Search Results

You are looking at 71 - 80 of 2,210 items for :

  • "treatment" x
  • Chemistry and Chemical Engineering x
  • All content x
Clear All

Abstract  

Li-, Na-, K-, Rb- and Cs-montmorillonites were saturated with benzidine, these organo-clay complexes heated under vacuum to 200°C and IR spectra recorded at various temperatures. Benzidine is mostly bound to interlayer cations through water molecules, except in Cs-clay where bonding to hydrophobic water and to water molecules which are hydrogen bonded to the oxygen plane predominates. During the thermal treatment water is lost and alkali, cations coordinate directly with benzidine. In Cs-, and to some extent also in Rb- and K-montmorillonite, benzidine is oxidized to semiquinone and quinoidal cation during the thermal treatment.

Restricted access

Abstract  

Five spices, cumin, coriander, clove, cinnamon and black pepper were irradiated by gamma-ray doses of 1.0 and 5.0 kGy and thermoluminescence (TL) method was used for identification of the irradiation treatment. The TL response of the minerals isolated from irradiated samples was much higher as compared to the mineral particles from unirradiated control samples. For the normalisation of results the separated minerals were reirradiated to a normalisation dose of 1.0 kGy and the TL glow curve was recorded a second time. By comparing the glow curves of irradiated and unirradiated samples, finding the ratio of the areas of first and second glow curves (TL1/TL2) and comparing the shapes of the glow curves, all the irradiated and unirradiated samples were identified correctly.

Restricted access

Abstract  

The solids formation behavior in a simulated high level liquid waste (HLLW) was experimentally examined, when the simulated HLLW was treated in the ordinary way of actual HLLW treatment process. Solids formation conditions and mechanism were closely discussed. The solids formation during a concentration step can be explained by considering the formation of zirconium phosphate, phosphomolybdic acid and precipitation of strontium and barium nitrates and their solubilities. For the solids formation during the denitration step, at least four courses were observed; formation of an undissolved material by a chemical reaction with each other of solute elements (zirconium, molybdenum, tellurium) precipitation by reduction (platinum group metals) formation of hydroxide or carbonate compounds (chromium, neodymium, iron nickel, strontium, barium) and a physical adsorption to stable solid such as zirconium molybdate (nickel, strontium, barium).

Restricted access

Abstract  

Mg-Al L(ayered) D(ouble) H(ydroxide) was prepared and its thermal behaviour was characterized by thermoanalytical methods (TG, DTG, DTA), 27Al M(agic) A(ngle) S(pinning) NMR spectroscopy, X-ray diffractometry (XRD) and S(canning) E(lectron) M(icroscopy). Heat treatment destroyed the layered structure, which could only be partially reconstituted by rehydration. On calcination mixed oxide with the predominance of basic sites were formed. Pillaring the LDH with Fe(CN)6 4- anions was also performed. The material was characterized by XRD and BET measurements. Heat stability of the pillared substance was investigated, too. Pillaring proved to be successful, however, decreased heat resistance was found in the intercalated material relative to the guest LDH.

Restricted access

Abstract  

The transformation mechanism of Fe cations in natural olivine after thermal treatments in air has been studied using mainly57Fe Mössbauer spectroscopy. -Fe2O3 nanoparticles appear as the primary Fe3+ phase in Mössbauer spectra of olivine samples heated at 600-900 °C. These nanoparticles are thermally unstable and they are transformed to -Fe2O3 with the increase of heating time. Another transformation mechanism of iron related with the complete decomposition of olivine structure has been observed at temperatures of 1000 °C and higher. The mixed oxide MgFe2O4 with the spinel structure and enstatite MgSiO3 were identified as iron-bearing decomposition products.

Restricted access

Abstract  

The resistance against radiation of the tertiary pyridine resins synthesized for the treatment of spent nuclear fuels and high level radioactive waste was evaluated. After irradiation at 10 MGy, only approximately 10% or less of the exchange groups were lost in HCl solutions regardless of their concentrations, while 3040% were lost in HNO3. The pyridine resin has shown remarkable resistance against radiation particularly in HCl solution. It has been revealed that the decomposition of pyridine type resins results from the scission of the principal chains. An irradiation study was conducted also on the quaternary ammonium resins. Quatemization ratio was found to be reduced in HNO3 solutions at 10 MGy irradiation.

Restricted access
Journal of Radioanalytical and Nuclear Chemistry
Authors: A. Palamalai, S. Mohan, M. Sampath, R. Srinivasan, P. Govindan, A. Chinnusamy, V. Raman, and G. Balasubramanian

Abstract  

Some batches of233U oxide product obtained from the reprocessing treatment of irradiated thorium rods, called J-rods in our plant, have been found to contain thorium as much as 85% and iron above 5% as impurities. This product has to be purified before sending for fabrication of the fuel. The present purification method consists of the following three steps: (1) preferential dissolution of U3O8 as compared to thoria, (2) a novel solvent extraction process, and (3) preferential precipitation of Th as oxalate leaving behind the entire U in the filtrate. Development and application of the present purification method to the above233U oxide proxduct are presented in this paper.

Restricted access

The phase changes in the solid state in E AlMgSi alloy are discussed. The dissolution and precipitation processes are investigated by DTA, and the results can be applied to control the technological parameters of dissolution heat treatments.

Restricted access

Abstract  

A pilot plant was developed for the reclamation and reuse of secondary effluent from a sewage treatment plant. The plant system consists of sand filtration, gamma-irradiation, ozonation and ion-exchange. Gamma-irradiation showed effective organic contaminant decomposition and this resulted in the reduction of 5-day biochemical oxygen demand (BOD5), color, chemical oxygen demand (CODCr) and total organic carbon (TOC). Ion-exchange significantly removed inorganic ions, and thus reduced total nitrogen (TN) and total phosphorus (TP). The average reduction in color, CODCr, BOD5, TOC, TN and TP, which was obtained after 12 operations, was 64, 52, 67, 61, 95 and 92%, respectively. Irrespective of applied radiation dose, the treated water fully satisfied the quality requirements of household water that can be used for all home uses except for drinking and human contact uses.

Restricted access

Summary New regenerated cellulose fibers were developed during the last decades as environmentally friendly systems. In this work, three fibers: lyocell, modal and viscose were subjected to an enzymatic treatment. Likewise, different lyocell fibers were washed in a Na2CO3 solution under severe conditions. Analysis was performed by means of differential scanning calorimetry, thermogravimetry and scanning electron microscopy. In all samples, at low temperature, water desorption was detected. Furthermore, thermal analysis shows wide exothermic processes that began between 250 and 300°C corresponding to the main thermal degradation and it is associated to a depolymerization and decomposition of the regenerated cellulose. It is accompanied with mass more than 60% mass loss. Kinetic analysis was performed and activation energy values 152-202 kJ mol-1 of the main degradation process are in agreement with literature values of cellulose samples.

Restricted access