A two-year field experiment with a split-split plot design was conducted to investigate the effects of soil N(0, 120 and 240 kg N·ha−1) and foliar Zn applications at different growth stages (jointing, flowering, early grain filling, and late grain filling) on Zn translocation and utilization efficiency in winter wheat grown on potentially Zn-deficient soil. Our results showed that foliar Zn application at the early grain filling stage significantly increased the Zn concentration in the grain (by 82.9% compared to control) and the Zn utilization efficiency (by 49% compared to jointing). The Zn concentration in the straw consistently increased with the timing of the foliar Zn application and was highest at late grain filling. However, the timing of the Zn application had little effect on Zn uptake in the grain and straw. A high N supply significantly increased the Zn concentration in and uptake by grain and straw, but it had little effect on the efficiency of Zn utilization. Consequently, a foliar Zn application at early grain filling causes Zn to re-translocate into grain from vegetative tissues, resulting in highly nutritional wheat grain. Finally, these practices improved the efficiency of Zn utilization in winter wheat and led to Zn-enriched straw, which may contribute to Zn recycling if it is returned to the field. The results also indicated that N nutrition is a critical factor in both the concentration and translocation of Zn in wheat.
Authors:L. Zhang, X. Shu, X. Wang, H. Lu, Q. Shu, and D. Wu
Five giant embryo mutants, described as
MH-gel, MH-ge2, MH-ge3, MH-ge4
, which were derived from the same indica rice
. ‘Minghui 86’ and characterized by 2.0, 1.88, 2.08, 1.93 and 1.88 times enlarged embryo than that of wild type, were selected for the current study. The mutated giant embryos were controlled by a single recessive gene, and except mutated locus with
other four loci were allelic to each other and the previous reported locus
in japonica rice
. ‘Kinmaze’. No obvious differences in physicochemical properties such as apparent amylose content (AAC), alkali spreading value (ASV), gel consistency (GC), and starch paste viscosity were observed between giant embryo mutants and wild type. Significant increases in the contents of crude lipid (LC), crude protein (PC), Vitamin B1 (V
), Vitamin B2 (V
), Vitamin E (V
), essential amino acids such as Arginine (Arg), Aspartic acid (Asp), Glutamic acid (Glu), Lysine (Lys), Methionine (Met), and mineral elements such as calcium (Ca), iron (Fe), potassium (K), phosphorus (P) and zinc (Zn) were detected in brown rice (BR) of giant embryo mutants. The amounts of gamma aminobutyric acid (GABA), an inhibitory neurotransmitter, were similar in the BR of giant embryo mutants and wild type, and more GABA content was observed in germinated brown rice (GBR) than BR. Significant enrichments were detected in the GBR of giant embryo mutants, basically corresponding to the enlarged embryo.
Authors:F. Wang, H. Fan, D. Chen, H. Bai, Z. Chen, and L. Xiao
Radiolabeled somatostatin analogue is a useful ligand for scintigraphic imaging of somatostatin receptor-bearing tumors. In
this study, we investigated the effects of different radiolabeling conditions on labeling yield and ratio between mono-iodinated
and di-iodinated125I-Tyr3-octreotide by HPLC analysis. In vitro and in vivo stabilities of125I-Tyr3-octreotide and111In-DTPA-D-Phe1-octreotide were also determined. Both radiolabeled compounds were relatively stable in vitro, but were decomposed to free125I− and111In-DTPA in vivo, respectively.
Authors:Y. Li, Y. Wang, C. Liu, J. Zhang, L. Jian, and C. He
Systematically complicated technique used for preparing high-intensity (more than 8.0 GBq/cm2)241Am -source by a new enamel technique is presented. High intensity241Am -sources with activities ranging from 3.7 to 37 GBq have been made by this new technique. The activity and photon output have been measured. The results were compared with the data reported by the Radiochemical Centre Amersham in their specification. The photon output of241Am -source produced by us meets the technical specification of241Am -sources produced by Amersham. Moreover, the highest intensity can reach 1789 mCi/cm2. The overall utilization ratio of241Am activity (59.5 keV) is 31.2%.
Authors:S. Xiu, H. K. Rojanala, A. Shahbazi, E. H. Fini, and L. Wang
Pyrolysis and combustion characteristics of bio-oil derived from swine manure were investigated using thermogravimetry techniques. Thermogravimetric analysis of the bio-oils were carried out in O2 and N2 atmosphere under different heating rates (5–20 °C/min) to a maximum temperature of 900 °C. The results indicate that the combustion processes of bio-oil occurred in three stages, namely the water and the lighter compound evaporation, i.e., the release of the volatile compounds, ignition and burning of the heavier compounds (mainly carbon), and finally decomposition of the carbonate compounds. The effect of heating rate was also studied, and higher heating rates were found to facilitate the combustion process. Different reaction kinetic mechanisms were used to treat TG data, and showed that diffusion models are the best fit for describing the combustion of bio-oil in air. The kinetic parameters of the three stages were determined using Coats–Redfern method. The study provided reliable basic data for the burning of bio-oil.
Authors:X. W. Liu, Y. L. Feng, H. R. Li, P. Zhang, and P. Wang
Thermal decomposition kinetics of magnesite were investigated using non-isothermal TG-DSC technique at heating rate (β) of 15, 20, 25, 35, and 40 K min−1. The method combined Friedman equation and Kissinger equation was applied to calculate the E and lgA values. A new multiple rate iso-temperature method was used to determine the magnesite thermal decomposition mechanism function, based on the assumption of a series of mechanism functions. The mechanism corresponding to this value of F(a), which with high correlation coefficient (r-squared value) of linear regression analysis and the slope was equal to −1.000, was selected. And the Malek method was also used to further study the magnesite decomposition kinetics. The research results showed that the decomposition of magnesite was controlled by three-dimension diffusion; mechanism function was the anti-Jander equation, the apparent activation energy (E), and the pre-exponential term (A) were 156.12 kJ mol−1 and 105.61 s−1, respectively. The kinetic equation was
and the calculated results were in accordance with the experiment.
Authors:S. Wang, L. Xiao, Y. Li, Z. Fang, G. Qiu, and J. Li
A dual cell system was used to study the electrogenerative leaching sphalerite-MnO2 under the conditions of presence and absence of Acidithiobacillus ferrooxidans (A. ferrooxidans). The polarization of anode and cathode, and the relationship between the electric quantity (Q) and some factors, such as the dissolved Zn2+, Fe2+, the time in the bio-electro-generating simultaneous leaching (BEGSL) and electro-generating simultaneous leaching (EGSL),
The results show that the dissolved Zn2+ in the presence of A. ferrooxidans is nearly 60% higher than that in the absence of A. ferrooxidans; the electrogenerative quantity in the former is about 134% more than that in the latter. A three-electrode system was applied
to study anodic and cathodic self-corrosion current, which was inappreciable compared with the galvanic current between sphalerite
and MnO2. The accumulated sulfur on the surface of sulfides produced in the electrogenerative leaching process could be oxidized in
the presence of A. ferrooxidans, and the ratio of biological electric quantity reached to 31.72% in 72 h.
The catalytic and accelerating effects of three coal-burning additives (CBA) on the burning of graphite were studied with
the help of thermogravimetric (TG) analysis. The kinetic study on the catalytic oxidation of the graphite doped with CBA was
carried out and the results were presented. The results show that the CBA can change the carbon oxidation/combustion course
by catalytic action and change the activation energy, thus improving the combustion efficiency.
Authors:X.-L. Zhou, Y. Yang, Z.-F. Li, B.-H. Wang, and Y.-M. Zhang
The effects of cisplatin and its trans isomer transplatin on the thermal denaturation of G-actin were studied with a Micro DSC-III differential scanning calorimeter. The denaturation enthalpy of G-actin was found to be 12 J g–1, and the denaturation temperature was 328 K. The thermal denaturation curve showed that increasing cisplatin concentration decreased the enthalpy change. However, after the ratio of cisplatin to G-actin attained 8:1 (mol:mol), the denaturation enthalpy no longer decreased. Transplatin decreased the enthalpy change more rapidly. In contrast with cisplatin, the denaturation peak at 328 K disappeared, and a strong exothermic peak appeared at 341 K when the ratio of transplatin to G-actin was 8:1 (mol:mol). The enthalpy change was 75 J g–1, which is far in excess of the range of weak interactions. This strong exothermic phenomenon probably reflects the agglutination of protein. The effects of cisplatin and transplatin on the number of the free thiol groups of G-actin are discussed.
Authors:S. A. Malik, L. Wang, M. A. Paget, F. Biddlestone, and G. F. Fernando
The authors have previously reported on an optical technique to enable the simultaneous and non-contact acquisition of spectral, thermal and physical information of a sample in a differential scanning calorimeter (DSC). This was achieved using a simple bifurcated fibre optic probe to link the DSC to a conventional Fourier transform infrared spectrometer and an optical spectrum analyser. The fibre optic probe was located over the sample and reference compartments of the DSC. In the current study, a series of experiments were designed to investigate the stability of DSC pans during heating from ambient to 230 °C. During the first heating cycle, the base of the aluminium pans used in these experiments was found to deform in a non-linear manner. The deformation characteristics of pans manufactured from copper and steel were also investigated. Annealing the aluminium pans was found to improve significantly the deformation or expansion characteristics.