Search Results
You are looking at 1 - 2 of 2 items for
- Author or Editor: M. Mouzai x
- Refine by Access: All Content x
Abstract
Traditional medicinal seeds prescribed for specific treatment purposes, were purchased from local markets and analyzed by INAA. The samples were irradiated at Es-Salam research reactor, at a power of 5 MW for 6 h. The accuracy of the method was established by analyzing reference materials. Twenty elements were measured, with good accuracy and reproducibility. The concentration of elements determined, was found to vary depending on the seeds. The daily intake of essential and toxic elements was determined, and compared with the recommended values. The probable cumulative intake of toxic elements is well below the tolerance limits.
Abstract
This work explored the impact of mixed flow spray drying on the physical and functional properties of whey powder without any subsequently added drying agent to increase whey utilisation. Spray drying was performed on a pilot scale using a mixed flow spray dryer. The effects of the inlet air temperature (150–210 °C) and feed flow rate (2–7 L h−1) on several responses such as moisture content, yield, dispersibility, bulk density, and outlet air temperature were investigated using response surface methodology. In addition, with the optimised parameters, Carr index, Hausner ratio, solubility, wettability, hygroscopicity, degree of caking, crystallinity, and morphology of the obtained whey powder were determined. The investigation revealed that feed flow rate is the main parameter influencing all responses. The inlet air temperature significantly affected the bulk, tapped density, and outlet air temperature. The optimal inlet air temperature and feed flow rate for the production of whey powder were 182 °C and 3.2 L h−1, respectively. Under these parameters the moisture content, yield, bulk density, hygroscopicity, and degree of caking of the obtained product were 28.6, 1.80%, 0.24 g cm−3, 16.10 g H2O/g powder, and 85.56%, respectively.
