Search Results

You are looking at 71 - 80 of 138 items for :

  • "relative humidity" x
  • Chemistry and Chemical Engineering x
  • All content x
Clear All

increases with increasing temperature. Relative humidity is the ratio in percentage between the absolute humidity and humidity at saturation: At saturation, p = P, and the relative humidity is 100%. For example, a pure cotton paper in a

Restricted access
Journal of Thermal Analysis and Calorimetry
Authors: Robson Miranda da Gama, Tatiana Santana Balogh, Simone França, Tânia Cristina Sá Dias, Valcinir Bedin, André Rolim Baby, Jivaldo do Rosário Matos, and Maria Valéria Robles Velasco

30 s with 15.0% (w/v) sodium lauryl sulfate to remove impurities. All were wetted with warm (37.0 ± 5.0 °C) distilled water constant flow of 240.0 mL min −1 for 1 min and then dried at room temperature (22.0 ± 1.0 °C) and relative humidity (RH 60 ± 5

Restricted access

curing continuous at ambient (21 ± 1 °C and 54% of relative humidity) temperature for at least 28 days before characterization. Characterization of geopolymer materials Mineral phase content The

Restricted access

Artificial pozzolanic cement pastes containing burnt clay with and without silica fume

Physicochemical, microstructural and thermal characteristics

Journal of Thermal Analysis and Calorimetry
Authors: M. S. Amin, S. A. Abo-El-Enein, A. Abdel Rahman, and Khaled A. Alfalous

using one inch cubic molds. The molds, containing the pastes, were cured at 100% relative humidity for 24 h to attain the final setting, and then, the cubic specimens were removed from the molds and cured under water at room temperature for different

Restricted access

(Siglufjordur, Iceland). Dough mixer “MONO” (Swansea, UK) was used to make dough at two stirring rates during 10 min. The dough was allowed to proof for 25–30 min at 38 °C and relative humidity 72% and cut to pieces with weight 65 g. The rolls were baked in

Restricted access

and relative humidity (RH) of 90% for 24 h, the specimens were demolded and cured in lime-saturated water at 20 ± 1 °C, followed by the strength tests according to EN 196–1 [ 17 ]. Activity index of the fly ash used was calculated as the strength ratio

Restricted access

was in average temperature ranged between 20 and 22 °C and the relative humidity (RH) ranged between 65 and 67%. Method of evaluation Flammability test The vertical flame spread test method by

Restricted access

(INSTRON model 1405). Experiments were carried out at constant cross-head speed of 5 mm min −1 with relative humidity of 65% at 20 °C. Before subjecting the samples to analysis, dumbbell shaped samples of uniform width and thickness were made and analyzed

Restricted access

room temperature and relative humidity of about 50%. Fig. 1 Experimental set-up device Measurements DDSJ-308A intelligent conductivity

Restricted access

vapor adsorption onto poly (styrensulfonic acid), sodium salt has indicated that the adsorption capacity of the monosulfonated sample reached more than 80% mass under 80% relative humidity equilibrium and the heat of adsorption was about standard

Restricted access