 (C6H8N2,cr)= −3502.64±1.51 kJ mol−1, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, ΔrHm0 (C6H8N2,cr)= −1.74±0.57 kJ mol−1.
Authors:X.-L. Zhou, Y. Yang, Z.-F. Li, B.-H. Wang, and Y.-M. Zhang
The effects of cisplatin and its trans isomer transplatin on the thermal denaturation of G-actin were studied with a Micro DSC-III differential scanning calorimeter. The denaturation enthalpy of G-actin was found to be 12 J g–1, and the denaturation temperature was 328 K. The thermal denaturation curve showed that increasing cisplatin concentration decreased the enthalpy change. However, after the ratio of cisplatin to G-actin attained 8:1 (mol:mol), the denaturation enthalpy no longer decreased. Transplatin decreased the enthalpy change more rapidly. In contrast with cisplatin, the denaturation peak at 328 K disappeared, and a strong exothermic peak appeared at 341 K when the ratio of transplatin to G-actin was 8:1 (mol:mol). The enthalpy change was 75 J g–1, which is far in excess of the range of weak interactions. This strong exothermic phenomenon probably reflects the agglutination of protein. The effects of cisplatin and transplatin on the number of the free thiol groups of G-actin are discussed.
Authors:F. Z. Yin, W. Yin, X. Zhang, T. L. Lu, and B. C. Cai
The ripe fruits of Schisandrae chinensis have a long history of use in traditional Chinese medicine to treat diseases and improve health. There is substantial evidence that lignan constituents are mainly responsible for the beneficial effects of this plant medicine. The amounts of the major bioactive lignans in this plant vary widely with species, habitat, and the collecting time, and as such, establishment of an HPLC fingerprint for quality control of this herbal medicine is of particular importance. To achieve this, ten batches of Fructus schisandrae chinensis were collected from Tieli, in China, and their chemical components were analyzed under optimized HPLC conditions. On the basis of the chromatographic data, a consistent HPLC fingerprint pattern containing 20 common peaks was obtained. Among these common peaks, six were identified as schizandrin, schizandrol B, schisantherin, deoxyschiandrin, γ-schizandrin B, and schizandrin C. On the basis of this HPLC fingerprint and principal-components analysis, the quality of fifteen samples from different producing areas of China was objectively assessed, and the species difference between Fructus schisandrae sphenantherae and Fructus schisandrae chinensis was clearly differentiated. To summarize, the data described in this study offer valuable information for quality control and proper use of Fructus schisandrae chinensis.
Authors:X. Geng, Y. Wu, B. Wang, H. Zhang, X. Geng, and J. Xing
microcalorimetric determination of displacement adsorption enthalpies ΔH and measurement of adsorbed amounts of guanidine
– denatured lysozyme (Lys) refolding on the surface of hydrophobic interaction
chromatography (HIC) packings at 308 K were carried out and compared with
that at 298 K. Study shows that both temperature and concentration of guanidine
hydrochloride (GuHCl) affect the molecular mechanism of hydrophobic interaction
of protein with adsorbent based on the analysis of dividing ΔH values into three kinds of enthalpy fractions.
The adsorption in higher concentrations of GuHCl (>1.3 mol L–1)
at 308 K is an enthalpy-driving process, and the adsorption under other GuHCl
concentrations is an entropy-driving process. The fact that the Lys denatured
by 1.8 mol L–1 GuHCl forms a relatively stable
intermediate state under the studied conditions will not be changed by temperature.