Search Results
You are looking at 1 - 6 of 6 items for
- Author or Editor: Wiesława Nocuń-Wczelik x
- Refine by Access: All Content x
Abstract
In this study the calorimeter was applied to follow the early hydration of mixtures produced using three different synthetic slag vitreous materials, differing with alumina to silica ratio and mixed or not with synthetic two different metakaolin additions (kaolin heated with sodium containing admixture or without admixture). These mixtures were processed with sodium/potassium hydroxide solutions and placed inside the chamber of calorimeter. The kinetics of hydration process was thus characterized and the hydraulic properties of slag–metakaolin mixtures were very well assessed. Substantial heat evolution was found in the presence of activators, in many cases exceeding 100 J g–1 for 24 h process; heat evolved on hydration with water only was very poor, below 20 J g–1 after 24 h. The rate of heat evolution vs. time plots showed specific shape, more or less similar to the typical heat evolution curves reported for cements. Finally, some conclusions were drawn and the amount/concentration of activators was selected for further studies.
Abstract
The effect of PbO on cement hydration kinetics by calorimetric method was evaluated as a first step in this project. Substantial retardation of reaction with water at early stages with subsequent intensification of the process was found. As the next step, the model systems covering pure cement minerals and their mixtures of various composition as well as soluble Pb salts were taken into account to elucidate the mechanism of delayed, by quite good formation of products in the so-called post-induction period. The precipitation of sulphate, forming very thin impermeable layer seems to be responsible for this delaying effect in case of cement, however the other reactions of Pb compounds in alkaline environment of hydrating calcium silicate are not out of importance. In order to prove this, the studies of chemical composition in small areas were also carried out.
Abstract
The rate of heat evolution as well as total heat output are strongly affected by other components of hydrating mixture, apart from neat portland cement, such as slag, fly ash and other industrial by-products; among them the wastes from fluidised bed combustion (FBC) has been taken into account recently. In this study the calorimeter was applied to follow the early hydration of cements produced with these materials. They interact with cement paste in a few ways: as set controlling agent and as active pozzolanic admixtures. Thus the rate of heat evolution/hydration is modified, depending on the composition of clinker and percentage of waste in the mixture. After the series of measurements for clinker-waste mixture hydrated systems also some ‘model’ mixtures were investigated to separate the effects from particular waste components.
Abstract
Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles.
Calorimetry in the studies of cement hydration
Setting and hardening of Portland cement–calcium aluminate cement mixtures
Abstract
Calorimetry was applied to an investigation of the early hydration of Portland cement (PC)–calcium aluminate cement (CAC) pastes. The heat evolution measurements were related to the strength tests on small cylindrical samples and standard mortar bars. Different heat-evolution profiles were observed, depending on the calcium aluminate cement/Portland cement ratio. The significant modification of Portland cement heat evolution profile within a few hours after mixing with water was observed generally in pastes containing up to 25% CAC. On the other hand the CAC hydration acceleration effect was also obtained with the 10% and 20% addition of Portland cement. As one could expect the compressive and flexural strength development was more or less changed—reduced in the presence of larger amount of the second component in the mixture, presumably because of the internal cracks generated by expansive calcium sulfoaluminate formation.
Abstract
The so-called pozzolanic activity of waste catalysts from fluidised cracking was investigated. For this purpose a series of cement mixtures with this waste material were prepared and subsequently the pastes and mortars were produced. Waste aluminosilicate catalyst was used both in raw form and after grinding in a ball mill for 60 min. The hydrating mixtures were subjected to the calorimetric measurements in a non-isothermal/non-adiabatic calorimeter. After an appointed time of curing the hydrating materials were studied by thermal analysis methods (TG, DTG, DTA). The pozzolanic activity factors were determined, basing on the compressive strength data. The increased activity of cement — ground pozzolana systems has been thus proved. An accelerated Ca(OH)2 consumption as well as higher strength were found for materials containing ground waste catalyst, as compared to those, mixed with the raw one. Thus grinding was also proved to result in mechanical activation in the case of the waste catalyst from fluidised cracking.
