Search Results

You are looking at 91 - 100 of 137 items for :

  • "relative humidity" x
  • Chemistry and Chemical Engineering x
  • All content x
Clear All
Acta Chromatographica
Authors: Jong-Woo Jeong, Yun-Hwan Seol, Hun-Chan Hyun, Hye-Rim Kim, Jong-Hwa Lee, Young-Dae Gong, Nam Sook Kang, and Tae-Sung Koo

relative humidity of 40–60%. Prior to dosing, animals were fasted for 14 h but were allowed access to water. After dosing, food was provided after a further 4 h. Supinoxin was dissolved in a mixture containing 10% dimethyl sulfoxide, 40% polyethylene glycol

Open access

at a rate of 5 °C per minute. TG data were collected every 4 s. During analyses, the furnace and the sample were purged with the constant air stream of 76% relative humidity at 25 °C and flow rate of 200 ml min −1 . To ensure comparable

Restricted access

Treatment of water-induced curvature of the DSC heat flow rate signal

Applied to fractionated nucleation of polypropylene dispersed in water

Journal of Thermal Analysis and Calorimetry
Authors: Julen Ibarretxe, Gabriël Groeninckx, and Vincent B. F. Mathot

relative humidity or the deviation from the equilibrium conditions) and calculate the total heat flow as the summation of the heat flow due to the evaporation and of the heat flow due to the temperature increase of the sample (through the heat capacity of

Restricted access

fuel (loading, size, and moisture), climate conditions (temperature, relative humidity, rainfall and wind) and topographic conditions (slope and altitude) [ 4 ]. Obviously, these parameters have considerable influences on the fire duration, and

Restricted access

thermomechanical samples Ann tannins alone and in mixture with different hardeners were tested dynamically by a thermomechanical analysis (TMA) using plies of total dimensions of 21 × 6 × 0.6 mm, and relative humidity of 8–12% were bonded with the resin

Restricted access

. Results and discussion Thermal stability of sound and archaeological woods TG experiments were performed on the wood samples equilibrated at relative humidity (RH) of 50% and room temperature; the waterlogged woods were dried at

Restricted access

.03 ∗Insoluble residue + SiO 2 Methods The CC were cast into the 20 × 20 × 20 mm cubes. The moulds were stored at an atmosphere with 95% relative humidity at 20 ± 1 °C for the first 24 h and

Restricted access

activity, nutrient level, and extrinsic factors, such as temperature, atmosphere (i.e., aerobic, anaerobic, and modified atmosphere), and relative humidity. By manipulating one or more of these factors, it is possible to alter the behavior of microorganisms

Restricted access

storage. The cleaned samples were conditioned under standard atmospheric pressure at 65 ± 4% relative humidity and 20 ± 2 °C for at least 24 h before all the experiments. APTES (sol–gel precursor) and DEPTES were purchased from Sigma Aldrich and Gelest

Restricted access

and 22 °C and relative humidity (RH) ranged between 65 and 67%. The similar procedure is described in DOC FF 3-71 [ 27 ]. The full description of our flammability tester has been demonstrated in the previous investigations [ 28 – 38

Restricted access