Authors:Mary Alves, Soraia Souza, S. Lima, E. Longo, A. Souza, and Iêda Santos
CaSnO3 was synthesized by the polymeric precursor
method, using different precursor salts as (CH3COO)2CaH2O,
CaCl22H2O and CaCO3,
leading to different results. Powder precursor was characterized using thermal
analysis. Depending on the precursor different thermal behaviors were obtained.
Results also indicate the formation of carbonates, confirmed by IR spectra.
After calcination and characterization by XRD, the formation of perovskite
as single phase was only identified when calcium acetate was used as precursor.
For other precursors, tin oxide was observed as secondary phase.
Authors:F. Vieira, Soraia Souza, A. Oliveira, S. Lima, E. Longo, C. Paskocimas, L. Soledade, A. Souza, and Iêda Santos
In this study undoped and Cr, Sb or Mo doped TiO2 were synthesized by polymeric precursor method and characterized by X-ray diffraction, UV–VIS spectroscopy, infrared spectroscopy
and thermogravimetry (TG). The TG curves showed a continuous mass loss assigned to the hydroxyl elimination and Cr6+ reduction. Doped TiO2 samples showed a higher mass loss assigned to water and gas elimination at lower temperatures. In these doped materials a
decrease in the anatase–rutile phase transition temperature was observed. After calcination at 1,000 °C, rutile was obtained
as a single phase material without the presence of Cr6+.
Authors:A. de Oliveira, J. Ferreira, Márcia Silva, Soraia de Souza, F. Vieira, E. Longo, A. Souza, and Iêda Santos
NiWO4 and ZnWO4 were synthesized by the polymeric precursor method at low temperatures with zinc or nickel carbonate as secondary phase.
The materials were characterized by thermal analysis (TG/DTA), infrared spectroscopy, UV–Vis spectroscopy and X-ray diffraction.
NiWO4 was crystalline after calcination at 350 °C/12 h while ZnWO4 only crystallized after calcination at 400 °C for 2 h. Thermal decomposition of the powder precursor of NiWO4 heat treated for 12 h had one exothermic transition, while the precursor heat treated for 24 h had one more step between
600 and 800 °C with a small mass gain. Powder precursor of ZnWO4 presented three exothermic transitions, with peak temperatures and mass losses higher than NiWO4 has indicating that nickel made carbon elimination easier.
Authors:Soraia de Souza, Mary Alves, A. de Oliveira, E. Longo, F. Ticiano Gomes Vieira, Rodinei Gomes, L. Soledade, A. de Souza, and Iêda Garcia dos Santos
In this work, the synthesis of Nd-doped SrSnO3 by the polymeric precursor method, with calcination between 250 and 700 °C is reported. The powder precursors were characterized
by TG/DTA and high temperature X-ray diffraction (HTXRD). After heat treatment, the material was characterized by XRD and
infrared spectroscopy. Ester and carbonate amounts were strictly related to Nd-doping. According to XRD patterns, the orthorhombic
perovskite was obtained at 700 °C for SrSnO3 and SrSn0.99Nd0.01O3. For Sr0.99Nd0.01SnO3, the kinetics displayed an important hole in the crystallization process, as no peak was observed in HTXRD up to 700 °C,
while a XRD patterns showed a crystalline material after calcination at 250 °C.
Authors:Mary Alves, Soraia Souza, Márcia Silva, Elaine Paris, S. Lima, R. Gomes, E. Longo, A. de Souza, and Iêda Garcia dos Santos
SrSnO3 was synthesized by the polymeric precursor method with elimination of carbon in oxygen atmosphere at 250 °C for 24 h. The
powder precursors were characterized by TG/DTA and high temperature X-ray diffraction (HTXRD). After calcination at 500, 600
and 700 °C for 2 h, samples were evaluated by X-ray diffraction (XRD), infrared spectroscopy (IR) and Rietveld refinement
of the XRD patterns for samples calcined at 900, 1,000 and 1,100 °C. During thermal treatment of the powder precursor ester
combustion was followed by carbonate decomposition and perovskite crystallization. No phase transition was observed as usually
presented in literature for SrSnO3 that had only a rearrangement of SnO6 polyhedra.