Authors:Y. C. Chu, J. R. Chen, J. M. Tseng, L. C. Tsai, and C. M. Shu
DTBP, such as temperature and pressure traces versus time. The heat-wait-search (H-W-S) method for detecting the self-heating rate was employed. If the self-heating rate was greater than 0.1 °C min −1 , the H-W-S and main heater would be immediately
and at the same time to decrease the self-heating an approach based on significant ballasting (“dilution”) of the reactant was proposed. Two methods of dilution were developed: “mechanical” and “thermal”. The basic experimental scheme and cells used in
Authors:Kun-Yue Chen, Wei-Ting Chen, Chen-Wei Chiu, Tsung-Chih Wu, and Chi-Min Shu
]. Under the experimental conditions, if the self-heating rate exceeds 0.2 °C min −1 , and the heat-wait-search mode is terminated and the instrument enters adiabatic (AK) mode.
In AK mode, the main heater directly to the test cell is switched off
, over a long time, an abrupt self-heating of the resultant liquid started. In essence, exothermic decomposition reactions can begin when the solid and liquid phases coexist on one container [ 12 ].
Another parameter for determining thermal
Authors:E. L. Charsley, P. G. Laye, G. M. B. Parkes, and J. J. Rooney
achieve this, a low rate of heating has been used in the final stages. The chosen target rate has extended the oxidation reaction over a period of more than 2 h effectively eliminating self-heating problems. Thus, the technique offers the possibility of
Authors:Sridhar Vethathiri Pakkirisamy, Surianarayanan Mahadevan, Sivapirakasam Suthandathan Paramashivan, and Asit Baran Mandal
followed by a seek or search period. Again during this period (typically 20 min) no heat was provided by the radiant heater, and any temperature drift, upwards or downwards, is observed. If there was upward temperature drift, it was caused by a self-heating
Authors:Seied Mahdi Pourmortazavi, Mehdi Rahimi-Nasrabadi, Iraj Kohsari, and Seiedeh Somayyeh Hajimirsadeghi
both compounds it was found that by increasing the heating rate, the decomposition temperature peaks of the KNF and NTO were shifted to higher temperatures. Also, in order to investigate on self-heating effect, DSC experiments were obtained using three