Search Results
You are looking at 1 - 6 of 6 items for
- Author or Editor: M. Kessler x
- Refine by Access: All Content x
Abstract
Synthesis and curing activity of latent ring-opening metathesis polymerization (ROMP)-based catalytic systems are reported using polydicyclopentadiene (pDCPD) as a model system. Differential scanning calorimetry (DSC) is used to monitor the ROMP reactions and to characterize the cured networks. These systems are either slow or completely inactive at ambient temperatures, yet at high temperatures the superior curing activity of other ROMP catalysts are retained. The resulting thermosets show glass transition temperatures from 10 to 25 °C higher than when cured with other ROMP catalysts.
Abstract
Three-phase cyanate ester adhesives have been developed using a bisphenol E cyanate ester resin, fumed silica, and negative-CTE (coefficient of thermal expansion) reinforcements: short carbon fiber or zirconium tungstate (ZrW2O 8 ). Fumed silica was used to impart thixotropic behavior on the resin and decrease settling in the adhesives. The cured composites were evaluated using various thermal analysis techniques for their thermal-mechanical properties. Composites with short carbon fiber showed enhanced modulus and decreased thermal expansion (70% reduction for 20 vol%) and showed little phase separation. While settling of the dense ceramic particles could not be completely eliminated for the zirconium tungstate composites through rheological modification of the adhesive with added fumed silica, a reduction in CTE of 84% was achieved in the composite (58 vol%) compared to the neat resin. In addition, the effect of thermal history on the cure and temperature induced ZrW2O8 phase transitions, and their corresponding influence on thermal strains vs. temperature, are examined by thermomechanical analysis.
Abstract
Resin injection repair is a common method to repair delamination damage in polymer matrix composites (PMCs). To repair high-temperature PMCs, the resin should have a very low viscosity, yet cure into a compatible adhesive with high temperature stability. Normally, thermosetting polymers with high glass transition temperatures (T g) are made from monomers with high room temperature viscosities. Among the high temperature resins, bisphenol E cyanate ester (BECy, 1,1’-bis(4-cyanatophenyl)ethane), is unique because it has an extremely low viscosity of 0.09–0.12 Pa s at room temperature yet polymerizes as a cross-linked thermoset with a high T g of 274°C. BECy monomer is cured via a trimerization reaction, without volatile products, to form the high T g amorphous network. In this study, the cure kinetics of BECy is investigated by differential scanning calorimetry (DSC). Both dynamic and isothermal experiments were carried out to obtain the kinetic parameters. An autocatalytic model was successfully used to model isothermal curing. The activation energy from the autocatalytic model is 60.3 kJ mol−1 and the total reaction order is about 2.4. The empirical DiBenedetto equation was used to evaluate the relationship between T g and conversion. The activation energy of BECy from the dynamic experiments is 66.7 kJ mol−1 based on Kissinger’s method, while isoconversional analysis shows the activation energy changes as the reaction progresses.
Abstract
The ring-opening metathesis polymerization (ROMP) kinetics of three different norbornene-based monomers, ethylidene norbornene (ENB), endo-dicyclopentadiene (DCPD) and exo-DCPD, in the presence of Grubbs’ catalyst are examined using differential scanning calorimetry and rheokinetic viscosity measurements. Several different parameters were considered, such as, the monomer healing agents (including different monomer mixtures), the catalyst concentration, and test temperature to determine how these parameters influence cure development. The polymerization kinetics, quantified by exothermic peak locations in the case of differential scanning calorimetry and rheokinetic transition times in the case of viscosity measurements, are shown to be highly dependent on monomer type and catalyst concentration. The ENB monomer had the fastest kinetics even at the lowest catalyst concentration compared to the other diene monomers and mixtures.
Abstract
The addition of suitable cross-linking agents with norbornene-based monomers has significant effects on the thermal properties of the resulting polymers formed by olefin metathesis. Ethylidene norbornene (ENB) and endo-dicyclopentadiene (endo-DCPD) were mixed separately with various loadings of three different cross-linking agents and then polymerized with the addition of Grubbs’ catalyst. The polymerization kinetics and resulting glass transition temperature (T g) of the systems were evaluated by differential scanning calorimetry (DSC). The addition of the first cross-linking agent, norbornadiene (CL-1), to both endo-DCPD and ENB resulted in decreasing glass transition temperatures with increasing concentrations. In contrast, the addition of the other two cross-linking agents (CL-2 and CL-3), which were both custom synthesized bifunctional norbornyl systems, to both endo-DCPD and ENB resulted in a monotonic increases in T g with cross-linker concentration. By tailoring the loading of these custom cross-linking agents, the properties of these polymer systems can be controlled for various applications, including self-healing composites.
Isothermal cure characterization of dicyclopentadiene
The glass transition temperature and conversion
Abstract
Conversion (α) and the glass transition temperature (T g) were investigated during the isothermal cure of endo-dicyclopentadiene (DCPD) with a Grubbs catalyst for different temperatures using differential scanning calorimetry. Conversion vs. In (time) data at an arbitrary reference temperature were superposed by horizontal shift and the shift factors were used to calculate an Arrhenius activation energy. Glass transition temperature vs. conversion data fell on a single curve independent of cure temperature, implying that reaction of the norbornene and cyclopentene ring of DCPD proceeds in a sequential fashion. Implications of the isothermal reaction kinetics for self-healing composites are discussed.
