Search Results
You are looking at 1 - 4 of 4 items for
- Author or Editor: D. García-López x
- Refine by Access: All Content x
Summary The disposal of used automotive tires has caused many environmental and economical problems to most countries. We propose the use of rice husk as filler for increasing the value of recycled tire rubber. Thermal degradation of both components and their sintering mixtures is presented in this paper. Thermal decomposition of rice husk occurs in various steps in the temperature range between 150 and 550°C. This complex process is the result of the overlapping of thermal decomposition of the three major constituents common in all lignocellulosic materials, i.e., hemicellulose, lignin and cellulose. Hemicellulose is degraded at temperatures between 150 and 350°C, cellulose from 275 to 380°C and lignin from 250 to 550°C. The degradation process of major constituents of scrap tires or their composites is observed at temperatures between 150 and 550°C. For composites, the addition of rice husk (maximum 25%) produces an increase in the mass loss rate. This effect is higher as the amount of rice husk increases. However, the degradation initial temperature of elastomeric matrix is not affected with addition of rice husk. Apparent kinetic parameters were also studied by the isoconversional Friedman method. We observed that the addition of rice husk produces a decrease in apparent activation energy for low conversions (up to 0.6). For higher conversions this decrease was not so clearly observed.
Abstract
The experimental dependence of the α,f andT n parameters, in function of the water thickness, for different irradiation channels of Triga Mark III reactor, were analyzed. An exponential law for the α(r) dependence was obtained in the neighborhood of the active zone of the reactor numerically modelated using theS n method for 69 neutrons groups, and this dependence is slower in light water reactors than in graphite reactors.
Abstract
The objective of the present study was the elaboration of a procedure for the determination of Y, La, Ce, Pr and Nd in soils by spectrophotometry with Arsenazo III preceded by a separation-concentration stage, which includes coprecipitation and ion exchange. Multielement analysis by energy dispersive X-ray fluorescence (including Y, La, Ce and Nd) and flame atomic absorption spectrophotometry was carried out simultaneously in order to obtain a general characterization of the soil samples. Certified reference materials and statistical intercomparison of the obtained results were used to evaluate the accuracy of the methods. The precision was examined by analyzing replicate samples.
In order to ascertain whether differing structural mechanisms could underlie blood flow restricted training (BFRT) and high intensity training (HIT), this study had two aims: (i) to gain an insight into the acute variations of muscle architecture following a single bout of two different volumes of BFRT, and (ii) to compare these variations with those observed after HIT. Thirty-five young men volunteered for the study and were randomly divided into three groups: BFRT low volume (BFRT LV), BFRT high volume (BFRT HV) and traditional high intensity resistance training (HIT). All subjects performed a bilateral leg extension exercise session with a load of 20% of one repetition maximum (1RM) in the BFRT groups, whereas the load of the HIT group was equivalent to an 85% of their 1RM. Before and immediately after the exercise bout, ultrasound images were taken from the rectus femoris (RF) and the vastus lateralis (VL). All groups increased their RF (p < 0.001) and VL (p < 0.001) muscle thickness, while the increases in pennation angle were larger in HIT as compared to BFRT LV (p = 0.013) and BFRT HV (p = 0.037). These results support the hypothesis that acute muscle cell swelling may be involved in the processes underlying BFRT induced muscle hypertrophy. Furthermore, our data indicate differing structural responses to exercise between BFRT and HIT.
