Search Results

You are looking at 31 - 40 of 74 items for

  • Author or Editor: W. Liu x
  • All content x
Clear All Modify Search

Abstract

Bis(1-octylammonium) tetrachlorocuprate (1-C8H17NH3)2CuCl4(s) was synthesized by the method of liquid phase reaction. The crystal structure of the compound has been determined by X-ray crystallography. The lattice potential energy was obtained from the crystallographic data. Molar enthalpies of dissolution of (1-C8H17NH3)2CuCl4(s) at various molalities were measured at 298.15 K in the double-distilled water by means of an isoperibol solution-reaction calorimeter, respectively. In terms of Pitzer's electrolyte solution theory, the molar enthalpy of dissolution of (1-C8H17NH3)2CuCl4(s) at infinite dilution was determined to be and the sums of Pitzer's parameters and were obtained.

Restricted access

Youzimai is a widespread wheat landrace and has been used extensively in breeding programs in China. In order to assess the genetic variation between and within Youzimai accessions, samples of 31 landrace accessions of wheat, all called ‘Youzimai’, were collected from 6 geographic regions in China and evaluated using morphological traits, seedling resistance to powdery mildew, gliadin and microsatellite markers. Typical differences among accessions were observed in morphological characteristics. Forty-five (58.4%) of 77 assayed SSR markers showed polymorphism over the entire collection and total 226 alleles were identified with an average of 5.02 alleles per locus. SSR data indicated that the accessions from Hebei province were the most diverse, as evidenced by greatest number of region-specific alleles and highest diversity index. These accessions, therefore, probably experienced the most substantial morphological and molecular evolution as a result of various natural and anthropomorphic influences. On the other hand, differentiation in gliadin phenotypes was found among seeds within 80.6% of total accessions and average 61.5% of entire collections showed heterogeneous and comprised resistant plants in reaction to powdery mildew, suggesting the presence of a wide diversity within the wheat landrace. By developing an intimate knowledge of the available wheat genotypes, appropriate selections can be made for commercial application in order to conserve and exploit the diversity of the wheat landraces.

Restricted access

Patrinia scabra Bunge has long been used in clinic as a traditional Chinese medicine for treating leukemia and cancer and regulating host immune response. Despite their wide use in China, no report on system analysis on their chemical constituents is available so far. The current study was designed to profile the fingerprint of ethyl acetate extract of it, and in addition, to characterize the major fingerprint peaks and determine their quantity. Therefore, a detailed gradient high-performance liquid chromatography was described to separate more than 30 compounds with satisfactory resolution in P. scabra Bunge. Based on the chromatograms of 10 batches samples, a typical high-performance liquid chromatographic (HPLC) fingerprint was established with 23 chromatographic peaks being assigned as common fingerprint peaks. Furthermore, a quadrupole time of flight mass spectrometry (Q-TOF/MS) was coupled for the characterization of major compound. As (+)-nortrachelogenin was the most predominant compound in P. scabra Bunge, the quantification on it was also carried out with the method being validated. As a result, (+)-nortrachelogenin was found to be from 1.33 to 2.21 mg g−1 in this plant material. This rapid and effective analytical method could be employed for quality assessment of P. scabra Bunge, as well as pharmaceutical products containing this herbal material.

Open access

Summary

10-O-(N,N-dimethylaminoethyl)-ginkgolide B (XQ-1) is an intermediate for synthesizing 10-O-(N,N-dimethylaminoethyl)-ginkgolide B methanesulfonate (XQ-1H), which is a novel ginkgolide B derivative and is being developed as a platelet-activating factor antagonist. A specific and rapid liquid chromatographic method was developed for the quantitative analysis of XQ-1 and its three related impurities, which were 10-O-(N,N-dimethylaminoethyl)-11,12-seco-ginkgolide B (imp-1), 10-O-(N,N-dimethylaminoethyl)-11,12-seco-3,14-dehydroginkgolide B (imp-2) and 10-O-(N,N-dimethylaminoethyl)-3,14-dehydroginkgolide B (imp-3) simultaneously in XQ-1 samples. Chromatographic separation was achieved on a CN band stationary phase, with the mobile phase consisting of methanol and 20 mM dipotassium hydrogen phosphate (pH 7.5) (50:50, υ/υ) in isocratic elution. The flow rate was 1.0 mL min−1 and detector was set at 220 nm. The method was optimized by the analysis of the samples generated during the forced degradation studies. The XQ-1, imp-1, imp-2, and imp-3 were completely separated within 15 min. The resolutions (R s) amongst four target compounds were >2. The developed method was validated with respect to specificity, linearity, accuracy, precision, and robustness. The results indicated that the simultaneous LC determination method was readily utilized as a quality control method for XQ-1 sample.

Restricted access

Summary

A preparative high-speed countercurrent chromatograph (HSCCC) method for the isolation and purification of C6-C2 natural alcohol and benzyl ethanol from Forsythia suspensa was successfully established. Cornoside, forsythenside F, forsythiaside, and acteoside were rapidly obtained for the first time by HSCCC with a two-phase solvent system ethyl acetate-n-butanol-methanol-water (5:1:0.5:5, υ/υ) in one-step separation. The purities of them were all above 97% as determined by high-performance liquid chromatography, and the combination of ESI-MS and NMR analysis confirmed the chemical structures of the four compounds.

Restricted access

Summary

A simple and rapid HPLC method using a photodiode array (PDA) detector for the analysis of 3-hydroxycarboplatin and its related complex has been established for the first time. Separation of 3-hydroxycarboplatin and 3-hydroxy-1,1-cyclobutanedicarboxylic acid (3-HO-cbdca) was carried out on a Phenomenex ODS3 column using an aqueous solution containing 50 mM ammonium acetate and 5 mM sodium 1-octanesulfonate as the mobile phase. The flow rate was 0.8 mL min−1, the column temperature was 40°C, and the detection wavelength was 230 nm for 3-hydroxycarboplatin and 220 nm for 3-HO-cbdca. Different analytical performance parameters such as precision, accuracy, linearity, stability of the solution, specificity, limit of detection (LOD), limit of quantification (LOQ), and system suitability were determined using the Empower 2 software. The calibration curve of standard 3-hydroxycarboplatin showed good linearity (r = 0.9995) within the range 0.5–1.4 mg mL−1. The method was accurate and precise, with an average accuracy of 100.4% (RSD = 1.53%, n = 9), and the results of the system suitability test showed symmetrical peaks, good resolution (R s), and repeatability. It can be applied to the quality control of 3-hydroxycarboplatin.

Restricted access

Summary

Radix Isatidis has widely useful activities including anti-virus, anti-bacterial. Tryptanthrin, indigo, and indirubin are active ingredients in R. Isatidis. Response surface methodology (RSM)-optimized infrared-assisted extraction (IRAE) was developed and combined with HPLC for simultaneous determination of tryptanthrin, indigo, and indirubin from R. Isatidis. IRAE were investigated through extraction yields of the three components and optimized by RSM. The optimum conditions were as follows: infrared power of 129 W, solid/liquid ratio of 1:40 g/mL, and irradiation time of 22.5 min. IRAE conditions obtained by RSM were not only accurate, but also had practical value reflecting the expected optimization. Subsequently, this novel IRAE method was evaluated by extraction yield of the components of R. Isatidis samples from different regions. Compared with common extraction methods including maceration extraction (ME), reflux extraction (RE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), IRAE showed higher yield with advantages of no limitation of solvent selection, low cost, convenience under optimum extraction conditions. These results suggested the potential of RSM-optimized IRAE for extraction and analysis of the water-/fat-soluble compositions of Chinese herbal medicine. A simple chromatographic separation for simultaneous determination of tryptanthrin, indigo, and indirubin from Chinese herbal medicine R. Isatidis was performed on a C18 column (Diamonsil 150 mm × 4.6 mm i.d., 5 μm) with a mobile phase isocratic consisting of methanol and water at a flow-rate of 0.8 mL min−1. The retention times of tryptanthrin, indigo, and indirubin were 15.4, 31.9, and 58.6 min, respectively. The linear equations were obtained as follows: y = −3094.5744 + 21208.792x for tryptanthrin (R = 0.9998, 0.9–18.0 μg mL−1), y = 4730.0448 + 30180.567x for indigo (R = 0.9997, 0.5–10.0 μg mL−1) and y = −6582.9045 + 67069.312x for indirubin (R = 0.9997, 0.4–8.0 μg mL−1). The result showed that RSM-optimized IRAE was a simple, efficient pretreatment method for the analysis of complex matrix.

Restricted access

Summary

Oroxylin A (5,7-dihydroxy-6-methoxyflavone), which has showed multiple pharmacological effects, was semi-synthesized chemically as a pharmaceutical agent. Its impurities, degradation products and their formation pathways remain unknown. In the present study, two impurities (5,6,7-trihydroxyflavone, 5-hydroxy-6,7-dimethoxytlavone) and a degradation product (5,7-dihydroxy-8-methoxyflavone) in Oroxylin A bulk drug substance were identified, and their formation pathways were proposed. A reversed phase liquid chromatographic method for the simultaneous determination of Oroxylin A and the three compounds was developed on a C18 column using methanol-acetonitrile-0.1% acetic acid (54:23:23, v/v/v) as the mobile phase. The detection was performed at 271 nm. The method was validated to be robust, precise, specific and linear between 4 and 40 μg mL−1; the limits of detection and quantification of Oroxylin A were 0.01 and 0.04 μg mL−1, respectively. The developed method was found to be suitable to check the quality of bulk samples of Oroxylin A at the time of batch release and also during its stability studies (long term and accelerated stability).

Restricted access

Abstract

Phase behavior of dodecane–tetradecane (n-C12H26–C14H30, n-C12–C14) binary system in bulk and confined in SBA-15 (pore diameters 8 nm; 15.9 nm) has been investigated by differential scanning calorimetry and transmission electron microscopy. The bulk system possesses some special phases relating to the rotator phase in normal alkanes. Dodecane–tetradecane mixtures confined in SBA-15 (8 nm) are a system miscible both in solid and liquid states with a phase diagram of a smooth curve. Dodecane–tetradecane system confined in SBA-15 (15.9 nm) exhibits not only solid–liquid (s–l) in all compositions but solid–solid transition in mole fractions of tetradecane 0.1–0.6, which forms a phase diagram of “loop line” shape. Melting temperatures of n-C12–C14/SBA-15 (8 nm) are lower than those of n-C12–C14/SBA-15 (15.9 nm) in all mole fractions. The evolution of the phase diagram of n-C12–C14 confined in 8 nm, 15.9 nm pore sizes of SBA-15 and in bulk, respectively, shows a dramatic effect of confinement on phase behavior of normal alkane mixtures. The s–l phase boundary lines of n-C12–C14/SBA-15 (8, 15.9 nm) are fitted as being [], where D is a polynomial ∑ a i x i, i = 1, 2,···, n (A = C14, B = C12).

Restricted access

Abstract  

Occupational exposure to Cr(VI) causes various effects including deep skin ulcerations. Its action mechanisms are not fully understood. In the present study, the evaluation of human dermal fibroblasts heat production was monitored, using microcalorimetry. as part of Cr(VI) toxicity. In control cells, normal heat production was 15±5 pW/cell. Regardless of the Cr(VI) concentration tested (0 to 500 μM), heat production was inhibited over time periods ranging from 3 to 25 h. These results could be correlated with cell mortality and the IC50 for Cr(VI) was 29±4 μM. In the WST-1 bioassay, the IC50 was 35±5 μM (no statistical difference). Thus, Cr(VI) altered the metabolism of the fibroblasts, and led to cellular death. Microcalorimetry can be a useful tool for determining the toxic effect of suspect compounds implicated in the occurrence of pathologies.

Restricted access