Synthesis, characterization and thermal analysis of polyaniline (PANI)/ZrO2 composite and PANI was reported in our early work. In this present, the kinetic analysis of decomposition process for these
two materials was performed under non-isothermal conditions. The activation energies were calculated through Friedman and
Ozawa-Flynn-Wall methods, and the possible kinetic model functions have been estimated through the multiple linear regression
method. The results show that the kinetic models for the decomposition process of PANI/ZrO2 composite and PANI are all D3, and the corresponding function is ƒ(α)=1.5(1−α)2/3[1−(1-α)1/3]−1. The correlated kinetic parameters are Ea=112.7±9.2 kJ mol−1, lnA=13.9 and Ea=81.8±5.6 kJ mol−1, lnA=8.8 for PANI/ZrO2 composite and PANI, respectively.
Nano-ZnO flakes were synthesized by calcination of the precursor of Zn(OH)2 obtained via the reactive ion exchange method between an ion exchange resin and ZnSO4 solution at room temperature. Scanning electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscope, UV-Vis
diffuse reflection spectrum and Na2EDTA titration were used to characterize the structure features and chemical compositions of the as-prepared ZnO. The results
show that the as-prepared ZnO flakes have uniform structure and high purity. Heat capacities in the temperature range of 83
to 396 K were measured. The measured heat capacities values were compared with those of coarse crystal powders and the difference
between this two heat capacity curves was analyzed.
Authors:S. Yu, S. Wang, Z. Tan, C. Liao, and Y. Li
A novel AB2-type monomer diethyl 5-(4-hydroxyethoxyphenylazo)isophthalate for preparing hyperbranched azo polymers (HBPAZO) was synthesized.
The monomer obtained was characterized by IR spectra, UV–Vis spectra, 1H NMR spectrum and C NMR spectrum. The TG-DTG/DTA curves show that the decomposition of the monomer proceeds in four steps.
During the second-step decomposition, the mass loss occurs between 480.5 K and 579.0 K and the phenomena of condensing to
HBPAZO for the melted monomer was found. So it is inferred that this temperature range is the best for polycondensation of
the melted monomer, which is very important for synthesizing of HBPAZO.
Authors:L. Xiao, Y. Li, S. Wang, Z. Fang, and G. Qiu
The principle for the electro-generative simultaneous leaching (EGSL) is applied to simultaneous leaching of pyrite-MnO2 in this paper. A galvanic system for the bio-electro-generative simultaneous leaching (BEGSL) has been set up. The equation
of electric quantity vs. time is used to study the effect of produced sulfur on electro-generative efficiency and quantity. It has been shown that
the resistance decreased in the presence of Acidithiobacillus thiooxidans (A. thiooxidans) with the increase of electro-generative efficiency. The effects of temperature and grain size on rate of ferrous extraction
from pyrite under the conditions of presence and absence of A. thiooxidans were studied, respectively. The changes in the extraction rate of Fe2+ as particle size in presence of A. thiooxidans were more evident than that in the absence, which indicated that the extraction in bio-electro-generative leaching was affected
by particle size remarkably. Around the optimum culture temperature for A. thiooxidans, the bigger change in the conversion rate of Fe2+ was depending on temperature. The transferred charge in BEGSL including part of S0 to sulfate group in the presence of (A. thiooxidans) which is called as biologic electric quantity, and the ratio of biologic electric quantity reached to 58.10% in 72 h among
the all-transferred charge.
Authors:H. Li, Y. Ujihira, S. Tanaka, T. Yamashita, and K. Horie
Positron annihilation lifetime measurements of PMMA, PEMA, PiPMA, PnPMA and PnBMA were performed in the temperature range between 15 and 300 K, where , and relaxational transitions occur for these polyalkylmethacrylates. The variations of free volume size and content calculated from the longest lifetime component against temperature are correlated to the results obtained by dielectric, viscoelastic and dynamic mechanical relaxation data of the polymers. The variations of free volume sizes and contents, apparent free volume fraction and size distribution of the polyalkylmethacrylates are well correlated with the rotational transitions of side chains. The location of free volumes, in which positronium annihilates can be estimated near the vicinity of alkyl groups bound to oxygen atom of side ester chains.
A separation procedure of trace platinum from large amounts of mercury and other interfering elements is described. After irradiation, the HgO target was dissolved in concentrated HCl solution. The thallium fraction was removed by solvent extraction with ether. In the aqueous phase after extraction the radioisotope of platinum produced by irradiation was precipitated as (NH4)2PtCl6 by adding a saturated solution of NH4Cl in the presence of H2PtCl6·6H2O as stable carrier. The decontamination factor of mercury, gold and thallium and the recovery of platinum in the process of separation are satisfactory.
Authors:C. Liu, Y. Zhao, S. Li, H. Teng, and Z. Wang
The concentration of radon in an underground research facility (URF) was measured by setting up 12 sampling points in the
URF and with 3 different measurement methods. All the methods were calibrated in the radon laboratory of the No. 6 Institute
of Nuclear Industry. The accumulation of radon in the URF was observed before a ventilation system was applied. The reduction
of radon concentration in the URF by 1-hour ventilation was also observed. Experimental result indicates that the concentration
of radon in the URF increased from 15 to 50 Bq·m−3 in 5 days without ventilation, and decreased to less than 10 Bq·m−3 with 1-hour ventilation. Applying the average working time of 4 hours per day of the workers in the URF, the additional effective
dose is 0.75 msv·y−1 when 1 hour ventilation is applied before entering the URF and 13 mSv·y−1 without ventilation. These figures strongly suggest that for the health of the workers, ventilation in such underground research
facilities is needed.
Conducting polyaniline/Cobaltosic oxide (PANI/Co3O4) composites were synthesized for the first time, by in situ deposition technique in the presence of hydrochloric acid (HCl)
as a dopant by adding the fine grade powder (an average particle size of approximately 80 nm) of Co3O4 into the polymerization reaction mixture of aniline. The composites obtained were characterized by infrared spectra (IR)
and X-ray diffraction (XRD). The composition and the thermal stability of the composites were investigated by TG-DTG. The
results suggest that the thermal stability of the composites is higher than that of the pure PANI. The improvement in the
thermal stability for the composites is attributed to the interaction between PANI and nano-Co3O4.