Search Results

You are looking at 1 - 8 of 8 items for

  • Author or Editor: O. Egorov x
  • Refine by Access: All Content x
Clear All Modify Search

Abstract  

A rapid automated flow injection analysis (FIA) procedure was developed for efficient separation of Am and Pu from each other and from interfering matrix and radionuclide components using a TRU-resincolumn. Selective Pu elution is enabled via on-column reduction. The separation was developed using on-line radioactivity detection. After the separation had been developed, fraction collection was used to obtain the separated fractions. In this manner, a FIA instrument functions as an automated separation workstation capable of unattended operation.

Restricted access

Summary  

A fully automated analysis procedure and instrument for the measurement of total 99Tc in aged nuclear waste has been developed. The overall analysis approach is based on a fully automated wet radiochemical analysis method. Microwave-assisted sample oxidation is used prior to a chemical separation step in order to oxidize all of the non-pertechnetate species to pertechnetate. Separation of the pertechnetate from interfering radioactive and stable matrix species is carried out using an anion-exchange column. The separated 99Tc is quantified using a flow-through solid cell scintillation detector. The instrument is capable of an analysis time of <13 minute per sample with a detection limit of 2000 dpm/ml. Nuclear waste samples from the Hanford site with a high content of non-pertechnetate species were successfully analyzed using this method.

Restricted access
Journal of Radioanalytical and Nuclear Chemistry
Authors: V. Kazarinov, G. Egorov, O. Afanas'ev, and E. Nazin
Restricted access

Abstract  

Determination of lead-210 in bottom sediments is applied for evaluation of sedimentation rates and sediments ages by concentration profiles of disequilibrated lead-210 from atmospheric sources. Advences in low level liquid scintillation spectrometry (LS) fitted for natural radioactivity measurements, permit to combine the possibility of immediate bismuth-210 separation with its radioactivity registration using LS spectrometer Quantulus (LKB-1220, Wallak, Finland). The method was tested on bottom sediment samples from Baltic Sea shelf, collected during the 76th cruise of RV Academician S. Vavilov. The proposed method of separation, purification and chemical yield determination is characterized by simplicity, rapidity and may be used in routine analysis.

Restricted access

Summary  

Direct alpha-energy spectroscopy in liquids is possible by placing a chemically selective polymer thin film upon the surface of passivated silicon diodes. By utilizing polymer thin films with high affinity for actinides, we have been able to selectively concentrate actinides of interest upon the diode surface, resulting in a substantial increase in sensitivity relative to a direct measurement. With this film coated diodes, we were able to obtain in-situ alpha spectra with energy resolution comparable to that of conventional alpha-spectroscopy. The response of the thin film coated diode was found to be linear over 104. The sensitivity and reversibility is a function of the membrane complexation chemistry.

Restricted access

Summary  

The determination of transuranic (TRU) content in nuclear wastes, reactor materials, process solutions, and various other matrices is required in support of material assessment, environmental restoration, and waste processing activities. We have found that direct measurement of TRU is possible using surface passivated ion implanted planar silicon diode detectors. The performance and durability of modern silicon diodes enables direct detection of alpha-particles, with retention of some spectral information, through small air gaps or under direct contact with liquid or solid samples. We will present results on the performance of silicon diode detectors for the determination of TRU in liquids.

Restricted access

Abstract  

Characterization of SuperLig® 620 solid phase extraction resin was performed in order to develop an automated on-line process monitor for 90Sr. The main focus was on strontium separation from barium, with the goal of developing an automated separation process for 90Sr in high-level wastes. High-level waste contains significant 137Cs activity, of which 137mBa is of great concern as an interference to the quantification of strontium. In addition barium, yttrium and plutonium were studied as potential interferences to strontium uptake and detection. A number of complexants were studied in a series of batch Kd experiments, as SuperLig® 620 was not previously known to elute strontium in typical mineral acids. The optimal separation was found using a 2 M nitric acid load solution with a strontium elution step of ~0.49 M ammonium citrate and a barium elution step of ~1.8 M ammonium citrate. 90Sr quantification of Hanford high-level tank waste was performed on a sequential injection analysis microfluidics system coupled to a flow-cell detector. The results of the on-line procedure are compared to standard radiochemical techniques in this paper.

Restricted access

Summary  

An analytical system is suggested to separate a number of elements of the Periodic Table in a hydrogen or oxygen stream at temperatures up to 1400 °C. High temperature chemical filters are used to separate volatile products. The approach has demonstrated its efficiency in a number of examples of carrier-free isotope production from targets irradiated at an accelerator: 109Cd from In; 22Na from Al; 72Se from GaAs; 188Pt, 183Re, 185Os and 201Tl from Pb or Bi; separation of Po from Pb and Bi, etc. Another application of high temperature chemical sublimation of elements and oxides was realized in activation analysis of noble metals in various ores and samples.

Restricted access