Authors:Péter Bor, József Csanádi, Gábor Veréb, Sándor Beszédes, Zita Šereš, Zsuzsanna László, Cecilia Hodúr, and Szabolcs Kertész
, L. H. , Zhu , Z. , Wan , Y. , Jaffrin , M. Y. ( 2012 ) Treatment of dairy effluent by shear-enhanced membrane filtration: The role of foulants . Separation and Purification Technology , 96 : 194 – 203
Authors:Emna Ayari, Csaba Németh, Karina Ilona Hidas, Adrienn Tóth, Dávid Láng, and László Friedrich
products because they are easy to handle. Microbiological safety of liquid products is mainly guaranteed by pasteurization ( Lechevalier et al., 2017 ). Consequently, there are many standardizations of the heat-treatment. The USDA requires liquid egg
arranged randomly to form the bulk structure. Also apparent between the crystallites and grains were pores, into which electrolyte is expected to permeate during electrochemical discharge.
Heat treatment of γ-MnO 2
Heating and/or cooling of substances is one of the oldest and basic methods for preparing materials with defined properties.
This always leaves a definitive fingerprint of the thermal history. Beside knowing the structure we need to specify such materials
by their thermodynamic behaviour, i.e., stability/metastability, phase relations and transitions, particularly establishing
corresponding characteristic points. All this can be based on ordinary thermodynamics but its validity must be approved for
non-equilibrium conditions of temperature changes where equilibrium and kinetic effects overlap. The slower the phase transition
proceeds the greater is the deviation of the system state (kinetic curve) from its equilibrium state (equilibrium background).
This makes possible to locate the actual phase boundary between two states investigated, resulting in the so-called kinetic
phase diagrams. Most of modern technologies are intentionally based on non-equilibrium phenomena in order to create metastable/nonstable
phases of specific properties. In this sense thermal analysis is understand as the method for determining the sample state
on the basis of the sample interactions with the surroundings whose intensive parameters are controlled. Temperature is here
considered as a basic parameter that connects all thermophysical measurements and thermal treatments.
Authors:Gabor Zsivanovits, Dida Iserliyska, Maria Momchilova, Petya Sabeva, and Zarya Rankova
, China. Also, the food grade Ca-lactate and the sodium alginate was bought from Sigma Aldrich, Bulgaria. Treatments All of the fruit were selected without injury and with stalk, were carefully washed and dried before the experiments. Three types of
Authors:A. L. F. S. d'almeida, V. Calado, D. W. Barreto, and J. R. M. d'almeida
chemical and/or physical surface treatments were developed in order to guarantee a better fiber–matrix adhesion [ 2 , 3 ]. The evaluation of how effective a treatment is can be made by several methods, including scanning electron microscopy and mechanical
Authors:Florin Popa, Ionel Chicinaş, Olivier Isnard, and Viorel Pop
obtain higher machinability can be achieved by adding small amounts of copper and/or molybdenum to Ni–Fe alloys. By doing thus, one can obtain composition's range exhibiting high permeability which can be improved by annealing treatment. Such approach has
Authors:Mahmood Al Ramahi, Sándor Beszédes, and Gábor Keszthelyi-Szabó
, the high rate of fat adsorption may limit the transport of soluble substrates and consequently cause the conversion rate in the substrates to decrease ( Atallah et al., 2020 ). Anaerobic digestion (AD) has long been recognized as an effective treatment
Authors:Péter Korzenszky, Gábor Géczi, and Timea Kaszab
Introduction Heat treatment is a routine operation in food production since it effectively destroys microorganisms that cause spoilage in food, thereby increasing the shelf life of products. At the same time, high temperatures may have a negative