Search Results

You are looking at 11 - 20 of 2,204 items for :

  • "treatment" x
  • Chemistry and Chemical Engineering x
  • All content x
Clear All

structure [ 18 , 19 ]. The synthesis of the copper ferrite was achieved by mechanical milling of the precursors oxides followed by annealing treatment [ 20 ]. This article presents results of the investigation of the influence of the heat treatments

Restricted access

promising natural fiber composites industry. Many studies have been conducted to address this problem and overcome this obstacle. Various fiber pre-treatments and coupling agents have been used to enhance the fiber-matrix interface. Bledzki et al. [ 1 ] have

Restricted access

Introduction Heat treatment is a routine operation in food production since it effectively destroys microorganisms that cause spoilage in food, thereby increasing the shelf life of products. At the same time, high temperatures may have a negative

Open access

nanotubes are still topics under discussion. Kasuga et al. [ 3 ] concluded that titania nanotubes were produced after hydrothermal reaction and washing the alkali-treated specimen with water followed by a further treatment with HCl. Zhang et al. [ 6 ] found

Restricted access

Abstract  

The uptake of137Cs and90Sr/90Y onto Syrian bentonite has been studed, using batch and column tracer techniques in order to investigate its utilization for aqueous radioactive effluent treatment. Parameters influencing the percent uptake considered and studied in this work are: nuclide concentration, pH of the aqueous phase, heat treatment and particle size. Leaching experiments using natural sea and ground waters were carried out on bentonite/cement composites. They demonstrated the effectiveness of calcination and cement containment.

Restricted access

Abstract  

H2SO4 and HCl processes accompanied by thermal treatments at different stages are described for the industrial extraction of alumina from lateritic clay minerals, especially from kaolinite, an important component of lateritic bauxites. The effects of calcination at high temperatures on the pretreatments of the raw lateritic materials, as well as on the thermal transformations of the products (salts) resulting from the acid treatments of lateritic bauxites are analyzed. Beside energetic considerations, separation methods of Al from Fe and from other lateritic-metallic components are emphasized in the extraction and purification processes. The mechanism of a controlled HCl-extracting treatment performed on iron-bearing kaolinite is described, as well as its characterization by IR and DTA ad hoc methods, enabling to distinguish between Al and Fe in the structure of lateritic kaolinite. The location and quantification of Al in the structure of lateritic goethite is also considered.

Restricted access
Progress in Agricultural Engineering Sciences
Authors: István Dalmadi, Dávid Kántor, Kai Wolz, Katalin Polyák-Fehér, Klára Pásztor-Huszár, József Farkas, and András Fekete

., Berg, R. (2003) Combined high-pressure and thermal treatments for processing of tomato puree: evaluation of microbial inactivation and quality parameters, Innovative Food Science and Emerging Technologies , 4, 377

Restricted access

treatment stabilization must be used ( Bengoechea et al., 2010 ). Hen egg yolk is an ideal example of natural supramolecular assemblies of lipids and proteins with different organization levels. These assemblies are mainly due to interactions between

Open access
Progress in Agricultural Engineering Sciences
Authors: Tamás Zsom, Petra Polgári, Lien Phuong Le Nguyen, Géza Hitka, and Viktória Zsom-Muha

materials, or ethylene scavenging agents) could serve effectively for these purposes. 1-MCP (1-methyl-cyclopropene) application as a novel postharvest treatment ( Blankenship & Dole, 2003 ) is proved to be effective against undesired postharvest ripening of

Open access

Abstract  

Heat treatment of pipes was performed under industrial conditions at 580C in a dry protective gas containing a CO2–CO–H2–N2 mixture. A commercial adsorbent (733 kg) used for production ofthe gas removed 52.7 l of water in five h and 22.5 min. During the annealing of pipesoxidation and decarburization were not observed. The results were confirmed bymetallographic analysis. The values of enthalpy of water desorption (36.4–40.5 kJ mol–1) obtained by DSC and TG measurements were close to those of water evaporation(44.1 kJ mol–1). This suggests that the bonds between the water molecules andadsorbents were not of chemical but of physical nature.

Restricted access