A high-performance liquid chromatography (HPLC) method has been developed for simultaneous determination of six alkaloids, i.e., (−)-(R)-platydesmin, noroxyhydrastinine, berberine, skimmianine, canthin-6-one, and pteleine in the herbal medicine of Phellodendron amurense Rupr. The optimal condition for extraction and separation was achieved with a linear mobile phase gradient prepared from 0.1% phosphoric acid and acetonitrile. The LODs and LOQs for the analytes ranged from 0.06 to 0.22 μg mL−1 and from 0.25 to 0.80 μg mL−1, respectively. The optimized method was applied to the determination of alkaloids in P. amurense Rupr. and was found to be efficient. This method can provide a scientific and technical platform to the manufacturers for setting up a quality control standard as well as to the public for quality and safety assurance of the proprietary traditional Chinese medicines.
Authors:Z. Xiao, D. Liu, C. Wang, Z. Cao, X. Zhan, Z. Yin, Q. Chen, H. Liu, F. Xu, and L. Sun
The effect of mechanical alloying on Zn-Sb alloy system is investigated with X-ray diffraction (XRD), laser grain size analysis
and differential scanning calorimetry (DSC) respectively. The results of laser particle size analysis shows that the particle
size decreases with increasing of the grinding time between 0 and 24 h. XRD and DSC results indicate that longer the grinding
time of Zn-Sb is, the more content of Zn4Sb3 become in the product in this process.
Authors:W. Zhou, X. Y. Zhang, Y. P. Lv, X. D. Liu, C. Xu, and G. L. Duan
Radix Isatidis has widely useful activities including anti-virus, anti-bacterial. Tryptanthrin, indigo, and indirubin are active ingredients in R. Isatidis. Response surface methodology (RSM)-optimized infrared-assisted extraction (IRAE) was developed and combined with HPLC for simultaneous determination of tryptanthrin, indigo, and indirubin from R. Isatidis. IRAE were investigated through extraction yields of the three components and optimized by RSM. The optimum conditions were as follows: infrared power of 129 W, solid/liquid ratio of 1:40 g/mL, and irradiation time of 22.5 min. IRAE conditions obtained by RSM were not only accurate, but also had practical value reflecting the expected optimization. Subsequently, this novel IRAE method was evaluated by extraction yield of the components of R. Isatidis samples from different regions. Compared with common extraction methods including maceration extraction (ME), reflux extraction (RE), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), IRAE showed higher yield with advantages of no limitation of solvent selection, low cost, convenience under optimum extraction conditions. These results suggested the potential of RSM-optimized IRAE for extraction and analysis of the water-/fat-soluble compositions of Chinese herbal medicine. A simple chromatographic separation for simultaneous determination of tryptanthrin, indigo, and indirubin from Chinese herbal medicine R. Isatidis was performed on a C18 column (Diamonsil 150 mm × 4.6 mm i.d., 5 μm) with a mobile phase isocratic consisting of methanol and water at a flow-rate of 0.8 mL min−1. The retention times of tryptanthrin, indigo, and indirubin were 15.4, 31.9, and 58.6 min, respectively. The linear equations were obtained as follows: y = −3094.5744 + 21208.792x for tryptanthrin (R = 0.9998, 0.9–18.0 μg mL−1), y = 4730.0448 + 30180.567x for indigo (R = 0.9997, 0.5–10.0 μg mL−1) and y = −6582.9045 + 67069.312x for indirubin (R = 0.9997, 0.4–8.0 μg mL−1). The result showed that RSM-optimized IRAE was a simple, efficient pretreatment method for the analysis of complex matrix.
Authors:K. Inn, Zhichao Lin, Zhongyu Wu, C. McMahon, J. Filliben, P. Krey, M. Feiner, Chung-King Liu, R. Holloway, J. Harvey, I. Larsen, T. Beasley, C. Huh, S. Morton, D. McCurdy, P. Germain, J. Handl, M. Yamamoto, B. Warren, T. Bates, A. Holms, B. Harvey, D. Popplewell, M. Woods, S. Jerome, K. Odell, P. Young, and I. Croudace
In 1977, the Low-level Working Group of the International Committee on Radionuclide Metrology met in Boston, MA (USA) to define the characteristics of a new set of environmental radioactivity reference materials. These reference materials were to provide the radiochemist with the same analytical challenges faced when assaying environmental samples. It was decided that radionuclide bearing natural materials should be collected from sites where there had been sufficient time for natural processes to redistribute the various chemically different species of the radionuclides. Over the succeeding years, the National Institute of Standards and Technology (NIST), in cooperation with other highly experienced laboratories, certified and issued a number of these as low-level radioactivity Standard Reference Materials (SRMs) for fission and activation product and actinide concentrations. The experience of certifying these SRMs has given NIST the opportunity to compare radioanalytical methods and learn of their limitations. NIST convened an international workshop in 1994 to define the natural-matrix radionuclide SRM needs for ocean studies. The highest priorities proposed at the workshop were for sediment, shellfish, seaweed, fish flesh and water matrix SRMs certified for mBq per sample concentrations of 90 Sr, 137 Cs and 239 Pu + 240 Pu. The most recent low-level environmental radionuclide SRM issued by NIST, Ocean Sediment (SRM 4357) has certified and uncertified values for the following 22 radionuclides: 40 K, 90 Sr, 129 I, 137 Cs, 155 Eu, 210 Pb, 210 Po, 212 Pb, 214 Bi, 226 Ra, 228 Ra, 228 Th, 230 Th, 232 Th, 234 U, 235 U, 237 Np, 238 U, 238 Pu, 239 Pu + 240 Pu, and 241 Am. The uncertainties for a number of the certified radionuclides are non-symmetrical and relatively large because of the non-normal distribution of reported values. NIST is continuing its efforts to provide the ocean studies community with additional natural matrix radionuclide SRMs. The freeze-dried shellfish flesh matrix has been prepared and recently sent to participating laboratories for analysis and we anticipate receiving radioanalytical results in 2000. The research and development work at NIST produce well characterized SRMs that provide the world's environment-studies community with an important foundation component for radionuclide metrology.